brcm63xx: update development kernel to linux 3.14

Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40380

1 files changed, 0 insertions, 84 deletions

diff --git a/target/linux/brcm63xx/patches-3.13/532-board_96328a-1241N.patch b/target/linux/brcm63xx/patches-3.13/532-board_96328a-1241N.patch
deleted file mode 100644
index 3648b2aa4e..0000000000
--- a/target/linux/brcm63xx/patches-3.13/532-board_96328a-1241N.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -180,6 +180,73 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_96328A_1241N = {
-+	.name					= "96328A-1241N",
-+	.expected_cpu_id			= 0x6328,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+	.num_usbh_ports				= 1,
-+	.has_enetsw				= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used		= 1,
-+				.phy_id		= 1,
-+				.name		= "Port 1",
-+			},
-+			[1] = {
-+				.used		= 1,
-+				.phy_id		= 2,
-+				.name		= "Port 2",
-+			},
-+			[2] = {
-+				.used		= 1,
-+				.phy_id		= 3,
-+				.name		= "Port 3",
-+			},
-+			[3] = {
-+				.used		= 1,
-+				.phy_id		= 4,
-+				.name		= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.leds = {
-+		{
-+			.name			= "96328A-1241N:green:power",
-+			.gpio			= 4,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+		{
-+			.name			= "96328A-1241N:red:alarm",
-+			.gpio			= 2,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "96328A-1241N:green:inet",
-+			.gpio			= 3,
-+			.active_low		= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "reset",
-+			.gpio			= 23,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+
- static struct board_info __initdata board_96328A_1441N1 = {
- 	.name					= "96328A-1441N1",
- 	.expected_cpu_id			= 0x6328,
-@@ -3171,6 +3238,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
-+	&board_96328A_1241N,
- 	&board_96328A_1441N1,
- 	&board_963281TAN,
- 	&board_963281T_TEF,