[brcm47xx] Remove patches already applied in generic and refresh patches.

This fixes #6200




git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18597 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 4 insertions, 843 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch
index a6a5e95198..837bd43e75 100644
--- a/target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch
+++ b/target/linux/brcm47xx/patches-2.6.28/220-bcm5354.patch
@@ -1,6 +1,6 @@
 --- a/drivers/ssb/driver_chipcommon.c
 +++ b/drivers/ssb/driver_chipcommon.c
-@@ -270,6 +270,8 @@ void ssb_chipco_resume(struct ssb_chipco
+@@ -258,6 +258,8 @@ void ssb_chipco_resume(struct ssb_chipco
  void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
                               u32 *plltype, u32 *n, u32 *m)
  {
@@ -9,7 +9,7 @@
  	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
  	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
  	switch (*plltype) {
-@@ -293,6 +295,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+@@ -281,6 +283,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
  void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
  				 u32 *plltype, u32 *n, u32 *m)
  {
@@ -31,7 +31,7 @@
  	}
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -1011,6 +1011,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -1013,6 +1013,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
  
  	if (bus->chip_id == 0x5365) {
  		rate = 100000000;
diff --git a/target/linux/brcm47xx/patches-2.6.28/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-2.6.28/280-activate_ssb_support_in_usb.patch
deleted file mode 100644
index aeb9d334c3..0000000000
--- a/target/linux/brcm47xx/patches-2.6.28/280-activate_ssb_support_in_usb.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -126,6 +126,8 @@ config SSB_DRIVER_MIPS
- config SSB_EMBEDDED
- 	bool
- 	depends on SSB_DRIVER_MIPS
-+	select USB_EHCI_HCD_SSB if USB_EHCI_HCD
-+	select USB_OHCI_HCD_SSB if USB_OHCI_HCD
- 	default y
- 
- config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch b/target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch
index 6cba540530..c3a8a5738a 100644
--- a/target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch
+++ b/target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch
@@ -90,7 +90,7 @@
  {
  	char buf[CL_SIZE];
  
-@@ -146,9 +122,12 @@ static __init void prom_init_mem(void)
+@@ -154,9 +130,12 @@ static __init void prom_init_mem(void)
  
  void __init prom_init(void)
  {
diff --git a/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch b/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch
deleted file mode 100644
index 7ab70aa54a..0000000000
--- a/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch
+++ /dev/null
@@ -1,823 +0,0 @@
-Sent to mainline on 2009 Feb 03.
-
-For further modifications, please use separate patch files. This simpifies
-keeping track of what is upstream and what is not. Thanks.
-
---mb
-
-
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST)		+= pcmcia.
- 
- # built-in drivers
- ssb-y					+= driver_chipcommon.o
-+ssb-y					+= driver_chipcommon_pmu.o
- ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
---- /dev/null
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -0,0 +1,508 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom ChipCommon Power Management Unit driver
-+ *
-+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2007, Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_regs.h>
-+#include <linux/ssb/ssb_driver_chipcommon.h>
-+#include <linux/delay.h>
-+
-+#include "ssb_private.h"
-+
-+static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
-+{
-+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
-+	return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA);
-+}
-+
-+static void ssb_chipco_pll_write(struct ssb_chipcommon *cc,
-+				 u32 offset, u32 value)
-+{
-+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
-+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
-+}
-+
-+struct pmu0_plltab_entry {
-+	u16 freq;	/* Crystal frequency in kHz.*/
-+	u8 xf;		/* Crystal frequency value for PMU control */
-+	u8 wb_int;
-+	u32 wb_frac;
-+};
-+
-+static const struct pmu0_plltab_entry pmu0_plltab[] = {
-+	{ .freq = 12000, .xf =  1, .wb_int = 73, .wb_frac = 349525, },
-+	{ .freq = 13000, .xf =  2, .wb_int = 67, .wb_frac = 725937, },
-+	{ .freq = 14400, .xf =  3, .wb_int = 61, .wb_frac = 116508, },
-+	{ .freq = 15360, .xf =  4, .wb_int = 57, .wb_frac = 305834, },
-+	{ .freq = 16200, .xf =  5, .wb_int = 54, .wb_frac = 336579, },
-+	{ .freq = 16800, .xf =  6, .wb_int = 52, .wb_frac = 399457, },
-+	{ .freq = 19200, .xf =  7, .wb_int = 45, .wb_frac = 873813, },
-+	{ .freq = 19800, .xf =  8, .wb_int = 44, .wb_frac = 466033, },
-+	{ .freq = 20000, .xf =  9, .wb_int = 44, .wb_frac = 0,      },
-+	{ .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, },
-+	{ .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, },
-+	{ .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, },
-+	{ .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, },
-+	{ .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0,      },
-+};
-+#define SSB_PMU0_DEFAULT_XTALFREQ	20000
-+
-+static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq)
-+{
-+	const struct pmu0_plltab_entry *e;
-+	unsigned int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) {
-+		e = &pmu0_plltab[i];
-+		if (e->freq == crystalfreq)
-+			return e;
-+	}
-+
-+	return NULL;
-+}
-+
-+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
-+static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
-+				u32 crystalfreq)
-+{
-+	struct ssb_bus *bus = cc->dev->bus;
-+	const struct pmu0_plltab_entry *e = NULL;
-+	u32 pmuctl, tmp, pllctl;
-+	unsigned int i;
-+
-+	if ((bus->chip_id == 0x5354) && !crystalfreq) {
-+		/* The 5354 crystal freq is 25MHz */
-+		crystalfreq = 25000;
-+	}
-+	if (crystalfreq)
-+		e = pmu0_plltab_find_entry(crystalfreq);
-+	if (!e)
-+		e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ);
-+	BUG_ON(!e);
-+	crystalfreq = e->freq;
-+	cc->pmu.crystalfreq = e->freq;
-+
-+	/* Check if the PLL already is programmed to this frequency. */
-+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+	if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
-+		/* We're already there... */
-+		return;
-+	}
-+
-+	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-+		   (crystalfreq / 1000), (crystalfreq % 1000));
-+
-+	/* First turn the PLL off. */
-+	switch (bus->chip_id) {
-+	case 0x4328:
-+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+			      ~(1 << SSB_PMURES_4328_BB_PLL_PU));
-+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+			      ~(1 << SSB_PMURES_4328_BB_PLL_PU));
-+		break;
-+	case 0x5354:
-+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+			      ~(1 << SSB_PMURES_5354_BB_PLL_PU));
-+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+			      ~(1 << SSB_PMURES_5354_BB_PLL_PU));
-+		break;
-+	default:
-+		SSB_WARN_ON(1);
-+	}
-+	for (i = 1500; i; i--) {
-+		tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+		if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
-+			break;
-+		udelay(10);
-+	}
-+	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-+		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
-+
-+	/* Set PDIV in PLL control 0. */
-+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
-+	if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ)
-+		pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK;
-+	else
-+		pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK;
-+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl);
-+
-+	/* Set WILD in PLL control 1. */
-+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1);
-+	pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD;
-+	pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK);
-+	pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK;
-+	pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK;
-+	if (e->wb_frac == 0)
-+		pllctl |= SSB_PMU0_PLLCTL1_STOPMOD;
-+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl);
-+
-+	/* Set WILD in PLL control 2. */
-+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2);
-+	pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI;
-+	pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI;
-+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl);
-+
-+	/* Set the crystalfrequency and the divisor. */
-+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+	pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+	pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
-+			& SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+	pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+	pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+	chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
-+}
-+
-+struct pmu1_plltab_entry {
-+	u16 freq;	/* Crystal frequency in kHz.*/
-+	u8 xf;		/* Crystal frequency value for PMU control */
-+	u8 ndiv_int;
-+	u32 ndiv_frac;
-+	u8 p1div;
-+	u8 p2div;
-+};
-+
-+static const struct pmu1_plltab_entry pmu1_plltab[] = {
-+	{ .freq = 12000, .xf =  1, .p1div = 3, .p2div = 22, .ndiv_int =  0x9, .ndiv_frac = 0xFFFFEF, },
-+	{ .freq = 13000, .xf =  2, .p1div = 1, .p2div =  6, .ndiv_int =  0xb, .ndiv_frac = 0x483483, },
-+	{ .freq = 14400, .xf =  3, .p1div = 1, .p2div = 10, .ndiv_int =  0xa, .ndiv_frac = 0x1C71C7, },
-+	{ .freq = 15360, .xf =  4, .p1div = 1, .p2div =  5, .ndiv_int =  0xb, .ndiv_frac = 0x755555, },
-+	{ .freq = 16200, .xf =  5, .p1div = 1, .p2div = 10, .ndiv_int =  0x5, .ndiv_frac = 0x6E9E06, },
-+	{ .freq = 16800, .xf =  6, .p1div = 1, .p2div = 10, .ndiv_int =  0x5, .ndiv_frac = 0x3CF3CF, },
-+	{ .freq = 19200, .xf =  7, .p1div = 1, .p2div =  9, .ndiv_int =  0x5, .ndiv_frac = 0x17B425, },
-+	{ .freq = 19800, .xf =  8, .p1div = 1, .p2div = 11, .ndiv_int =  0x4, .ndiv_frac = 0xA57EB,  },
-+	{ .freq = 20000, .xf =  9, .p1div = 1, .p2div = 11, .ndiv_int =  0x4, .ndiv_frac = 0,        },
-+	{ .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int =  0xa, .ndiv_frac = 0,        },
-+	{ .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int =  0xb, .ndiv_frac = 0,        },
-+	{ .freq = 26000, .xf = 12, .p1div = 1, .p2div =  2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, },
-+	{ .freq = 30000, .xf = 13, .p1div = 3, .p2div =  8, .ndiv_int =  0xb, .ndiv_frac = 0,        },
-+	{ .freq = 38400, .xf = 14, .p1div = 1, .p2div =  5, .ndiv_int =  0x4, .ndiv_frac = 0x955555, },
-+	{ .freq = 40000, .xf = 15, .p1div = 1, .p2div =  2, .ndiv_int =  0xb, .ndiv_frac = 0,        },
-+};
-+
-+#define SSB_PMU1_DEFAULT_XTALFREQ	15360
-+
-+static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq)
-+{
-+	const struct pmu1_plltab_entry *e;
-+	unsigned int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) {
-+		e = &pmu1_plltab[i];
-+		if (e->freq == crystalfreq)
-+			return e;
-+	}
-+
-+	return NULL;
-+}
-+
-+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
-+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
-+				u32 crystalfreq)
-+{
-+	struct ssb_bus *bus = cc->dev->bus;
-+	const struct pmu1_plltab_entry *e = NULL;
-+	u32 buffer_strength = 0;
-+	u32 tmp, pllctl, pmuctl;
-+	unsigned int i;
-+
-+	if (bus->chip_id == 0x4312) {
-+		/* We do not touch the BCM4312 PLL and assume
-+		 * the default crystal settings work out-of-the-box. */
-+		cc->pmu.crystalfreq = 20000;
-+		return;
-+	}
-+
-+	if (crystalfreq)
-+		e = pmu1_plltab_find_entry(crystalfreq);
-+	if (!e)
-+		e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ);
-+	BUG_ON(!e);
-+	crystalfreq = e->freq;
-+	cc->pmu.crystalfreq = e->freq;
-+
-+	/* Check if the PLL already is programmed to this frequency. */
-+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+	if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
-+		/* We're already there... */
-+		return;
-+	}
-+
-+	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-+		   (crystalfreq / 1000), (crystalfreq % 1000));
-+
-+	/* First turn the PLL off. */
-+	switch (bus->chip_id) {
-+	case 0x4325:
-+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+			      ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
-+				(1 << SSB_PMURES_4325_HT_AVAIL)));
-+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+			      ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
-+				(1 << SSB_PMURES_4325_HT_AVAIL)));
-+		/* Adjust the BBPLL to 2 on all channels later. */
-+		buffer_strength = 0x222222;
-+		break;
-+	default:
-+		SSB_WARN_ON(1);
-+	}
-+	for (i = 1500; i; i--) {
-+		tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+		if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
-+			break;
-+		udelay(10);
-+	}
-+	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-+		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
-+
-+	/* Set p1div and p2div. */
-+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
-+	pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV);
-+	pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV;
-+	pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV;
-+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
-+
-+	/* Set ndiv int and ndiv mode */
-+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2);
-+	pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE);
-+	pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT;
-+	pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE;
-+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl);
-+
-+	/* Set ndiv frac */
-+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3);
-+	pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC;
-+	pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC;
-+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl);
-+
-+	/* Change the drive strength, if required. */
-+	if (buffer_strength) {
-+		pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5);
-+		pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV;
-+		pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV;
-+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl);
-+	}
-+
-+	/* Tune the crystalfreq and the divisor. */
-+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+	pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ);
-+	pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
-+			& SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+	pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+	chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
-+}
-+
-+static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
-+{
-+	struct ssb_bus *bus = cc->dev->bus;
-+	u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
-+
-+	if (bus->bustype == SSB_BUSTYPE_SSB) {
-+		/* TODO: The user may override the crystal frequency. */
-+	}
-+
-+	switch (bus->chip_id) {
-+	case 0x4312:
-+	case 0x4325:
-+		ssb_pmu1_pllinit_r0(cc, crystalfreq);
-+		break;
-+	case 0x4328:
-+	case 0x5354:
-+		ssb_pmu0_pllinit_r0(cc, crystalfreq);
-+		break;
-+	default:
-+		ssb_printk(KERN_ERR PFX
-+			   "ERROR: PLL init unknown for device %04X\n",
-+			   bus->chip_id);
-+	}
-+}
-+
-+struct pmu_res_updown_tab_entry {
-+	u8 resource;	/* The resource number */
-+	u16 updown;	/* The updown value */
-+};
-+
-+enum pmu_res_depend_tab_task {
-+	PMU_RES_DEP_SET = 1,
-+	PMU_RES_DEP_ADD,
-+	PMU_RES_DEP_REMOVE,
-+};
-+
-+struct pmu_res_depend_tab_entry {
-+	u8 resource;	/* The resource number */
-+	u8 task;	/* SET | ADD | REMOVE */
-+	u32 depend;	/* The depend mask */
-+};
-+
-+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = {
-+	{ .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM,		.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_BB_SWITCHER_PWM,		.updown = 0x1F01, },
-+	{ .resource = SSB_PMURES_4328_BB_SWITCHER_BURST,	.updown = 0x010F, },
-+	{ .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST,	.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_ILP_REQUEST,		.updown = 0x0202, },
-+	{ .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM,	.updown = 0x0F01, },
-+	{ .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST,	.updown = 0x0F01, },
-+	{ .resource = SSB_PMURES_4328_ROM_SWITCH,		.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_PA_REF_LDO,		.updown = 0x0F01, },
-+	{ .resource = SSB_PMURES_4328_RADIO_LDO,		.updown = 0x0F01, },
-+	{ .resource = SSB_PMURES_4328_AFE_LDO,			.updown = 0x0F01, },
-+	{ .resource = SSB_PMURES_4328_PLL_LDO,			.updown = 0x0F01, },
-+	{ .resource = SSB_PMURES_4328_BG_FILTBYP,		.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_TX_FILTBYP,		.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_RX_FILTBYP,		.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_XTAL_PU,			.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_XTAL_EN,			.updown = 0xA001, },
-+	{ .resource = SSB_PMURES_4328_BB_PLL_FILTBYP,		.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_RF_PLL_FILTBYP,		.updown = 0x0101, },
-+	{ .resource = SSB_PMURES_4328_BB_PLL_PU,		.updown = 0x0701, },
-+};
-+
-+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = {
-+	{
-+		/* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */
-+		.resource = SSB_PMURES_4328_ILP_REQUEST,
-+		.task = PMU_RES_DEP_SET,
-+		.depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
-+			   (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)),
-+	},
-+};
-+
-+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = {
-+	{ .resource = SSB_PMURES_4325_XTAL_PU,			.updown = 0x1501, },
-+};
-+
-+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = {
-+	{
-+		/* Adjust HT-Available dependencies. */
-+		.resource = SSB_PMURES_4325_HT_AVAIL,
-+		.task = PMU_RES_DEP_ADD,
-+		.depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) |
-+			   (1 << SSB_PMURES_4325_TX_PWRSW_PU) |
-+			   (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) |
-+			   (1 << SSB_PMURES_4325_AFE_PWRSW_PU)),
-+	},
-+};
-+
-+static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
-+{
-+	struct ssb_bus *bus = cc->dev->bus;
-+	u32 min_msk = 0, max_msk = 0;
-+	unsigned int i;
-+	const struct pmu_res_updown_tab_entry *updown_tab = NULL;
-+	unsigned int updown_tab_size;
-+	const struct pmu_res_depend_tab_entry *depend_tab = NULL;
-+	unsigned int depend_tab_size;
-+
-+	switch (bus->chip_id) {
-+	case 0x4312:
-+		/* We keep the default settings:
-+		 * min_msk = 0xCBB
-+		 * max_msk = 0x7FFFF
-+		 */
-+		break;
-+	case 0x4325:
-+		/* Power OTP down later. */
-+		min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) |
-+			  (1 << SSB_PMURES_4325_LNLDO2_PU);
-+		if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) &
-+		    SSB_CHIPCO_CHST_4325_PMUTOP_2B)
-+			min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST);
-+		/* The PLL may turn on, if it decides so. */
-+		max_msk = 0xFFFFF;
-+		updown_tab = pmu_res_updown_tab_4325a0;
-+		updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0);
-+		depend_tab = pmu_res_depend_tab_4325a0;
-+		depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0);
-+		break;
-+	case 0x4328:
-+		min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
-+			  (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) |
-+			  (1 << SSB_PMURES_4328_XTAL_EN);
-+		/* The PLL may turn on, if it decides so. */
-+		max_msk = 0xFFFFF;
-+		updown_tab = pmu_res_updown_tab_4328a0;
-+		updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0);
-+		depend_tab = pmu_res_depend_tab_4328a0;
-+		depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0);
-+		break;
-+	case 0x5354:
-+		/* The PLL may turn on, if it decides so. */
-+		max_msk = 0xFFFFF;
-+		break;
-+	default:
-+		ssb_printk(KERN_ERR PFX
-+			   "ERROR: PMU resource config unknown for device %04X\n",
-+			   bus->chip_id);
-+	}
-+
-+	if (updown_tab) {
-+		for (i = 0; i < updown_tab_size; i++) {
-+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
-+				       updown_tab[i].resource);
-+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM,
-+				       updown_tab[i].updown);
-+		}
-+	}
-+	if (depend_tab) {
-+		for (i = 0; i < depend_tab_size; i++) {
-+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
-+				       depend_tab[i].resource);
-+			switch (depend_tab[i].task) {
-+			case PMU_RES_DEP_SET:
-+				chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+					       depend_tab[i].depend);
-+				break;
-+			case PMU_RES_DEP_ADD:
-+				chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+					     depend_tab[i].depend);
-+				break;
-+			case PMU_RES_DEP_REMOVE:
-+				chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+					      ~(depend_tab[i].depend));
-+				break;
-+			default:
-+				SSB_WARN_ON(1);
-+			}
-+		}
-+	}
-+
-+	/* Set the resource masks. */
-+	if (min_msk)
-+		chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk);
-+	if (max_msk)
-+		chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
-+}
-+
-+void ssb_pmu_init(struct ssb_chipcommon *cc)
-+{
-+	struct ssb_bus *bus = cc->dev->bus;
-+	u32 pmucap;
-+
-+	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-+		return;
-+
-+	pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
-+	cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
-+
-+	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
-+		    cc->pmu.rev, pmucap);
-+
-+	if (cc->pmu.rev >= 1) {
-+		if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
-+			chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
-+				      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
-+		} else {
-+			chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
-+				     SSB_CHIPCO_PMU_CTL_NOILPONW);
-+		}
-+	}
-+	ssb_pmu_pll_init(cc);
-+	ssb_pmu_resources_init(cc);
-+}
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -26,19 +26,6 @@ enum ssb_clksrc {
- };
- 
- 
--static inline u32 chipco_read32(struct ssb_chipcommon *cc,
--				u16 offset)
--{
--	return ssb_read32(cc->dev, offset);
--}
--
--static inline void chipco_write32(struct ssb_chipcommon *cc,
--				  u16 offset,
--				  u32 value)
--{
--	ssb_write32(cc->dev, offset, value);
--}
--
- static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
- 					u32 mask, u32 value)
- {
-@@ -246,6 +233,7 @@ void ssb_chipcommon_init(struct ssb_chip
- {
- 	if (!cc->dev)
- 		return; /* We don't have a ChipCommon */
-+	ssb_pmu_init(cc);
- 	chipco_powercontrol_init(cc);
- 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
- 	calc_fast_powerup_delay(cc);
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -181,6 +181,16 @@
- #define SSB_CHIPCO_PROG_WAITCNT		0x0124
- #define SSB_CHIPCO_FLASH_CFG		0x0128
- #define SSB_CHIPCO_FLASH_WAITCNT	0x012C
-+#define SSB_CHIPCO_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
-+#define  SSB_CHIPCO_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
-+#define  SSB_CHIPCO_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
-+#define  SSB_CHIPCO_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
-+#define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
-+#define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
-+#define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
-+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00010000 /* HT available */
-+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00020000 /* APL available */
-+#define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
- #define SSB_CHIPCO_UART0_DATA		0x0300
- #define SSB_CHIPCO_UART0_IMR		0x0304
- #define SSB_CHIPCO_UART0_FCR		0x0308
-@@ -197,6 +207,196 @@
- #define SSB_CHIPCO_UART1_LSR		0x0414
- #define SSB_CHIPCO_UART1_MSR		0x0418
- #define SSB_CHIPCO_UART1_SCRATCH	0x041C
-+/* PMU registers (rev >= 20) */
-+#define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
-+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
-+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
-+#define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
-+#define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
-+#define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
-+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ		0x0000007C /* Crystal freq */
-+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT	2
-+#define  SSB_CHIPCO_PMU_CTL_ILPDIVEN		0x00000002 /* ILP div enable */
-+#define  SSB_CHIPCO_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
-+#define SSB_CHIPCO_PMU_CAP			0x0604 /* PMU capabilities */
-+#define  SSB_CHIPCO_PMU_CAP_REVISION		0x000000FF /* Revision mask */
-+#define SSB_CHIPCO_PMU_STAT			0x0608 /* PMU status */
-+#define  SSB_CHIPCO_PMU_STAT_INTPEND		0x00000040 /* Interrupt pending */
-+#define  SSB_CHIPCO_PMU_STAT_SBCLKST		0x00000030 /* Backplane clock status? */
-+#define  SSB_CHIPCO_PMU_STAT_HAVEALP		0x00000008 /* ALP available */
-+#define  SSB_CHIPCO_PMU_STAT_HAVEHT		0x00000004 /* HT available */
-+#define  SSB_CHIPCO_PMU_STAT_RESINIT		0x00000003 /* Res init */
-+#define SSB_CHIPCO_PMU_RES_STAT			0x060C /* PMU res status */
-+#define SSB_CHIPCO_PMU_RES_PEND			0x0610 /* PMU res pending */
-+#define SSB_CHIPCO_PMU_TIMER			0x0614 /* PMU timer */
-+#define SSB_CHIPCO_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
-+#define SSB_CHIPCO_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
-+#define SSB_CHIPCO_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
-+#define SSB_CHIPCO_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
-+#define SSB_CHIPCO_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
-+#define SSB_CHIPCO_PMU_RES_TIMER		0x062C /* PMU res timer */
-+#define SSB_CHIPCO_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
-+#define SSB_CHIPCO_PMU_WATCHDOG			0x0634 /* PMU watchdog */
-+#define SSB_CHIPCO_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
-+#define SSB_CHIPCO_PMU_RES_REQT			0x0644 /* PMU res req timer */
-+#define SSB_CHIPCO_PMU_RES_REQM			0x0648 /* PMU res req mask */
-+#define SSB_CHIPCO_CHIPCTL_ADDR			0x0650
-+#define SSB_CHIPCO_CHIPCTL_DATA			0x0654
-+#define SSB_CHIPCO_REGCTL_ADDR			0x0658
-+#define SSB_CHIPCO_REGCTL_DATA			0x065C
-+#define SSB_CHIPCO_PLLCTL_ADDR			0x0660
-+#define SSB_CHIPCO_PLLCTL_DATA			0x0664
-+
-+
-+
-+/** PMU PLL registers */
-+
-+/* PMU rev 0 PLL registers */
-+#define SSB_PMU0_PLLCTL0			0
-+#define  SSB_PMU0_PLLCTL0_PDIV_MSK		0x00000001
-+#define  SSB_PMU0_PLLCTL0_PDIV_FREQ		25000 /* kHz */
-+#define SSB_PMU0_PLLCTL1			1
-+#define  SSB_PMU0_PLLCTL1_WILD_IMSK		0xF0000000 /* Wild int mask (low nibble) */
-+#define  SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT	28
-+#define  SSB_PMU0_PLLCTL1_WILD_FMSK		0x0FFFFF00 /* Wild frac mask */
-+#define  SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT	8
-+#define  SSB_PMU0_PLLCTL1_STOPMOD		0x00000040 /* Stop mod */
-+#define SSB_PMU0_PLLCTL2			2
-+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI		0x0000000F /* Wild int mask (high nibble) */
-+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT	0
-+
-+/* PMU rev 1 PLL registers */
-+#define SSB_PMU1_PLLCTL0			0
-+#define  SSB_PMU1_PLLCTL0_P1DIV			0x00F00000 /* P1 div */
-+#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT		20
-+#define  SSB_PMU1_PLLCTL0_P2DIV			0x0F000000 /* P2 div */
-+#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT		24
-+#define SSB_PMU1_PLLCTL1			1
-+#define  SSB_PMU1_PLLCTL1_M1DIV			0x000000FF /* M1 div */
-+#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT		0
-+#define  SSB_PMU1_PLLCTL1_M2DIV			0x0000FF00 /* M2 div */
-+#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT		8
-+#define  SSB_PMU1_PLLCTL1_M3DIV			0x00FF0000 /* M3 div */
-+#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT		16
-+#define  SSB_PMU1_PLLCTL1_M4DIV			0xFF000000 /* M4 div */
-+#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT		24
-+#define SSB_PMU1_PLLCTL2			2
-+#define  SSB_PMU1_PLLCTL2_M5DIV			0x000000FF /* M5 div */
-+#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT		0
-+#define  SSB_PMU1_PLLCTL2_M6DIV			0x0000FF00 /* M6 div */
-+#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT		8
-+#define  SSB_PMU1_PLLCTL2_NDIVMODE		0x000E0000 /* NDIV mode */
-+#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT	17
-+#define  SSB_PMU1_PLLCTL2_NDIVINT		0x1FF00000 /* NDIV int */
-+#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT		20
-+#define SSB_PMU1_PLLCTL3			3
-+#define  SSB_PMU1_PLLCTL3_NDIVFRAC		0x00FFFFFF /* NDIV frac */
-+#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT	0
-+#define SSB_PMU1_PLLCTL4			4
-+#define SSB_PMU1_PLLCTL5			5
-+#define  SSB_PMU1_PLLCTL5_CLKDRV		0xFFFFFF00 /* clk drv */
-+#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT		8
-+
-+/* BCM4312 PLL resource numbers. */
-+#define SSB_PMURES_4312_SWITCHER_BURST		0
-+#define SSB_PMURES_4312_SWITCHER_PWM    	1
-+#define SSB_PMURES_4312_PA_REF_LDO		2
-+#define SSB_PMURES_4312_CORE_LDO_BURST		3
-+#define SSB_PMURES_4312_CORE_LDO_PWM		4
-+#define SSB_PMURES_4312_RADIO_LDO		5
-+#define SSB_PMURES_4312_ILP_REQUEST		6
-+#define SSB_PMURES_4312_BG_FILTBYP		7
-+#define SSB_PMURES_4312_TX_FILTBYP		8
-+#define SSB_PMURES_4312_RX_FILTBYP		9
-+#define SSB_PMURES_4312_XTAL_PU			10
-+#define SSB_PMURES_4312_ALP_AVAIL		11
-+#define SSB_PMURES_4312_BB_PLL_FILTBYP		12
-+#define SSB_PMURES_4312_RF_PLL_FILTBYP		13
-+#define SSB_PMURES_4312_HT_AVAIL		14
-+
-+/* BCM4325 PLL resource numbers. */
-+#define SSB_PMURES_4325_BUCK_BOOST_BURST	0
-+#define SSB_PMURES_4325_CBUCK_BURST		1
-+#define SSB_PMURES_4325_CBUCK_PWM		2
-+#define SSB_PMURES_4325_CLDO_CBUCK_BURST	3
-+#define SSB_PMURES_4325_CLDO_CBUCK_PWM		4
-+#define SSB_PMURES_4325_BUCK_BOOST_PWM		5
-+#define SSB_PMURES_4325_ILP_REQUEST		6
-+#define SSB_PMURES_4325_ABUCK_BURST		7
-+#define SSB_PMURES_4325_ABUCK_PWM		8
-+#define SSB_PMURES_4325_LNLDO1_PU		9
-+#define SSB_PMURES_4325_LNLDO2_PU		10
-+#define SSB_PMURES_4325_LNLDO3_PU		11
-+#define SSB_PMURES_4325_LNLDO4_PU		12
-+#define SSB_PMURES_4325_XTAL_PU			13
-+#define SSB_PMURES_4325_ALP_AVAIL		14
-+#define SSB_PMURES_4325_RX_PWRSW_PU		15
-+#define SSB_PMURES_4325_TX_PWRSW_PU		16
-+#define SSB_PMURES_4325_RFPLL_PWRSW_PU		17
-+#define SSB_PMURES_4325_LOGEN_PWRSW_PU		18
-+#define SSB_PMURES_4325_AFE_PWRSW_PU		19
-+#define SSB_PMURES_4325_BBPLL_PWRSW_PU		20
-+#define SSB_PMURES_4325_HT_AVAIL		21
-+
-+/* BCM4328 PLL resource numbers. */
-+#define SSB_PMURES_4328_EXT_SWITCHER_PWM	0
-+#define SSB_PMURES_4328_BB_SWITCHER_PWM		1
-+#define SSB_PMURES_4328_BB_SWITCHER_BURST	2
-+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST	3
-+#define SSB_PMURES_4328_ILP_REQUEST		4
-+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM	5
-+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST	6
-+#define SSB_PMURES_4328_ROM_SWITCH		7
-+#define SSB_PMURES_4328_PA_REF_LDO		8
-+#define SSB_PMURES_4328_RADIO_LDO		9
-+#define SSB_PMURES_4328_AFE_LDO			10
-+#define SSB_PMURES_4328_PLL_LDO			11
-+#define SSB_PMURES_4328_BG_FILTBYP		12
-+#define SSB_PMURES_4328_TX_FILTBYP		13
-+#define SSB_PMURES_4328_RX_FILTBYP		14
-+#define SSB_PMURES_4328_XTAL_PU			15
-+#define SSB_PMURES_4328_XTAL_EN			16
-+#define SSB_PMURES_4328_BB_PLL_FILTBYP		17
-+#define SSB_PMURES_4328_RF_PLL_FILTBYP		18
-+#define SSB_PMURES_4328_BB_PLL_PU		19
-+
-+/* BCM5354 PLL resource numbers. */
-+#define SSB_PMURES_5354_EXT_SWITCHER_PWM	0
-+#define SSB_PMURES_5354_BB_SWITCHER_PWM		1
-+#define SSB_PMURES_5354_BB_SWITCHER_BURST	2
-+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST	3
-+#define SSB_PMURES_5354_ILP_REQUEST		4
-+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM	5
-+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST	6
-+#define SSB_PMURES_5354_ROM_SWITCH		7
-+#define SSB_PMURES_5354_PA_REF_LDO		8
-+#define SSB_PMURES_5354_RADIO_LDO		9
-+#define SSB_PMURES_5354_AFE_LDO			10
-+#define SSB_PMURES_5354_PLL_LDO			11
-+#define SSB_PMURES_5354_BG_FILTBYP		12
-+#define SSB_PMURES_5354_TX_FILTBYP		13
-+#define SSB_PMURES_5354_RX_FILTBYP		14
-+#define SSB_PMURES_5354_XTAL_PU			15
-+#define SSB_PMURES_5354_XTAL_EN			16
-+#define SSB_PMURES_5354_BB_PLL_FILTBYP		17
-+#define SSB_PMURES_5354_RF_PLL_FILTBYP		18
-+#define SSB_PMURES_5354_BB_PLL_PU		19
-+
-+
-+
-+/** Chip specific Chip-Status register contents. */
-+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
-+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
-+#define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
-+#define SSB_CHIPCO_CHST_4325_OTP_SEL		2 /* OTP is powered up, no SPROM */
-+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN		3 /* OTP is powered down, SPROM is present */
-+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE	0x00000004
-+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT  2
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALID		0x00000008
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT	3
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE		0x000001F0
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
-+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
- 
- 
- 
-@@ -353,11 +553,20 @@
- struct ssb_device;
- struct ssb_serial_port;
- 
-+/* Data for the PMU, if available.
-+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
-+ */
-+struct ssb_chipcommon_pmu {
-+	u8 rev;			/* PMU revision */
-+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
-+};
-+
- struct ssb_chipcommon {
- 	struct ssb_device *dev;
- 	u32 capabilities;
- 	/* Fast Powerup Delay constant */
- 	u16 fast_pwrup_delay;
-+	struct ssb_chipcommon_pmu pmu;
- };
- 
- static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(
- 	return (cc->dev != NULL);
- }
- 
-+/* Register access */
-+#define chipco_read32(cc, offset)	ssb_read32((cc)->dev, offset)
-+#define chipco_write32(cc, offset, val)	ssb_write32((cc)->dev, offset, val)
-+
-+#define chipco_mask32(cc, offset, mask) \
-+		chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
-+#define chipco_set32(cc, offset, set) \
-+		chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
-+#define chipco_maskset32(cc, offset, mask, set) \
-+		chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
-+
- extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
- 
- extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
-@@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct
- 				  struct ssb_serial_port *ports);
- #endif /* CONFIG_SSB_SERIAL */
- 
-+/* PMU support */
-+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
-+
-+
- #endif /* LINUX_SSB_CHIPCO_H_ */