brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 169 deletions

diff --git a/target/linux/brcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch
deleted file mode 100644
index 58f1b13d38..0000000000
--- a/target/linux/brcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -332,6 +332,9 @@ struct bcm_enet_priv {
- 	struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
- 	int sw_port_link[ENETSW_MAX_PORT];
- 
-+	/* platform device for associated switch */
-+	struct platform_device *b53_device;
-+
- 	/* used to poll switch port state */
- 	struct timer_list swphy_poll;
- 	spinlock_t enetsw_mdio_lock;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/platform_data/b53.h>
- 
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -1937,7 +1938,8 @@ static int bcm_enet_remove(struct platfo
- 	return 0;
- }
- 
--struct platform_driver bcm63xx_enet_driver = {
-+
-+static struct platform_driver bcm63xx_enet_driver = {
- 	.probe	= bcm_enet_probe,
- 	.remove	= bcm_enet_remove,
- 	.driver	= {
-@@ -1946,6 +1948,42 @@ struct platform_driver bcm63xx_enet_driv
- 	},
- };
- 
-+struct b53_platform_data bcm63xx_b53_pdata = {
-+	.chip_id = 0x6300,
-+	.big_endian = 1,
-+};
-+
-+struct platform_device bcm63xx_b53_dev = {
-+	.name		= "b53-switch",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &bcm63xx_b53_pdata,
-+	},
-+};
-+
-+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
-+{
-+	int ret;
-+
-+	bcm63xx_b53_pdata.regs = priv->base;
-+	bcm63xx_b53_pdata.enabled_ports = port_mask;
-+	bcm63xx_b53_pdata.alias = priv->net_dev->name;
-+
-+	ret = platform_device_register(&bcm63xx_b53_dev);
-+	if (!ret)
-+		priv->b53_device = &bcm63xx_b53_dev;
-+
-+	return ret;
-+}
-+
-+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
-+{
-+	if (priv->b53_device)
-+		platform_device_unregister(&bcm63xx_b53_dev);
-+
-+	priv->b53_device = NULL;
-+}
-+
- /*
-  * switch mii access callbacks
-  */
-@@ -2204,29 +2242,6 @@ static int bcm_enetsw_open(struct net_de
- 		enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
- 	}
- 
--	/* reset mib */
--	val = enetsw_readb(priv, ENETSW_GMCR_REG);
--	val |= ENETSW_GMCR_RST_MIB_MASK;
--	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--	mdelay(1);
--	val &= ~ENETSW_GMCR_RST_MIB_MASK;
--	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--	mdelay(1);
--
--	/* force CPU port state */
--	val = enetsw_readb(priv, ENETSW_IMPOV_REG);
--	val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
--	enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
--
--	/* enable switch forward engine */
--	val = enetsw_readb(priv, ENETSW_SWMODE_REG);
--	val |= ENETSW_SWMODE_FWD_EN_MASK;
--	enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
--
--	/* enable jumbo on all ports */
--	enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
--	enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
--
- 	/* initialize flow control buffer allocation */
- 	enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
- 			ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2685,6 +2700,9 @@ static int bcm_enetsw_probe(struct platf
- 	struct bcm63xx_enetsw_platform_data *pd;
- 	struct resource *res_mem;
- 	int ret, irq_rx, irq_tx;
-+	unsigned i, num_ports = 0;
-+	u16 port_mask = BIT(8);
-+	u8 val;
- 
- 	if (!bcm_enet_shared_base[0])
- 		return -EPROBE_DEFER;
-@@ -2767,6 +2785,43 @@ static int bcm_enetsw_probe(struct platf
- 	priv->pdev = pdev;
- 	priv->net_dev = dev;
- 
-+	/* reset mib */
-+	val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+	val |= ENETSW_GMCR_RST_MIB_MASK;
-+	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+	mdelay(1);
-+	val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+	mdelay(1);
-+
-+	/* force CPU port state */
-+	val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+	val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+	enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+	/* enable switch forward engine */
-+	val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+	val |= ENETSW_SWMODE_FWD_EN_MASK;
-+	enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+	/* enable jumbo on all ports */
-+	enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+	enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+	for (i = 0; i < priv->num_ports; i++) {
-+		struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
-+
-+		if (!port->used)
-+			continue;
-+
-+		num_ports++;
-+		port_mask |= BIT(i);
-+	}
-+
-+	/* only register if there is more than one external port */
-+	if (num_ports > 1)
-+		bcmenet_switch_register(priv, port_mask);
-+
- 	return 0;
- 
- out_disable_clk:
-@@ -2788,6 +2843,9 @@ static int bcm_enetsw_remove(struct plat
- 	priv = netdev_priv(dev);
- 	unregister_netdev(dev);
- 
-+	/* remove switch */
-+	bcmenet_switch_unregister(priv);
-+
- 	clk_disable_unprepare(priv->mac_clk);
- 
- 	free_netdev(dev);