brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 118 deletions

diff --git a/target/linux/brcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644
index 17087b36a5..0000000000
--- a/target/linux/brcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -792,6 +792,58 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+	.name				= "96368MVWG",
-+	.expected_cpu_id		= 0x6368,
-+
-+	.has_pci			= 1,
-+
-+	.has_usbd			= 1,
-+
-+	.usbd = {
-+		.use_fullspeed		= 0,
-+		.port_no		= 0,
-+	},
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "port1",
-+			},
-+
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "port2",
-+			},
-+
-+			[4] = {
-+				.used	= 1,
-+				.phy_id	= 0x12,
-+				.name	= "port0",
-+			},
-+
-+			[5] = {
-+				.used	= 1,
-+				.phy_id	= 0x11,
-+				.name	= "port3",
-+			},
-+		},
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -843,6 +895,10 @@ static const struct board_info __initcon
- 	&board_HW553,
- 	&board_spw303v,
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+	&board_96368mvwg,
-+#endif
- };
- 
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -903,6 +959,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
- 		bcm63xx_pci_enabled = 1;
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G2_PCI;
-+
-+		if (BCMCPU_IS_6368())
-+			val |= GPIO_MODE_6368_PCI_REQ1 |
-+				GPIO_MODE_6368_PCI_GNT1 |
-+				GPIO_MODE_6368_PCI_INTB |
-+				GPIO_MODE_6368_PCI_REQ0 |
-+				GPIO_MODE_6368_PCI_GNT0;
- 	}
- #endif
- 
- 	if (board.has_pccard) {
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+		if (BCMCPU_IS_6368())
-+			val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+				GPIO_MODE_6368_PCMCIA_CD2 |
-+				GPIO_MODE_6368_PCMCIA_VS1 |
-+				GPIO_MODE_6368_PCMCIA_VS2;
- 	}
- 
- 	if (board.has_enet0 && !board.enet0.use_internal_phy) {