mt76: update to the latest version, import WED related mtk_eth_soc patches

6c256218e59e wifi: mt76: dma: use napi_build_skb
679254c50f27 mt7915: add CONFIG_MT76_LEDS to cflags
15b9dd6b1b6a wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work
8e5c21fe7c5c wifi: mt76: mt7915: rework mt7915_mcu_set_thermal_throttling
87cb74fe42d9 wifi: mt76: mt7915: rework mt7915_thermal_temp_store()
c6f24b83eba5 wifi: mt76: mt7915: add error message in mt7915_thermal_set_cur_throttle_state()
99e96b89ee4d wifi: mt76: mt7915: add chip id condition in mt7915_check_eeprom()
833cd420480f wifi: mt76: mt7921: fix channel switch fail in monitor mode
f1f8bae6092d wifi: mt76: mt7921: add ack signal support
f47087a6dd62 wifi: mt76: mt7996: fix chainmask calculation in mt7996_set_antenna()
2f3b0acc1588 wifi: mt76: mt7996: update register for CFEND_RATE
7e9540dcbd70 wifi: mt76: mt7996: do not hardcode vht beamform cap
a37e427d0959 wifi: mt76: connac: fix POWER_CTRL command name typo
98aa346042bd wifi: mt76: mt7915: remove BW160 and BW80+80 support
94fed6a43541 wifi: mt76: mt7921: fix invalid remain_on_channel duration
3c162384d80a wifi: mt76: introduce mt76_queue_is_wed_rx utility routine
a409a9454587 wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit
8b27ecd3a684 wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit
683760461dd0 wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup
0c750cf08f85 wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanup
5de9ae29bea2 wifi: mt76: mt7915: avoid mcu_restart function pointer
dad96dd3e62d wifi: mt76: mt7603: avoid mcu_restart function pointer
19d36dd9c8ea wifi: mt76: mt7615: avoid mcu_restart function pointer
6fe2c2383d3d wifi: mt76: mt7921: avoid mcu_restart function pointer
9df89143bf71 wifi: mt76: mt7915: get rid of wed rx_buf_ring page_frag_cache
8d51d11760cb wifi: mt76: fix switch default case in mt7996_reverse_frag0_hdr_trans
0d8057dbd51c wifi: mt76: mt7921u: add support for Comfast CF-952AX
ddbf4e933d54 wifi: mt76: mt7915: set sku initial value to zero
06a8904e954e wifi: mt76: mt7915: wed: enable red per-band token drop
724a337caef9 wifi: mt76: mt7915: fix WED TxS reporting
747ca943a5bb wifi: mt76: add flexible polling wait-interval support
133d7859977a wifi: mt76: mt7921: reduce polling time in pmctrl
5fe319a0550e wifi: mt76: add memory barrier to SDIO queue kick
822f060b9d19 wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistent
c6794954a723 wifi: mt76: mt7915: fix memory leak in mt7915_mmio_wed_init_rx_buf
9686cd7cc65c wifi: mt76: switch to page_pool allocator
04da4eaa8235 wifi: mt76: enable page_pool stats
1af4a911ebcb wifi: mt76: mt7915: release rxwi in mt7915_wed_release_rx_buf
e8c10835cf06 wifi: mt76: fix compile error without CONFIG_PAGE_POOL_STATS
0cf0ede7cc42 net: ethernet: mtk_wed: add reset to rx_ring_setup callback
715b3ed9708a net: ethernet: mtk_wed: add reset to tx_ring_setup callback
9107381d0ff3 wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
36d2a5bf7802 wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_val
c67f57d2cda2 wifi: mt76: dma: add reset to mt76_dma_wed_setup signature
3dace36e2941 wifi: mt76: dma: reset wed queues in mt76_dma_rx_reset
4b229d2da562 wifi: mt76: mt7915: add mt7915 wed reset callbacks
f83958376085 wifi: mt76: mt7915: complete wed reset support
321edbb414dc wifi: mt76: mt7996: rely on mt76_connac_txp_common structure
bdb7dc38a6d1 wifi: mt76: mt7996: rely on mt76_connac_txp_skb_unmap
8688756305c6 wifi: mt76: mt7996: rely on mt76_connac_tx_complete_skb
fbf986dbd4c0 wifi: mt76: mt7996: rely on mt76_connac2_mac_decode_he_radiotap
adc556cbce37 wifi: mt76: mt7996: avoid mcu_restart function pointer
5eb4e2303be4 wifi: mt76: remove __mt76_mcu_restart macro
e7a61c5f70f5 wifi: mt76: add EHT phy type
b375845abc10 wifi: mt76: connac: add CMD_CBW_320MHZ
68b17a243332 wifi: mt76: connac: add helpers for EHT capability
02ec1f61b3a2 wifi: mt76: connac: add cmd id related to EHT support
9209294cd81b wifi: mt76: increase wcid size to 1088
5e85136c9b2f wifi: mt76: add EHT rate stats for ethtool
a171f672fdeb wifi: mt76: mt7996: add variants support
eda8fd62c105 wifi: mt76: mt7996: add helpers for wtbl and interface limit
4a5a9f4cdc3b wifi: mt76: mt7996: rework capability init
06b73c155680 wifi: mt76: mt7996: add EHT capability init
ae71a1b8294f wifi: mt76: mt7996: add support for EHT rate report
65bdfae2991d wifi: mt76: mt7996: enable EHT support in firmware
b2360d59747c wifi: mt76: mt7996: add EHT beamforming support

Signed-off-by: Felix Fietkau <nbd@nbd.name>

1 files changed, 98 insertions, 0 deletions

diff --git a/target/linux/generic/backport-5.15/729-06-v6.1-net-ethernet-mtk_eth_soc-do-not-overwrite-mtu-config.patch b/target/linux/generic/backport-5.15/729-06-v6.1-net-ethernet-mtk_eth_soc-do-not-overwrite-mtu-config.patch
new file mode 100644
index 0000000000..f9e7caa27c
--- /dev/null
+++ b/target/linux/generic/backport-5.15/729-06-v6.1-net-ethernet-mtk_eth_soc-do-not-overwrite-mtu-config.patch
@@ -0,0 +1,98 @@
+From: Lorenzo Bianconi <lorenzo@kernel.org>
+Date: Thu, 17 Nov 2022 00:35:04 +0100
+Subject: [PATCH] net: ethernet: mtk_eth_soc: do not overwrite mtu
+ configuration running reset routine
+
+Restore user configured MTU running mtk_hw_init() during tx timeout routine
+since it will be overwritten after a hw reset.
+
+Reported-by: Felix Fietkau <nbd@nbd.name>
+Fixes: 9ea4d311509f ("net: ethernet: mediatek: add the whole ethernet reset into the reset process")
+Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -3175,6 +3175,30 @@ static void mtk_dim_tx(struct work_struc
+ 	dim->state = DIM_START_MEASURE;
+ }
+ 
++static void mtk_set_mcr_max_rx(struct mtk_mac *mac, u32 val)
++{
++	struct mtk_eth *eth = mac->hw;
++	u32 mcr_cur, mcr_new;
++
++	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
++		return;
++
++	mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
++	mcr_new = mcr_cur & ~MAC_MCR_MAX_RX_MASK;
++
++	if (val <= 1518)
++		mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1518);
++	else if (val <= 1536)
++		mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1536);
++	else if (val <= 1552)
++		mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1552);
++	else
++		mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_2048);
++
++	if (mcr_new != mcr_cur)
++		mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id));
++}
++
+ static int mtk_hw_init(struct mtk_eth *eth)
+ {
+ 	u32 dma_mask = ETHSYS_DMA_AG_MAP_PDMA | ETHSYS_DMA_AG_MAP_QDMA |
+@@ -3249,8 +3273,16 @@ static int mtk_hw_init(struct mtk_eth *e
+ 	 * up with the more appropriate value when mtk_mac_config call is being
+ 	 * invoked.
+ 	 */
+-	for (i = 0; i < MTK_MAC_COUNT; i++)
++	for (i = 0; i < MTK_MAC_COUNT; i++) {
++		struct net_device *dev = eth->netdev[i];
++
+ 		mtk_w32(eth, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(i));
++		if (dev) {
++			struct mtk_mac *mac = netdev_priv(dev);
++
++			mtk_set_mcr_max_rx(mac, dev->mtu + MTK_RX_ETH_HLEN);
++		}
++	}
+ 
+ 	/* Indicates CDM to parse the MTK special tag from CPU
+ 	 * which also is working out for untag packets.
+@@ -3366,7 +3398,6 @@ static int mtk_change_mtu(struct net_dev
+ 	int length = new_mtu + MTK_RX_ETH_HLEN;
+ 	struct mtk_mac *mac = netdev_priv(dev);
+ 	struct mtk_eth *eth = mac->hw;
+-	u32 mcr_cur, mcr_new;
+ 
+ 	if (rcu_access_pointer(eth->prog) &&
+ 	    length > MTK_PP_MAX_BUF_SIZE) {
+@@ -3374,23 +3405,7 @@ static int mtk_change_mtu(struct net_dev
+ 		return -EINVAL;
+ 	}
+ 
+-	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
+-		mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
+-		mcr_new = mcr_cur & ~MAC_MCR_MAX_RX_MASK;
+-
+-		if (length <= 1518)
+-			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1518);
+-		else if (length <= 1536)
+-			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1536);
+-		else if (length <= 1552)
+-			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_1552);
+-		else
+-			mcr_new |= MAC_MCR_MAX_RX(MAC_MCR_MAX_RX_2048);
+-
+-		if (mcr_new != mcr_cur)
+-			mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id));
+-	}
+-
++	mtk_set_mcr_max_rx(mac, length);
+ 	dev->mtu = new_mtu;
+ 
+ 	return 0;