aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic-2.6/files/include
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2008-10-18 21:43:30 +0000
committerFelix Fietkau <nbd@openwrt.org>2008-10-18 21:43:30 +0000
commit1e570a9288856bcd288a80115f2233c9c785706c (patch)
tree8491af08bde47e22f96c01e6f560206b3fd02a4a /target/linux/generic-2.6/files/include
parent487c622ac0c37f3cd26add56df9081ea7caf3835 (diff)
downloadupstream-1e570a9288856bcd288a80115f2233c9c785706c.tar.gz
upstream-1e570a9288856bcd288a80115f2233c9c785706c.tar.bz2
upstream-1e570a9288856bcd288a80115f2233c9c785706c.zip
change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
SVN-Revision: 13010
Diffstat (limited to 'target/linux/generic-2.6/files/include')
-rw-r--r--target/linux/generic-2.6/files/include/linux/gpio_buttons.h35
-rw-r--r--target/linux/generic-2.6/files/include/linux/gpio_dev.h11
-rw-r--r--target/linux/generic-2.6/files/include/linux/spi/spi_gpio.h53
-rw-r--r--target/linux/generic-2.6/files/include/linux/ssb/ssb.h404
-rw-r--r--target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_chipcommon.h396
-rw-r--r--target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_extif.h204
-rw-r--r--target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_mips.h46
-rw-r--r--target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_pci.h106
-rw-r--r--target/linux/generic-2.6/files/include/linux/ssb/ssb_regs.h357
9 files changed, 0 insertions, 1612 deletions
diff --git a/target/linux/generic-2.6/files/include/linux/gpio_buttons.h b/target/linux/generic-2.6/files/include/linux/gpio_buttons.h
deleted file mode 100644
index f5e6297258..0000000000
--- a/target/linux/generic-2.6/files/include/linux/gpio_buttons.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Definitions for the GPIO buttons interface driver
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: /include/linux/gpio_keys.h
- * The original gpio_keys.h seems not to have a license.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _GPIO_BUTTONS_H_
-#define _GPIO_BUTTONS_H_
-
-struct gpio_button {
- int gpio; /* GPIO line number */
- int active_low;
- char *desc; /* button description */
- int type; /* input event type (EV_KEY, EV_SW) */
- int code; /* input event code (KEY_*, SW_*) */
- int count;
- int threshold; /* count threshold */
-};
-
-struct gpio_buttons_platform_data {
- struct gpio_button *buttons;
- int nbuttons; /* number of buttons */
- int poll_interval; /* polling interval */
-};
-
-#endif /* _GPIO_BUTTONS_H_ */
-
diff --git a/target/linux/generic-2.6/files/include/linux/gpio_dev.h b/target/linux/generic-2.6/files/include/linux/gpio_dev.h
deleted file mode 100644
index 3f3c9c772c..0000000000
--- a/target/linux/generic-2.6/files/include/linux/gpio_dev.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _GPIODEV_H__
-#define _GPIODEV_H__
-
-#define IOC_GPIODEV_MAGIC 'B'
-#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10)
-#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11)
-#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12)
-#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13)
-#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14)
-
-#endif
diff --git a/target/linux/generic-2.6/files/include/linux/spi/spi_gpio.h b/target/linux/generic-2.6/files/include/linux/spi/spi_gpio.h
deleted file mode 100644
index 8e7d4b189d..0000000000
--- a/target/linux/generic-2.6/files/include/linux/spi/spi_gpio.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * spi_gpio interface to platform code
- *
- * Copyright (c) 2008 Piotr Skamruk
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _LINUX_SPI_SPI_GPIO
-#define _LINUX_SPI_SPI_GPIO
-
-#include <linux/types.h>
-#include <linux/spi/spi.h>
-
-
-/** struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
- * This structure holds information about a GPIO-based SPI device.
- *
- * @pin_clk: The GPIO pin number of the CLOCK pin.
- *
- * @pin_miso: The GPIO pin number of the MISO pin.
- *
- * @pin_mosi: The GPIO pin number of the MOSI pin.
- *
- * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
- *
- * @cs_activelow: If true, the chip is selected when the CS line is low.
- *
- * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
- * Note that doing no delay is not standards compliant,
- * but it might be needed to speed up transfers on some
- * slow embedded machines.
- *
- * @boardinfo_setup: This callback is called after the
- * SPI master device was registered, but before the
- * device is registered.
- * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
- */
-struct spi_gpio_platform_data {
- unsigned int pin_clk;
- unsigned int pin_miso;
- unsigned int pin_mosi;
- unsigned int pin_cs;
- bool cs_activelow;
- bool no_spi_delay;
- int (*boardinfo_setup)(struct spi_board_info *bi,
- struct spi_master *master,
- void *data);
- void *boardinfo_setup_data;
-};
-
-#endif /* _LINUX_SPI_SPI_GPIO */
diff --git a/target/linux/generic-2.6/files/include/linux/ssb/ssb.h b/target/linux/generic-2.6/files/include/linux/ssb/ssb.h
deleted file mode 100644
index 9d5da8b2cc..0000000000
--- a/target/linux/generic-2.6/files/include/linux/ssb/ssb.h
+++ /dev/null
@@ -1,404 +0,0 @@
-#ifndef LINUX_SSB_H_
-#define LINUX_SSB_H_
-
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-#include <linux/mod_devicetable.h>
-
-#include <linux/ssb/ssb_regs.h>
-
-
-struct pcmcia_device;
-struct ssb_bus;
-struct ssb_driver;
-
-struct ssb_sprom {
- u8 revision;
- u8 il0mac[6]; /* MAC address for 802.11b/g */
- u8 et0mac[6]; /* MAC address for Ethernet */
- u8 et1mac[6]; /* MAC address for 802.11a */
- u8 et0phyaddr; /* MII address for enet0 */
- u8 et1phyaddr; /* MII address for enet1 */
- u8 et0mdcport; /* MDIO for enet0 */
- u8 et1mdcport; /* MDIO for enet1 */
- u8 board_rev; /* Board revision number from SPROM. */
- u8 country_code; /* Country Code */
- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
- u16 pa0b0;
- u16 pa0b1;
- u16 pa0b2;
- u16 pa1b0;
- u16 pa1b1;
- u16 pa1b2;
- u8 gpio0; /* GPIO pin 0 */
- u8 gpio1; /* GPIO pin 1 */
- u8 gpio2; /* GPIO pin 2 */
- u8 gpio3; /* GPIO pin 3 */
- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
- u8 itssi_a; /* Idle TSSI Target for A-PHY */
- u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
- u16 boardflags_lo; /* Boardflags (low 16 bits) */
- u16 boardflags_hi; /* Boardflags (high 16 bits) */
-
- /* Antenna gain values for up to 4 antennas
- * on each band. Values in dBm/4 (Q5.2). Negative gain means the
- * loss in the connectors is bigger than the gain. */
- struct {
- struct {
- s8 a0, a1, a2, a3;
- } ghz24; /* 2.4GHz band */
- struct {
- s8 a0, a1, a2, a3;
- } ghz5; /* 5GHz band */
- } antenna_gain;
-
- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
-};
-
-/* Information about the PCB the circuitry is soldered on. */
-struct ssb_boardinfo {
- u16 vendor;
- u16 type;
- u16 rev;
-};
-
-
-struct ssb_device;
-/* Lowlevel read/write operations on the device MMIO.
- * Internal, don't use that outside of ssb. */
-struct ssb_bus_ops {
- u16 (*read16)(struct ssb_device *dev, u16 offset);
- u32 (*read32)(struct ssb_device *dev, u16 offset);
- void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
- void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
-};
-
-
-/* Core-ID values. */
-#define SSB_DEV_CHIPCOMMON 0x800
-#define SSB_DEV_ILINE20 0x801
-#define SSB_DEV_SDRAM 0x803
-#define SSB_DEV_PCI 0x804
-#define SSB_DEV_MIPS 0x805
-#define SSB_DEV_ETHERNET 0x806
-#define SSB_DEV_V90 0x807
-#define SSB_DEV_USB11_HOSTDEV 0x808
-#define SSB_DEV_ADSL 0x809
-#define SSB_DEV_ILINE100 0x80A
-#define SSB_DEV_IPSEC 0x80B
-#define SSB_DEV_PCMCIA 0x80D
-#define SSB_DEV_INTERNAL_MEM 0x80E
-#define SSB_DEV_MEMC_SDRAM 0x80F
-#define SSB_DEV_EXTIF 0x811
-#define SSB_DEV_80211 0x812
-#define SSB_DEV_MIPS_3302 0x816
-#define SSB_DEV_USB11_HOST 0x817
-#define SSB_DEV_USB11_DEV 0x818
-#define SSB_DEV_USB20_HOST 0x819
-#define SSB_DEV_USB20_DEV 0x81A
-#define SSB_DEV_SDIO_HOST 0x81B
-#define SSB_DEV_ROBOSWITCH 0x81C
-#define SSB_DEV_PARA_ATA 0x81D
-#define SSB_DEV_SATA_XORDMA 0x81E
-#define SSB_DEV_ETHERNET_GBIT 0x81F
-#define SSB_DEV_PCIE 0x820
-#define SSB_DEV_MIMO_PHY 0x821
-#define SSB_DEV_SRAM_CTRLR 0x822
-#define SSB_DEV_MINI_MACPHY 0x823
-#define SSB_DEV_ARM_1176 0x824
-#define SSB_DEV_ARM_7TDMI 0x825
-
-/* Vendor-ID values */
-#define SSB_VENDOR_BROADCOM 0x4243
-
-/* Some kernel subsystems poke with dev->drvdata, so we must use the
- * following ugly workaround to get from struct device to struct ssb_device */
-struct __ssb_dev_wrapper {
- struct device dev;
- struct ssb_device *sdev;
-};
-
-struct ssb_device {
- /* Having a copy of the ops pointer in each dev struct
- * is an optimization. */
- const struct ssb_bus_ops *ops;
-
- struct device *dev;
- struct ssb_bus *bus;
- struct ssb_device_id id;
-
- u8 core_index;
- unsigned int irq;
-
- /* Internal-only stuff follows. */
- void *drvdata; /* Per-device data */
- void *devtypedata; /* Per-devicetype (eg 802.11) data */
-};
-
-/* Go from struct device to struct ssb_device. */
-static inline
-struct ssb_device * dev_to_ssb_dev(struct device *dev)
-{
- struct __ssb_dev_wrapper *wrap;
- wrap = container_of(dev, struct __ssb_dev_wrapper, dev);
- return wrap->sdev;
-}
-
-/* Device specific user data */
-static inline
-void ssb_set_drvdata(struct ssb_device *dev, void *data)
-{
- dev->drvdata = data;
-}
-static inline
-void * ssb_get_drvdata(struct ssb_device *dev)
-{
- return dev->drvdata;
-}
-
-/* Devicetype specific user data. This is per device-type (not per device) */
-void ssb_set_devtypedata(struct ssb_device *dev, void *data);
-static inline
-void * ssb_get_devtypedata(struct ssb_device *dev)
-{
- return dev->devtypedata;
-}
-
-
-struct ssb_driver {
- const char *name;
- const struct ssb_device_id *id_table;
-
- int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id);
- void (*remove)(struct ssb_device *dev);
- int (*suspend)(struct ssb_device *dev, pm_message_t state);
- int (*resume)(struct ssb_device *dev);
- void (*shutdown)(struct ssb_device *dev);
-
- struct device_driver drv;
-};
-#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
-
-extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
-static inline int ssb_driver_register(struct ssb_driver *drv)
-{
- return __ssb_driver_register(drv, THIS_MODULE);
-}
-extern void ssb_driver_unregister(struct ssb_driver *drv);
-
-
-
-
-enum ssb_bustype {
- SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
- SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
- SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
-};
-
-/* board_vendor */
-#define SSB_BOARDVENDOR_BCM 0x14E4 /* Broadcom */
-#define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
-#define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
-/* board_type */
-#define SSB_BOARD_BCM94306MP 0x0418
-#define SSB_BOARD_BCM4309G 0x0421
-#define SSB_BOARD_BCM4306CB 0x0417
-#define SSB_BOARD_BCM4309MP 0x040C
-#define SSB_BOARD_MP4318 0x044A
-#define SSB_BOARD_BU4306 0x0416
-#define SSB_BOARD_BU4309 0x040A
-/* chip_package */
-#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
-#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
-#define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */
-
-#include <linux/ssb/ssb_driver_chipcommon.h>
-#include <linux/ssb/ssb_driver_mips.h>
-#include <linux/ssb/ssb_driver_extif.h>
-#include <linux/ssb/ssb_driver_pci.h>
-
-struct ssb_bus {
- /* The MMIO area. */
- void __iomem *mmio;
-
- const struct ssb_bus_ops *ops;
-
- /* The core in the basic address register window. (PCI bus only) */
- struct ssb_device *mapped_device;
- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
- u8 mapped_pcmcia_seg;
- /* Lock for core and segment switching.
- * On PCMCIA-host busses this is used to protect the whole MMIO access. */
- spinlock_t bar_lock;
-
- /* The bus this backplane is running on. */
- enum ssb_bustype bustype;
- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
- struct pci_dev *host_pci;
- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
- struct pcmcia_device *host_pcmcia;
-
-#ifdef CONFIG_SSB_PCIHOST
- /* Mutex to protect the SPROM writing. */
- struct mutex pci_sprom_mutex;
-#endif
-
- /* ID information about the Chip. */
- u16 chip_id;
- u16 chip_rev;
- u16 sprom_size; /* number of words in sprom */
- u8 chip_package;
-
- /* List of devices (cores) on the backplane. */
- struct ssb_device devices[SSB_MAX_NR_CORES];
- u8 nr_devices;
-
- /* Reference count. Number of suspended devices. */
- u8 suspend_cnt;
-
- /* Software ID number for this bus. */
- unsigned int busnumber;
-
- /* The ChipCommon device (if available). */
- struct ssb_chipcommon chipco;
- /* The PCI-core device (if available). */
- struct ssb_pcicore pcicore;
- /* The MIPS-core device (if available). */
- struct ssb_mipscore mipscore;
- /* The EXTif-core device (if available). */
- struct ssb_extif extif;
-
- /* The following structure elements are not available in early
- * SSB initialization. Though, they are available for regular
- * registered drivers at any stage. So be careful when
- * using them in the ssb core code. */
-
- /* ID information about the PCB. */
- struct ssb_boardinfo boardinfo;
- /* Contents of the SPROM. */
- struct ssb_sprom sprom;
-
- /* Internal-only stuff follows. Do not touch. */
- struct list_head list;
-#ifdef CONFIG_SSB_DEBUG
- /* Is the bus already powered up? */
- bool powered_up;
- int power_warn_count;
-#endif /* DEBUG */
-};
-
-/* The initialization-invariants. */
-struct ssb_init_invariants {
- struct ssb_boardinfo boardinfo;
- struct ssb_sprom sprom;
-};
-/* Type of function to fetch the invariants. */
-typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
- struct ssb_init_invariants *iv);
-
-/* Register a SSB system bus. get_invariants() is called after the
- * basic system devices are initialized.
- * The invariants are usually fetched from some NVRAM.
- * Put the invariants into the struct pointed to by iv. */
-extern int ssb_bus_ssbbus_register(struct ssb_bus *bus,
- unsigned long baseaddr,
- ssb_invariants_func_t get_invariants);
-#ifdef CONFIG_SSB_PCIHOST
-extern int ssb_bus_pcibus_register(struct ssb_bus *bus,
- struct pci_dev *host_pci);
-#endif /* CONFIG_SSB_PCIHOST */
-#ifdef CONFIG_SSB_PCMCIAHOST
-extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
- struct pcmcia_device *pcmcia_dev,
- unsigned long baseaddr);
-#endif /* CONFIG_SSB_PCMCIAHOST */
-
-extern void ssb_bus_unregister(struct ssb_bus *bus);
-
-extern u32 ssb_clockspeed(struct ssb_bus *bus);
-
-/* Is the device enabled in hardware? */
-int ssb_device_is_enabled(struct ssb_device *dev);
-/* Enable a device and pass device-specific SSB_TMSLOW flags.
- * If no device-specific flags are available, use 0. */
-void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags);
-/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */
-void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags);
-
-
-/* Device MMIO register read/write functions. */
-static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
-{
- return dev->ops->read16(dev, offset);
-}
-static inline u32 ssb_read32(struct ssb_device *dev, u16 offset)
-{
- return dev->ops->read32(dev, offset);
-}
-static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
-{
- dev->ops->write16(dev, offset, value);
-}
-static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
-{
- dev->ops->write32(dev, offset, value);
-}
-
-
-/* Translation (routing) bits that need to be ORed to DMA
- * addresses before they are given to a device. */
-extern u32 ssb_dma_translation(struct ssb_device *dev);
-#define SSB_DMA_TRANSLATION_MASK 0xC0000000
-#define SSB_DMA_TRANSLATION_SHIFT 30
-
-extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask);
-
-
-#ifdef CONFIG_SSB_PCIHOST
-/* PCI-host wrapper driver */
-extern int ssb_pcihost_register(struct pci_driver *driver);
-static inline void ssb_pcihost_unregister(struct pci_driver *driver)
-{
- pci_unregister_driver(driver);
-}
-
-static inline
-void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state)
-{
- if (sdev->bus->bustype == SSB_BUSTYPE_PCI)
- pci_set_power_state(sdev->bus->host_pci, state);
-}
-#else
-static inline void ssb_pcihost_unregister(struct pci_driver *driver)
-{
-}
-
-static inline
-void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state)
-{
-}
-#endif /* CONFIG_SSB_PCIHOST */
-
-
-/* If a driver is shutdown or suspended, call this to signal
- * that the bus may be completely powered down. SSB will decide,
- * if it's really time to power down the bus, based on if there
- * are other devices that want to run. */
-extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
-/* Before initializing and enabling a device, call this to power-up the bus.
- * If you want to allow use of dynamic-power-control, pass the flag.
- * Otherwise static always-on powercontrol will be used. */
-extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
-
-
-/* Various helper functions */
-extern u32 ssb_admatch_base(u32 adm);
-extern u32 ssb_admatch_size(u32 adm);
-
-
-#endif /* LINUX_SSB_H_ */
diff --git a/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_chipcommon.h b/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_chipcommon.h
deleted file mode 100644
index 4cb9954946..0000000000
--- a/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_chipcommon.h
+++ /dev/null
@@ -1,396 +0,0 @@
-#ifndef LINUX_SSB_CHIPCO_H_
-#define LINUX_SSB_CHIPCO_H_
-
-/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions
- *
- * The chipcommon core provides chip identification, SB control,
- * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
- * gpio interface, extbus, and support for serial and parallel flashes.
- *
- * Copyright 2005, Broadcom Corporation
- * Copyright 2006, Michael Buesch <mb@bu3sch.de>
- *
- * Licensed under the GPL version 2. See COPYING for details.
- */
-
-/** ChipCommon core registers. **/
-
-#define SSB_CHIPCO_CHIPID 0x0000
-#define SSB_CHIPCO_IDMASK 0x0000FFFF
-#define SSB_CHIPCO_REVMASK 0x000F0000
-#define SSB_CHIPCO_REVSHIFT 16
-#define SSB_CHIPCO_PACKMASK 0x00F00000
-#define SSB_CHIPCO_PACKSHIFT 20
-#define SSB_CHIPCO_NRCORESMASK 0x0F000000
-#define SSB_CHIPCO_NRCORESSHIFT 24
-#define SSB_CHIPCO_CAP 0x0004 /* Capabilities */
-#define SSB_CHIPCO_CAP_NRUART 0x00000003 /* # of UARTs */
-#define SSB_CHIPCO_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
-#define SSB_CHIPCO_CAP_UARTCLK 0x00000018 /* UART clock select */
-#define SSB_CHIPCO_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
-#define SSB_CHIPCO_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
-#define SSB_CHIPCO_CAP_EXTBUS 0x000000C0 /* External buses present */
-#define SSB_CHIPCO_CAP_FLASHT 0x00000700 /* Flash Type */
-#define SSB_CHIPCO_FLASHT_NONE 0x00000000 /* No flash */
-#define SSB_CHIPCO_FLASHT_STSER 0x00000100 /* ST serial flash */
-#define SSB_CHIPCO_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
-#define SSB_CHIPCO_FLASHT_PARA 0x00000700 /* Parallel flash */
-#define SSB_CHIPCO_CAP_PLLT 0x00038000 /* PLL Type */
-#define SSB_PLLTYPE_NONE 0x00000000
-#define SSB_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
-#define SSB_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
-#define SSB_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
-#define SSB_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
-#define SSB_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
-#define SSB_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
-#define SSB_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
-#define SSB_CHIPCO_CAP_PCTL 0x00040000 /* Power Control */
-#define SSB_CHIPCO_CAP_OTPS 0x00380000 /* OTP size */
-#define SSB_CHIPCO_CAP_OTPS_SHIFT 19
-#define SSB_CHIPCO_CAP_OTPS_BASE 5
-#define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
-#define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */
-#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
-#define SSB_CHIPCO_CORECTL 0x0008
-#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
-#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
-#define SSB_CHIPCO_BIST 0x000C
-#define SSB_CHIPCO_OTPS 0x0010 /* OTP status */
-#define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000
-#define SSB_CHIPCO_OTPS_PROTECT 0x00000007
-#define SSB_CHIPCO_OTPS_HW_PROTECT 0x00000001
-#define SSB_CHIPCO_OTPS_SW_PROTECT 0x00000002
-#define SSB_CHIPCO_OTPS_CID_PROTECT 0x00000004
-#define SSB_CHIPCO_OTPC 0x0014 /* OTP control */
-#define SSB_CHIPCO_OTPC_RECWAIT 0xFF000000
-#define SSB_CHIPCO_OTPC_PROGWAIT 0x00FFFF00
-#define SSB_CHIPCO_OTPC_PRW_SHIFT 8
-#define SSB_CHIPCO_OTPC_MAXFAIL 0x00000038
-#define SSB_CHIPCO_OTPC_VSEL 0x00000006
-#define SSB_CHIPCO_OTPC_SELVL 0x00000001
-#define SSB_CHIPCO_OTPP 0x0018 /* OTP prog */
-#define SSB_CHIPCO_OTPP_COL 0x000000FF
-#define SSB_CHIPCO_OTPP_ROW 0x0000FF00
-#define SSB_CHIPCO_OTPP_ROW_SHIFT 8
-#define SSB_CHIPCO_OTPP_READERR 0x10000000
-#define SSB_CHIPCO_OTPP_VALUE 0x20000000
-#define SSB_CHIPCO_OTPP_READ 0x40000000
-#define SSB_CHIPCO_OTPP_START 0x80000000
-#define SSB_CHIPCO_OTPP_BUSY 0x80000000
-#define SSB_CHIPCO_IRQSTAT 0x0020
-#define SSB_CHIPCO_IRQMASK 0x0024
-#define SSB_CHIPCO_IRQ_GPIO 0x00000001 /* gpio intr */
-#define SSB_CHIPCO_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
-#define SSB_CHIPCO_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
-#define SSB_CHIPCO_CHIPCTL 0x0028 /* Rev >= 11 only */
-#define SSB_CHIPCO_CHIPSTAT 0x002C /* Rev >= 11 only */
-#define SSB_CHIPCO_JCMD 0x0030 /* Rev >= 10 only */
-#define SSB_CHIPCO_JCMD_START 0x80000000
-#define SSB_CHIPCO_JCMD_BUSY 0x80000000
-#define SSB_CHIPCO_JCMD_PAUSE 0x40000000
-#define SSB_CHIPCO_JCMD0_ACC_MASK 0x0000F000
-#define SSB_CHIPCO_JCMD0_ACC_IRDR 0x00000000
-#define SSB_CHIPCO_JCMD0_ACC_DR 0x00001000
-#define SSB_CHIPCO_JCMD0_ACC_IR 0x00002000
-#define SSB_CHIPCO_JCMD0_ACC_RESET 0x00003000
-#define SSB_CHIPCO_JCMD0_ACC_IRPDR 0x00004000
-#define SSB_CHIPCO_JCMD0_ACC_PDR 0x00005000
-#define SSB_CHIPCO_JCMD0_IRW_MASK 0x00000F00
-#define SSB_CHIPCO_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
-#define SSB_CHIPCO_JCMD_ACC_IRDR 0x00000000
-#define SSB_CHIPCO_JCMD_ACC_DR 0x00010000
-#define SSB_CHIPCO_JCMD_ACC_IR 0x00020000
-#define SSB_CHIPCO_JCMD_ACC_RESET 0x00030000
-#define SSB_CHIPCO_JCMD_ACC_IRPDR 0x00040000
-#define SSB_CHIPCO_JCMD_ACC_PDR 0x00050000
-#define SSB_CHIPCO_JCMD_IRW_MASK 0x00001F00
-#define SSB_CHIPCO_JCMD_IRW_SHIFT 8
-#define SSB_CHIPCO_JCMD_DRW_MASK 0x0000003F
-#define SSB_CHIPCO_JIR 0x0034 /* Rev >= 10 only */
-#define SSB_CHIPCO_JDR 0x0038 /* Rev >= 10 only */
-#define SSB_CHIPCO_JCTL 0x003C /* Rev >= 10 only */
-#define SSB_CHIPCO_JCTL_FORCE_CLK 4 /* Force clock */
-#define SSB_CHIPCO_JCTL_EXT_EN 2 /* Enable external targets */
-#define SSB_CHIPCO_JCTL_EN 1 /* Enable Jtag master */
-#define SSB_CHIPCO_FLASHCTL 0x0040
-#define SSB_CHIPCO_FLASHCTL_START 0x80000000
-#define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START
-#define SSB_CHIPCO_FLASHADDR 0x0044
-#define SSB_CHIPCO_FLASHDATA 0x0048
-#define SSB_CHIPCO_BCAST_ADDR 0x0050
-#define SSB_CHIPCO_BCAST_DATA 0x0054
-#define SSB_CHIPCO_GPIOIN 0x0060
-#define SSB_CHIPCO_GPIOOUT 0x0064
-#define SSB_CHIPCO_GPIOOUTEN 0x0068
-#define SSB_CHIPCO_GPIOCTL 0x006C
-#define SSB_CHIPCO_GPIOPOL 0x0070
-#define SSB_CHIPCO_GPIOIRQ 0x0074
-#define SSB_CHIPCO_WATCHDOG 0x0080
-#define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
-#define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
-#define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
-#define SSB_CHIPCO_CLOCK_N 0x0090
-#define SSB_CHIPCO_CLOCK_SB 0x0094
-#define SSB_CHIPCO_CLOCK_PCI 0x0098
-#define SSB_CHIPCO_CLOCK_M2 0x009C
-#define SSB_CHIPCO_CLOCK_MIPS 0x00A0
-#define SSB_CHIPCO_CLKDIV 0x00A4 /* Rev >= 3 only */
-#define SSB_CHIPCO_CLKDIV_SFLASH 0x0F000000
-#define SSB_CHIPCO_CLKDIV_SFLASH_SHIFT 24
-#define SSB_CHIPCO_CLKDIV_OTP 0x000F0000
-#define SSB_CHIPCO_CLKDIV_OTP_SHIFT 16
-#define SSB_CHIPCO_CLKDIV_JTAG 0x00000F00
-#define SSB_CHIPCO_CLKDIV_JTAG_SHIFT 8
-#define SSB_CHIPCO_CLKDIV_UART 0x000000FF
-#define SSB_CHIPCO_PLLONDELAY 0x00B0 /* Rev >= 4 only */
-#define SSB_CHIPCO_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
-#define SSB_CHIPCO_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
-#define SSB_CHIPCO_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
-#define SSB_CHIPCO_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
-#define SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
-#define SSB_CHIPCO_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
-#define SSB_CHIPCO_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
-#define SSB_CHIPCO_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
-#define SSB_CHIPCO_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
-#define SSB_CHIPCO_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
-#define SSB_CHIPCO_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
-#define SSB_CHIPCO_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
-#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
-#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT 16
-#define SSB_CHIPCO_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
-#define SSB_CHIPCO_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
-#define SSB_CHIPCO_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
-#define SSB_CHIPCO_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
-#define SSB_CHIPCO_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
-#define SSB_CHIPCO_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
-#define SSB_CHIPCO_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
-#define SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT 16
-#define SSB_CHIPCO_CLKSTSTR 0x00C4 /* Rev >= 3 only */
-#define SSB_CHIPCO_PCMCIA_CFG 0x0100
-#define SSB_CHIPCO_PCMCIA_MEMWAIT 0x0104
-#define SSB_CHIPCO_PCMCIA_ATTRWAIT 0x0108
-#define SSB_CHIPCO_PCMCIA_IOWAIT 0x010C
-#define SSB_CHIPCO_IDE_CFG 0x0110
-#define SSB_CHIPCO_IDE_MEMWAIT 0x0114
-#define SSB_CHIPCO_IDE_ATTRWAIT 0x0118
-#define SSB_CHIPCO_IDE_IOWAIT 0x011C
-#define SSB_CHIPCO_PROG_CFG 0x0120
-#define SSB_CHIPCO_PROG_WAITCNT 0x0124
-#define SSB_CHIPCO_FLASH_CFG 0x0128
-#define SSB_CHIPCO_FLASH_WAITCNT 0x012C
-#define SSB_CHIPCO_UART0_DATA 0x0300
-#define SSB_CHIPCO_UART0_IMR 0x0304
-#define SSB_CHIPCO_UART0_FCR 0x0308
-#define SSB_CHIPCO_UART0_LCR 0x030C
-#define SSB_CHIPCO_UART0_MCR 0x0310
-#define SSB_CHIPCO_UART0_LSR 0x0314
-#define SSB_CHIPCO_UART0_MSR 0x0318
-#define SSB_CHIPCO_UART0_SCRATCH 0x031C
-#define SSB_CHIPCO_UART1_DATA 0x0400
-#define SSB_CHIPCO_UART1_IMR 0x0404
-#define SSB_CHIPCO_UART1_FCR 0x0408
-#define SSB_CHIPCO_UART1_LCR 0x040C
-#define SSB_CHIPCO_UART1_MCR 0x0410
-#define SSB_CHIPCO_UART1_LSR 0x0414
-#define SSB_CHIPCO_UART1_MSR 0x0418
-#define SSB_CHIPCO_UART1_SCRATCH 0x041C
-
-
-
-/** Clockcontrol masks and values **/
-
-/* SSB_CHIPCO_CLOCK_N */
-#define SSB_CHIPCO_CLK_N1 0x0000003F /* n1 control */
-#define SSB_CHIPCO_CLK_N2 0x00003F00 /* n2 control */
-#define SSB_CHIPCO_CLK_N2_SHIFT 8
-#define SSB_CHIPCO_CLK_PLLC 0x000F0000 /* pll control */
-#define SSB_CHIPCO_CLK_PLLC_SHIFT 16
-
-/* SSB_CHIPCO_CLOCK_SB/PCI/UART */
-#define SSB_CHIPCO_CLK_M1 0x0000003F /* m1 control */
-#define SSB_CHIPCO_CLK_M2 0x00003F00 /* m2 control */
-#define SSB_CHIPCO_CLK_M2_SHIFT 8
-#define SSB_CHIPCO_CLK_M3 0x003F0000 /* m3 control */
-#define SSB_CHIPCO_CLK_M3_SHIFT 16
-#define SSB_CHIPCO_CLK_MC 0x1F000000 /* mux control */
-#define SSB_CHIPCO_CLK_MC_SHIFT 24
-
-/* N3M Clock control magic field values */
-#define SSB_CHIPCO_CLK_F6_2 0x02 /* A factor of 2 in */
-#define SSB_CHIPCO_CLK_F6_3 0x03 /* 6-bit fields like */
-#define SSB_CHIPCO_CLK_F6_4 0x05 /* N1, M1 or M3 */
-#define SSB_CHIPCO_CLK_F6_5 0x09
-#define SSB_CHIPCO_CLK_F6_6 0x11
-#define SSB_CHIPCO_CLK_F6_7 0x21
-
-#define SSB_CHIPCO_CLK_F5_BIAS 5 /* 5-bit fields get this added */
-
-#define SSB_CHIPCO_CLK_MC_BYPASS 0x08
-#define SSB_CHIPCO_CLK_MC_M1 0x04
-#define SSB_CHIPCO_CLK_MC_M1M2 0x02
-#define SSB_CHIPCO_CLK_MC_M1M2M3 0x01
-#define SSB_CHIPCO_CLK_MC_M1M3 0x11
-
-/* Type 2 Clock control magic field values */
-#define SSB_CHIPCO_CLK_T2_BIAS 2 /* n1, n2, m1 & m3 bias */
-#define SSB_CHIPCO_CLK_T2M2_BIAS 3 /* m2 bias */
-
-#define SSB_CHIPCO_CLK_T2MC_M1BYP 1
-#define SSB_CHIPCO_CLK_T2MC_M2BYP 2
-#define SSB_CHIPCO_CLK_T2MC_M3BYP 4
-
-/* Type 6 Clock control magic field values */
-#define SSB_CHIPCO_CLK_T6_MMASK 1 /* bits of interest in m */
-#define SSB_CHIPCO_CLK_T6_M0 120000000 /* sb clock for m = 0 */
-#define SSB_CHIPCO_CLK_T6_M1 100000000 /* sb clock for m = 1 */
-#define SSB_CHIPCO_CLK_SB2MIPS_T6(sb) (2 * (sb))
-
-/* Common clock base */
-#define SSB_CHIPCO_CLK_BASE1 24000000 /* Half the clock freq */
-#define SSB_CHIPCO_CLK_BASE2 12500000 /* Alternate crystal on some PLL's */
-
-/* Clock control values for 200Mhz in 5350 */
-#define SSB_CHIPCO_CLK_5350_N 0x0311
-#define SSB_CHIPCO_CLK_5350_M 0x04020009
-
-
-/** Bits in the config registers **/
-
-#define SSB_CHIPCO_CFG_EN 0x0001 /* Enable */
-#define SSB_CHIPCO_CFG_EXTM 0x000E /* Extif Mode */
-#define SSB_CHIPCO_CFG_EXTM_ASYNC 0x0002 /* Async/Parallel flash */
-#define SSB_CHIPCO_CFG_EXTM_SYNC 0x0004 /* Synchronous */
-#define SSB_CHIPCO_CFG_EXTM_PCMCIA 0x0008 /* PCMCIA */
-#define SSB_CHIPCO_CFG_EXTM_IDE 0x000A /* IDE */
-#define SSB_CHIPCO_CFG_DS16 0x0010 /* Data size, 0=8bit, 1=16bit */
-#define SSB_CHIPCO_CFG_CLKDIV 0x0060 /* Sync: Clock divisor */
-#define SSB_CHIPCO_CFG_CLKEN 0x0080 /* Sync: Clock enable */
-#define SSB_CHIPCO_CFG_BSTRO 0x0100 /* Sync: Size/Bytestrobe */
-
-
-/** Flash-specific control/status values */
-
-/* flashcontrol opcodes for ST flashes */
-#define SSB_CHIPCO_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
-#define SSB_CHIPCO_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
-#define SSB_CHIPCO_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
-#define SSB_CHIPCO_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
-#define SSB_CHIPCO_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
-#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
-#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
-#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
-
-/* Status register bits for ST flashes */
-#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
-#define SSB_CHIPCO_FLASHSTA_ST_WEL 0x02 /* Write Enable Latch */
-#define SSB_CHIPCO_FLASHSTA_ST_BP 0x1C /* Block Protect */
-#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT 2
-#define SSB_CHIPCO_FLASHSTA_ST_SRWD 0x80 /* Status Register Write Disable */
-
-/* flashcontrol opcodes for Atmel flashes */
-#define SSB_CHIPCO_FLASHCTL_AT_READ 0x07E8
-#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ 0x07D2
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ /* FIXME */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ /* FIXME */
-#define SSB_CHIPCO_FLASHCTL_AT_STATUS 0x01D7
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE 0x0384
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE 0x0387
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM 0x0283 /* Erase program */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM 0x0286 /* Erase program */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM 0x0288
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM 0x0289
-#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE 0x0281
-#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE 0x0250
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM 0x0382 /* Write erase program */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM 0x0385 /* Write erase program */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD 0x0253
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD 0x0255
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE 0x0260
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE 0x0261
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
-
-/* Status register bits for Atmel flashes */
-#define SSB_CHIPCO_FLASHSTA_AT_READY 0x80
-#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH 0x40
-#define SSB_CHIPCO_FLASHSTA_AT_ID 0x38
-#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT 3
-
-
-/** OTP **/
-
-/* OTP regions */
-#define SSB_CHIPCO_OTP_HW_REGION SSB_CHIPCO_OTPS_HW_PROTECT
-#define SSB_CHIPCO_OTP_SW_REGION SSB_CHIPCO_OTPS_SW_PROTECT
-#define SSB_CHIPCO_OTP_CID_REGION SSB_CHIPCO_OTPS_CID_PROTECT
-
-/* OTP regions (Byte offsets from otp size) */
-#define SSB_CHIPCO_OTP_SWLIM_OFF (-8)
-#define SSB_CHIPCO_OTP_CIDBASE_OFF 0
-#define SSB_CHIPCO_OTP_CIDLIM_OFF 8
-
-/* Predefined OTP words (Word offset from otp size) */
-#define SSB_CHIPCO_OTP_BOUNDARY_OFF (-4)
-#define SSB_CHIPCO_OTP_HWSIGN_OFF (-3)
-#define SSB_CHIPCO_OTP_SWSIGN_OFF (-2)
-#define SSB_CHIPCO_OTP_CIDSIGN_OFF (-1)
-
-#define SSB_CHIPCO_OTP_CID_OFF 0
-#define SSB_CHIPCO_OTP_PKG_OFF 1
-#define SSB_CHIPCO_OTP_FID_OFF 2
-#define SSB_CHIPCO_OTP_RSV_OFF 3
-#define SSB_CHIPCO_OTP_LIM_OFF 4
-
-#define SSB_CHIPCO_OTP_SIGNATURE 0x578A
-#define SSB_CHIPCO_OTP_MAGIC 0x4E56
-
-
-struct ssb_device;
-struct ssb_serial_port;
-
-struct ssb_chipcommon {
- struct ssb_device *dev;
- u32 capabilities;
- /* Fast Powerup Delay constant */
- u16 fast_pwrup_delay;
-};
-
-extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
-
-#include <linux/pm.h>
-extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state);
-extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
-
-extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
- u32 *plltype, u32 *n, u32 *m);
-extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
- u32 *plltype, u32 *n, u32 *m);
-extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
- unsigned long ns_per_cycle);
-
-enum ssb_clkmode {
- SSB_CLKMODE_SLOW,
- SSB_CLKMODE_FAST,
- SSB_CLKMODE_DYNAMIC,
-};
-
-extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
- enum ssb_clkmode mode);
-
-extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
- u32 ticks);
-
-u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
-
-void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
-
-void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
-
-#ifdef CONFIG_SSB_SERIAL
-extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
- struct ssb_serial_port *ports);
-#endif /* CONFIG_SSB_SERIAL */
-
-#endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_extif.h b/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_extif.h
deleted file mode 100644
index a9164357b5..0000000000
--- a/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_extif.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Hardware-specific External Interface I/O core definitions
- * for the BCM47xx family of SiliconBackplane-based chips.
- *
- * The External Interface core supports a total of three external chip selects
- * supporting external interfaces. One of the external chip selects is
- * used for Flash, one is used for PCMCIA, and the other may be
- * programmed to support either a synchronous interface or an
- * asynchronous interface. The asynchronous interface can be used to
- * support external devices such as UARTs and the BCM2019 Bluetooth
- * baseband processor.
- * The external interface core also contains 2 on-chip 16550 UARTs, clock
- * frequency control, a watchdog interrupt timer, and a GPIO interface.
- *
- * Copyright 2005, Broadcom Corporation
- * Copyright 2006, Michael Buesch
- *
- * Licensed under the GPL version 2. See COPYING for details.
- */
-#ifndef LINUX_SSB_EXTIFCORE_H_
-#define LINUX_SSB_EXTIFCORE_H_
-
-/* external interface address space */
-#define SSB_EXTIF_PCMCIA_MEMBASE(x) (x)
-#define SSB_EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
-#define SSB_EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
-#define SSB_EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
-#define SSB_EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
-
-#define SSB_EXTIF_NR_GPIOOUT 5
-/* GPIO NOTE:
- * The multiple instances of output and output enable registers
- * are present to allow driver software for multiple cores to control
- * gpio outputs without needing to share a single register pair.
- * Use the following helper macro to get a register offset value.
- */
-#define SSB_EXTIF_GPIO_OUT(index) ({ \
- BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
- SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8); \
- })
-#define SSB_EXTIF_GPIO_OUTEN(index) ({ \
- BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
- SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8); \
- })
-
-/** EXTIF core registers **/
-
-#define SSB_EXTIF_CTL 0x0000
-#define SSB_EXTIF_CTL_UARTEN (1 << 0) /* UART enable */
-#define SSB_EXTIF_EXTSTAT 0x0004
-#define SSB_EXTIF_EXTSTAT_EMODE (1 << 0) /* Endian mode (ro) */
-#define SSB_EXTIF_EXTSTAT_EIRQPIN (1 << 1) /* External interrupt pin (ro) */
-#define SSB_EXTIF_EXTSTAT_GPIOIRQPIN (1 << 2) /* GPIO interrupt pin (ro) */
-#define SSB_EXTIF_PCMCIA_CFG 0x0010
-#define SSB_EXTIF_PCMCIA_MEMWAIT 0x0014
-#define SSB_EXTIF_PCMCIA_ATTRWAIT 0x0018
-#define SSB_EXTIF_PCMCIA_IOWAIT 0x001C
-#define SSB_EXTIF_PROG_CFG 0x0020
-#define SSB_EXTIF_PROG_WAITCNT 0x0024
-#define SSB_EXTIF_FLASH_CFG 0x0028
-#define SSB_EXTIF_FLASH_WAITCNT 0x002C
-#define SSB_EXTIF_WATCHDOG 0x0040
-#define SSB_EXTIF_CLOCK_N 0x0044
-#define SSB_EXTIF_CLOCK_SB 0x0048
-#define SSB_EXTIF_CLOCK_PCI 0x004C
-#define SSB_EXTIF_CLOCK_MII 0x0050
-#define SSB_EXTIF_GPIO_IN 0x0060
-#define SSB_EXTIF_GPIO_OUT_BASE 0x0064
-#define SSB_EXTIF_GPIO_OUTEN_BASE 0x0068
-#define SSB_EXTIF_EJTAG_OUTEN 0x0090
-#define SSB_EXTIF_GPIO_INTPOL 0x0094
-#define SSB_EXTIF_GPIO_INTMASK 0x0098
-#define SSB_EXTIF_UART_DATA 0x0300
-#define SSB_EXTIF_UART_TIMER 0x0310
-#define SSB_EXTIF_UART_FCR 0x0320
-#define SSB_EXTIF_UART_LCR 0x0330
-#define SSB_EXTIF_UART_MCR 0x0340
-#define SSB_EXTIF_UART_LSR 0x0350
-#define SSB_EXTIF_UART_MSR 0x0360
-#define SSB_EXTIF_UART_SCRATCH 0x0370
-
-
-
-
-/* pcmcia/prog/flash_config */
-#define SSB_EXTCFG_EN (1 << 0) /* enable */
-#define SSB_EXTCFG_MODE 0xE /* mode */
-#define SSB_EXTCFG_MODE_SHIFT 1
-#define SSB_EXTCFG_MODE_FLASH 0x0 /* flash/asynchronous mode */
-#define SSB_EXTCFG_MODE_SYNC 0x2 /* synchronous mode */
-#define SSB_EXTCFG_MODE_PCMCIA 0x4 /* pcmcia mode */
-#define SSB_EXTCFG_DS16 (1 << 4) /* destsize: 0=8bit, 1=16bit */
-#define SSB_EXTCFG_BSWAP (1 << 5) /* byteswap */
-#define SSB_EXTCFG_CLKDIV 0xC0 /* clock divider */
-#define SSB_EXTCFG_CLKDIV_SHIFT 6
-#define SSB_EXTCFG_CLKDIV_2 0x0 /* backplane/2 */
-#define SSB_EXTCFG_CLKDIV_3 0x40 /* backplane/3 */
-#define SSB_EXTCFG_CLKDIV_4 0x80 /* backplane/4 */
-#define SSB_EXTCFG_CLKEN (1 << 8) /* clock enable */
-#define SSB_EXTCFG_STROBE (1 << 9) /* size/bytestrobe (synch only) */
-
-/* pcmcia_memwait */
-#define SSB_PCMCIA_MEMW_0 0x0000003F /* waitcount0 */
-#define SSB_PCMCIA_MEMW_1 0x00001F00 /* waitcount1 */
-#define SSB_PCMCIA_MEMW_1_SHIFT 8
-#define SSB_PCMCIA_MEMW_2 0x001F0000 /* waitcount2 */
-#define SSB_PCMCIA_MEMW_2_SHIFT 16
-#define SSB_PCMCIA_MEMW_3 0x1F000000 /* waitcount3 */
-#define SSB_PCMCIA_MEMW_3_SHIFT 24
-
-/* pcmcia_attrwait */
-#define SSB_PCMCIA_ATTW_0 0x0000003F /* waitcount0 */
-#define SSB_PCMCIA_ATTW_1 0x00001F00 /* waitcount1 */
-#define SSB_PCMCIA_ATTW_1_SHIFT 8
-#define SSB_PCMCIA_ATTW_2 0x001F0000 /* waitcount2 */
-#define SSB_PCMCIA_ATTW_2_SHIFT 16
-#define SSB_PCMCIA_ATTW_3 0x1F000000 /* waitcount3 */
-#define SSB_PCMCIA_ATTW_3_SHIFT 24
-
-/* pcmcia_iowait */
-#define SSB_PCMCIA_IOW_0 0x0000003F /* waitcount0 */
-#define SSB_PCMCIA_IOW_1 0x00001F00 /* waitcount1 */
-#define SSB_PCMCIA_IOW_1_SHIFT 8
-#define SSB_PCMCIA_IOW_2 0x001F0000 /* waitcount2 */
-#define SSB_PCMCIA_IOW_2_SHIFT 16
-#define SSB_PCMCIA_IOW_3 0x1F000000 /* waitcount3 */
-#define SSB_PCMCIA_IOW_3_SHIFT 24
-
-/* prog_waitcount */
-#define SSB_PROG_WCNT_0 0x0000001F /* waitcount0 */
-#define SSB_PROG_WCNT_1 0x00001F00 /* waitcount1 */
-#define SSB_PROG_WCNT_1_SHIFT 8
-#define SSB_PROG_WCNT_2 0x001F0000 /* waitcount2 */
-#define SSB_PROG_WCNT_2_SHIFT 16
-#define SSB_PROG_WCNT_3 0x1F000000 /* waitcount3 */
-#define SSB_PROG_WCNT_3_SHIFT 24
-
-#define SSB_PROG_W0 0x0000000C
-#define SSB_PROG_W1 0x00000A00
-#define SSB_PROG_W2 0x00020000
-#define SSB_PROG_W3 0x01000000
-
-/* flash_waitcount */
-#define SSB_FLASH_WCNT_0 0x0000001F /* waitcount0 */
-#define SSB_FLASH_WCNT_1 0x00001F00 /* waitcount1 */
-#define SSB_FLASH_WCNT_1_SHIFT 8
-#define SSB_FLASH_WCNT_2 0x001F0000 /* waitcount2 */
-#define SSB_FLASH_WCNT_2_SHIFT 16
-#define SSB_FLASH_WCNT_3 0x1F000000 /* waitcount3 */
-#define SSB_FLASH_WCNT_3_SHIFT 24
-
-/* watchdog */
-#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
-
-
-
-#ifdef CONFIG_SSB_DRIVER_EXTIF
-
-struct ssb_extif {
- struct ssb_device *dev;
-};
-
-static inline bool ssb_extif_available(struct ssb_extif *extif)
-{
- return (extif->dev != NULL);
-}
-
-extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
- u32 *plltype, u32 *n, u32 *m);
-
-extern void ssb_extif_timing_init(struct ssb_extif *extif,
- unsigned long ns);
-
-u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
-
-void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
-
-void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
-
-#ifdef CONFIG_SSB_SERIAL
-extern int ssb_extif_serial_init(struct ssb_extif *extif,
- struct ssb_serial_port *ports);
-#endif /* CONFIG_SSB_SERIAL */
-
-
-#else /* CONFIG_SSB_DRIVER_EXTIF */
-/* extif disabled */
-
-struct ssb_extif {
-};
-
-static inline bool ssb_extif_available(struct ssb_extif *extif)
-{
- return 0;
-}
-
-static inline
-void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
- u32 *plltype, u32 *n, u32 *m)
-{
-}
-
-#endif /* CONFIG_SSB_DRIVER_EXTIF */
-#endif /* LINUX_SSB_EXTIFCORE_H_ */
diff --git a/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_mips.h b/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_mips.h
deleted file mode 100644
index 5f44e9740c..0000000000
--- a/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_mips.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef LINUX_SSB_MIPSCORE_H_
-#define LINUX_SSB_MIPSCORE_H_
-
-#ifdef CONFIG_SSB_DRIVER_MIPS
-
-struct ssb_device;
-
-struct ssb_serial_port {
- void *regs;
- unsigned long clockspeed;
- unsigned int irq;
- unsigned int baud_base;
- unsigned int reg_shift;
-};
-
-
-struct ssb_mipscore {
- struct ssb_device *dev;
-
- int nr_serial_ports;
- struct ssb_serial_port serial_ports[4];
-
- u8 flash_buswidth;
- u32 flash_window;
- u32 flash_window_size;
-};
-
-extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
-extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore);
-
-extern unsigned int ssb_mips_irq(struct ssb_device *dev);
-
-
-#else /* CONFIG_SSB_DRIVER_MIPS */
-
-struct ssb_mipscore {
-};
-
-static inline
-void ssb_mipscore_init(struct ssb_mipscore *mcore)
-{
-}
-
-#endif /* CONFIG_SSB_DRIVER_MIPS */
-
-#endif /* LINUX_SSB_MIPSCORE_H_ */
diff --git a/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_pci.h b/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_pci.h
deleted file mode 100644
index 9cfffb7b1a..0000000000
--- a/target/linux/generic-2.6/files/include/linux/ssb/ssb_driver_pci.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef LINUX_SSB_PCICORE_H_
-#define LINUX_SSB_PCICORE_H_
-
-#ifdef CONFIG_SSB_DRIVER_PCICORE
-
-/* PCI core registers. */
-#define SSB_PCICORE_CTL 0x0000 /* PCI Control */
-#define SSB_PCICORE_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
-#define SSB_PCICORE_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
-#define SSB_PCICORE_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
-#define SSB_PCICORE_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
-#define SSB_PCICORE_ARBCTL 0x0010 /* PCI Arbiter Control */
-#define SSB_PCICORE_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
-#define SSB_PCICORE_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
-#define SSB_PCICORE_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
-#define SSB_PCICORE_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
-#define SSB_PCICORE_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
-#define SSB_PCICORE_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
-#define SSB_PCICORE_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
-#define SSB_PCICORE_ISTAT 0x0020 /* Interrupt status */
-#define SSB_PCICORE_ISTAT_INTA 0x00000001 /* PCI INTA# */
-#define SSB_PCICORE_ISTAT_INTB 0x00000002 /* PCI INTB# */
-#define SSB_PCICORE_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
-#define SSB_PCICORE_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
-#define SSB_PCICORE_ISTAT_PME 0x00000010 /* PCI PME# */
-#define SSB_PCICORE_IMASK 0x0024 /* Interrupt mask */
-#define SSB_PCICORE_IMASK_INTA 0x00000001 /* PCI INTA# */
-#define SSB_PCICORE_IMASK_INTB 0x00000002 /* PCI INTB# */
-#define SSB_PCICORE_IMASK_SERR 0x00000004 /* PCI SERR# */
-#define SSB_PCICORE_IMASK_PERR 0x00000008 /* PCI PERR# */
-#define SSB_PCICORE_IMASK_PME 0x00000010 /* PCI PME# */
-#define SSB_PCICORE_MBOX 0x0028 /* Backplane to PCI Mailbox */
-#define SSB_PCICORE_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
-#define SSB_PCICORE_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
-#define SSB_PCICORE_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
-#define SSB_PCICORE_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
-#define SSB_PCICORE_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
-#define SSB_PCICORE_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
-#define SSB_PCICORE_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
-#define SSB_PCICORE_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
-#define SSB_PCICORE_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
-#define SSB_PCICORE_BCAST_ADDR_MASK 0x000000FF
-#define SSB_PCICORE_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
-#define SSB_PCICORE_GPIO_IN 0x0060 /* rev >= 2 only */
-#define SSB_PCICORE_GPIO_OUT 0x0064 /* rev >= 2 only */
-#define SSB_PCICORE_GPIO_ENABLE 0x0068 /* rev >= 2 only */
-#define SSB_PCICORE_GPIO_CTL 0x006C /* rev >= 2 only */
-#define SSB_PCICORE_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
-#define SSB_PCICORE_SBTOPCI0_MASK 0xFC000000
-#define SSB_PCICORE_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
-#define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000
-#define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
-#define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000
-
-/* SBtoPCIx */
-#define SSB_PCICORE_SBTOPCI_MEM 0x00000000
-#define SSB_PCICORE_SBTOPCI_IO 0x00000001
-#define SSB_PCICORE_SBTOPCI_CFG0 0x00000002
-#define SSB_PCICORE_SBTOPCI_CFG1 0x00000003
-#define SSB_PCICORE_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
-#define SSB_PCICORE_SBTOPCI_BURST 0x00000008 /* Burst enable */
-#define SSB_PCICORE_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
-#define SSB_PCICORE_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
-#define SSB_PCICORE_SBTOPCI_RC_READ 0x00000000 /* Memory read */
-#define SSB_PCICORE_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
-#define SSB_PCICORE_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
-
-
-/* PCIcore specific boardflags */
-#define SSB_PCICORE_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
-
-
-struct ssb_pcicore {
- struct ssb_device *dev;
- u8 setup_done:1;
- u8 hostmode:1;
- u8 cardbusmode:1;
-};
-
-extern void ssb_pcicore_init(struct ssb_pcicore *pc);
-
-/* Enable IRQ routing for a specific device */
-extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
- struct ssb_device *dev);
-
-
-#else /* CONFIG_SSB_DRIVER_PCICORE */
-
-
-struct ssb_pcicore {
-};
-
-static inline
-void ssb_pcicore_init(struct ssb_pcicore *pc)
-{
-}
-
-static inline
-int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
- struct ssb_device *dev)
-{
- return 0;
-}
-
-#endif /* CONFIG_SSB_DRIVER_PCICORE */
-#endif /* LINUX_SSB_PCICORE_H_ */
diff --git a/target/linux/generic-2.6/files/include/linux/ssb/ssb_regs.h b/target/linux/generic-2.6/files/include/linux/ssb/ssb_regs.h
deleted file mode 100644
index ebad0bac98..0000000000
--- a/target/linux/generic-2.6/files/include/linux/ssb/ssb_regs.h
+++ /dev/null
@@ -1,357 +0,0 @@
-#ifndef LINUX_SSB_REGS_H_
-#define LINUX_SSB_REGS_H_
-
-
-/* SiliconBackplane Address Map.
- * All regions may not exist on all chips.
- */
-#define SSB_SDRAM_BASE 0x00000000U /* Physical SDRAM */
-#define SSB_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */
-#define SSB_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */
-#define SSB_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */
-#define SSB_ENUM_BASE 0x18000000U /* Enumeration space base */
-#define SSB_ENUM_LIMIT 0x18010000U /* Enumeration space limit */
-
-#define SSB_FLASH2 0x1c000000U /* Flash Region 2 (region 1 shadowed here) */
-#define SSB_FLASH2_SZ 0x02000000U /* Size of Flash Region 2 */
-
-#define SSB_EXTIF_BASE 0x1f000000U /* External Interface region base address */
-#define SSB_FLASH1 0x1fc00000U /* Flash Region 1 */
-#define SSB_FLASH1_SZ 0x00400000U /* Size of Flash Region 1 */
-
-#define SSB_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */
-#define SSB_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */
-#define SSB_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
-#define SSB_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
-#define SSB_EUART (SSB_EXTIF_BASE + 0x00800000)
-#define SSB_LED (SSB_EXTIF_BASE + 0x00900000)
-
-
-/* Enumeration space constants */
-#define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */
-#define SSB_MAX_NR_CORES ((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE)
-
-
-/* mips address */
-#define SSB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
-
-
-/* SSB PCI config space registers. */
-#define SSB_PMCSR 0x44
-#define SSB_PE 0x100
-#define SSB_BAR0_WIN 0x80 /* Backplane address space 0 */
-#define SSB_BAR1_WIN 0x84 /* Backplane address space 1 */
-#define SSB_SPROMCTL 0x88 /* SPROM control */
-#define SSB_SPROMCTL_WE 0x10 /* SPROM write enable */
-#define SSB_BAR1_CONTROL 0x8c /* Address space 1 burst control */
-#define SSB_PCI_IRQS 0x90 /* PCI interrupts */
-#define SSB_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
-#define SSB_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
-#define SSB_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
-#define SSB_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
-#define SSB_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
-#define SSB_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
-#define SSB_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
-#define SSB_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
-#define SSB_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
-
-
-#define SSB_BAR0_MAX_RETRIES 50
-
-/* Silicon backplane configuration register definitions */
-#define SSB_IPSFLAG 0x0F08
-#define SSB_IPSFLAG_IRQ1 0x0000003F /* which sbflags get routed to mips interrupt 1 */
-#define SSB_IPSFLAG_IRQ1_SHIFT 0
-#define SSB_IPSFLAG_IRQ2 0x00003F00 /* which sbflags get routed to mips interrupt 2 */
-#define SSB_IPSFLAG_IRQ2_SHIFT 8
-#define SSB_IPSFLAG_IRQ3 0x003F0000 /* which sbflags get routed to mips interrupt 3 */
-#define SSB_IPSFLAG_IRQ3_SHIFT 16
-#define SSB_IPSFLAG_IRQ4 0x3F000000 /* which sbflags get routed to mips interrupt 4 */
-#define SSB_IPSFLAG_IRQ4_SHIFT 24
-#define SSB_TPSFLAG 0x0F18
-#define SSB_TPSFLAG_BPFLAG 0x0000003F /* Backplane flag # */
-#define SSB_TPSFLAG_ALWAYSIRQ 0x00000040 /* IRQ is always sent on the Backplane */
-#define SSB_TMERRLOGA 0x0F48
-#define SSB_TMERRLOG 0x0F50
-#define SSB_ADMATCH3 0x0F60
-#define SSB_ADMATCH2 0x0F68
-#define SSB_ADMATCH1 0x0F70
-#define SSB_IMSTATE 0x0F90 /* SB Initiator Agent State */
-#define SSB_IMSTATE_PC 0x0000000f /* Pipe Count */
-#define SSB_IMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */
-#define SSB_IMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */
-#define SSB_IMSTATE_AP_TS 0x00000010 /* Use timeslices only */
-#define SSB_IMSTATE_AP_TK 0x00000020 /* Use token only */
-#define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
-#define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
-#define SSB_IMSTATE_TO 0x00040000 /* Timeout */
-#define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
-#define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
-#define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
-#define SSB_INTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
-#define SSB_INTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
-#define SSB_INTVEC_USB 0x00000010 /* Enable interrupts for usb */
-#define SSB_INTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
-#define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
-#define SSB_TMSLOW 0x0F98 /* SB Target State Low */
-#define SSB_TMSLOW_RESET 0x00000001 /* Reset */
-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
-#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
-#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
-#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
-#define SSB_TMSLOW_PE 0x40000000 /* Power Management Enable */
-#define SSB_TMSLOW_BE 0x80000000 /* BIST Enable */
-#define SSB_TMSHIGH 0x0F9C /* SB Target State High */
-#define SSB_TMSHIGH_SERR 0x00000001 /* S-error */
-#define SSB_TMSHIGH_INT 0x00000002 /* Interrupt */
-#define SSB_TMSHIGH_BUSY 0x00000004 /* Busy */
-#define SSB_TMSHIGH_TO 0x00000020 /* Timeout. Backplane rev >= 2.3 only */
-#define SSB_TMSHIGH_COREFL 0x1FFF0000 /* Core specific flags */
-#define SSB_TMSHIGH_COREFL_SHIFT 16
-#define SSB_TMSHIGH_DMA64 0x10000000 /* 64bit DMA supported */
-#define SSB_TMSHIGH_GCR 0x20000000 /* Gated Clock Request */
-#define SSB_TMSHIGH_BISTF 0x40000000 /* BIST Failed */
-#define SSB_TMSHIGH_BISTD 0x80000000 /* BIST Done */
-#define SSB_BWA0 0x0FA0
-#define SSB_IMCFGLO 0x0FA8
-#define SSB_IMCFGLO_SERTO 0x00000007 /* Service timeout */
-#define SSB_IMCFGLO_REQTO 0x00000070 /* Request timeout */
-#define SSB_IMCFGLO_REQTO_SHIFT 4
-#define SSB_IMCFGLO_CONNID 0x00FF0000 /* Connection ID */
-#define SSB_IMCFGLO_CONNID_SHIFT 16
-#define SSB_IMCFGHI 0x0FAC
-#define SSB_ADMATCH0 0x0FB0
-#define SSB_TMCFGLO 0x0FB8
-#define SSB_TMCFGHI 0x0FBC
-#define SSB_BCONFIG 0x0FC0
-#define SSB_BSTATE 0x0FC8
-#define SSB_ACTCFG 0x0FD8
-#define SSB_FLAGST 0x0FE8
-#define SSB_IDLOW 0x0FF8
-#define SSB_IDLOW_CFGSP 0x00000003 /* Config Space */
-#define SSB_IDLOW_ADDRNGE 0x00000038 /* Address Ranges supported */
-#define SSB_IDLOW_ADDRNGE_SHIFT 3
-#define SSB_IDLOW_SYNC 0x00000040
-#define SSB_IDLOW_INITIATOR 0x00000080
-#define SSB_IDLOW_MIBL 0x00000F00 /* Minimum Backplane latency */
-#define SSB_IDLOW_MIBL_SHIFT 8
-#define SSB_IDLOW_MABL 0x0000F000 /* Maximum Backplane latency */
-#define SSB_IDLOW_MABL_SHIFT 12
-#define SSB_IDLOW_TIF 0x00010000 /* This Initiator is first */
-#define SSB_IDLOW_CCW 0x000C0000 /* Cycle counter width */
-#define SSB_IDLOW_CCW_SHIFT 18
-#define SSB_IDLOW_TPT 0x00F00000 /* Target ports */
-#define SSB_IDLOW_TPT_SHIFT 20
-#define SSB_IDLOW_INITP 0x0F000000 /* Initiator ports */
-#define SSB_IDLOW_INITP_SHIFT 24
-#define SSB_IDLOW_SSBREV 0xF0000000 /* Sonics Backplane Revision code */
-#define SSB_IDLOW_SSBREV_22 0x00000000 /* <= 2.2 */
-#define SSB_IDLOW_SSBREV_23 0x10000000 /* 2.3 */
-#define SSB_IDLOW_SSBREV_24 0x40000000 /* ?? Found in BCM4328 */
-#define SSB_IDLOW_SSBREV_25 0x50000000 /* ?? Not Found yet */
-#define SSB_IDLOW_SSBREV_26 0x60000000 /* ?? Found in some BCM4311/2 */
-#define SSB_IDLOW_SSBREV_27 0x70000000 /* ?? Found in some BCM4311/2 */
-#define SSB_IDHIGH 0x0FFC /* SB Identification High */
-#define SSB_IDHIGH_RCLO 0x0000000F /* Revision Code (low part) */
-#define SSB_IDHIGH_CC 0x00008FF0 /* Core Code */
-#define SSB_IDHIGH_CC_SHIFT 4
-#define SSB_IDHIGH_RCHI 0x00007000 /* Revision Code (high part) */
-#define SSB_IDHIGH_RCHI_SHIFT 8 /* yes, shift 8 is right */
-#define SSB_IDHIGH_VC 0xFFFF0000 /* Vendor Code */
-#define SSB_IDHIGH_VC_SHIFT 16
-
-/* SPROM shadow area. If not otherwise noted, fields are
- * two bytes wide. Note that the SPROM can _only_ be read
- * in two-byte quantinies.
- */
-#define SSB_SPROMSIZE_WORDS 64
-#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
-#define SSB_SPROMSIZE_WORDS_R123 64
-#define SSB_SPROMSIZE_WORDS_R4 220
-#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
-#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
-#define SSB_SPROM_BASE 0x1000
-#define SSB_SPROM_REVISION 0x107E
-#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
-#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
-#define SSB_SPROM_REVISION_CRC_SHIFT 8
-
-/* SPROM Revision 1 */
-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
-#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
-#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
-#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
-#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
-#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM1_BINF 0x105C /* Board info */
-#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
-#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
-#define SSB_SPROM1_BINF_CCODE_SHIFT 8
-#define SSB_SPROM1_BINF_ANTBG 0x3000 /* Available B-PHY and G-PHY antennas */
-#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
-#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
-#define SSB_SPROM1_BINF_ANTA_SHIFT 14
-#define SSB_SPROM1_PA0B0 0x105E
-#define SSB_SPROM1_PA0B1 0x1060
-#define SSB_SPROM1_PA0B2 0x1062
-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
-#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
-#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
-#define SSB_SPROM1_GPIOA_P1_SHIFT 8
-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
-#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
-#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
-#define SSB_SPROM1_GPIOB_P3_SHIFT 8
-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
-#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
-#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
-#define SSB_SPROM1_MAXPWR_A_SHIFT 8
-#define SSB_SPROM1_PA1B0 0x106A
-#define SSB_SPROM1_PA1B1 0x106C
-#define SSB_SPROM1_PA1B2 0x106E
-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
-#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
-#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
-#define SSB_SPROM1_ITSSI_A_SHIFT 8
-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
-#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
-#define SSB_SPROM1_AGAIN_BG_SHIFT 0
-#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
-#define SSB_SPROM1_AGAIN_A_SHIFT 8
-
-/* SPROM Revision 2 (inherits from rev 1) */
-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
-#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
-#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
-#define SSB_SPROM2_MAXP_A_LO_SHIFT 8
-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
-#define SSB_SPROM2_OPO_VALUE 0x00FF
-#define SSB_SPROM2_OPO_UNUSED 0xFF00
-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
-
-/* SPROM Revision 3 (inherits most data from rev 2) */
-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */
-#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */
-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
-#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
-#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
-#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
-#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
-#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
-#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
-#define SSB_SPROM3_CCKPO_2M_SHIFT 4
-#define SSB_SPROM3_CCKPO_55M 0x0F00 /* 5.5M Rate PO */
-#define SSB_SPROM3_CCKPO_55M_SHIFT 8
-#define SSB_SPROM3_CCKPO_11M 0xF000 /* 11M Rate PO */
-#define SSB_SPROM3_CCKPO_11M_SHIFT 12
-#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
-
-/* SPROM Revision 4 */
-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */
-#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */
-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
-#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
-#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
-#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
-#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
-#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
-#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
-#define SSB_SPROM4_AGAIN0_SHIFT 0
-#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
-#define SSB_SPROM4_AGAIN1_SHIFT 8
-#define SSB_SPROM4_AGAIN23 0x1060
-#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
-#define SSB_SPROM4_AGAIN2_SHIFT 0
-#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
-#define SSB_SPROM4_AGAIN3_SHIFT 8
-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
-#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
-#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-#define SSB_SPROM4_ITSSI_BG_SHIFT 8
-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
-#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
-#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
-#define SSB_SPROM4_ITSSI_A_SHIFT 8
-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
-#define SSB_SPROM4_GPIOA_P1_SHIFT 8
-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
-#define SSB_SPROM4_GPIOB_P3_SHIFT 8
-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
-#define SSB_SPROM4_PA0B2 0x1086
-#define SSB_SPROM4_PA1B0 0x108E
-#define SSB_SPROM4_PA1B1 0x1090
-#define SSB_SPROM4_PA1B2 0x1092
-
-/* Values for SSB_SPROM1_BINF_CCODE */
-enum {
- SSB_SPROM1CCODE_WORLD = 0,
- SSB_SPROM1CCODE_THAILAND,
- SSB_SPROM1CCODE_ISRAEL,
- SSB_SPROM1CCODE_JORDAN,
- SSB_SPROM1CCODE_CHINA,
- SSB_SPROM1CCODE_JAPAN,
- SSB_SPROM1CCODE_USA_CANADA_ANZ,
- SSB_SPROM1CCODE_EUROPE,
- SSB_SPROM1CCODE_USA_LOW,
- SSB_SPROM1CCODE_JAPAN_HIGH,
- SSB_SPROM1CCODE_ALL,
- SSB_SPROM1CCODE_NONE,
-};
-
-/* Address-Match values and masks (SSB_ADMATCHxxx) */
-#define SSB_ADM_TYPE 0x00000003 /* Address type */
-#define SSB_ADM_TYPE0 0
-#define SSB_ADM_TYPE1 1
-#define SSB_ADM_TYPE2 2
-#define SSB_ADM_AD64 0x00000004
-#define SSB_ADM_SZ0 0x000000F8 /* Type0 size */
-#define SSB_ADM_SZ0_SHIFT 3
-#define SSB_ADM_SZ1 0x000001F8 /* Type1 size */
-#define SSB_ADM_SZ1_SHIFT 3
-#define SSB_ADM_SZ2 0x000001F8 /* Type2 size */
-#define SSB_ADM_SZ2_SHIFT 3
-#define SSB_ADM_EN 0x00000400 /* Enable */
-#define SSB_ADM_NEG 0x00000800 /* Negative decode */
-#define SSB_ADM_BASE0 0xFFFFFF00 /* Type0 base address */
-#define SSB_ADM_BASE0_SHIFT 8
-#define SSB_ADM_BASE1 0xFFFFF000 /* Type1 base address for the core */
-#define SSB_ADM_BASE1_SHIFT 12
-#define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */
-#define SSB_ADM_BASE2_SHIFT 16
-
-
-#endif /* LINUX_SSB_REGS_H_ */