brcm2708: rename all patches from raspberrypi git tree to use 950 prefix

Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 45 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch b/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch
new file mode 100644
index 0000000000..9b2a613236
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch
@@ -0,0 +1,45 @@
+From 492d6b9c3f1f8cc1eb890dc0eafacae51d6ba2f0 Mon Sep 17 00:00:00 2001
+From: Martin Sperl <kernel@martin.sperl.org>
+Date: Fri, 2 Sep 2016 16:45:27 +0100
+Subject: [PATCH] Register the clocks early during the boot process, so that
+ special/critical clocks can get enabled early on in the boot process avoiding
+ the risk of disabling a clock, pll_divider or pll when a claiming driver
+ fails to install propperly - maybe it needs to defer.
+
+Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 15 +++++++++++++--
+ 1 file changed, 13 insertions(+), 2 deletions(-)
+
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1903,8 +1903,15 @@ static int bcm2835_clk_probe(struct plat
+ 	if (ret)
+ 		return ret;
+ 
+-	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
++	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ 				      &cprman->onecell);
++	if (ret)
++		return ret;
++
++	/* note that we have registered all the clocks */
++	dev_dbg(dev, "registered %d clocks\n", asize);
++
++	return 0;
+ }
+ 
+ static const struct of_device_id bcm2835_clk_of_match[] = {
+@@ -1921,7 +1928,11 @@ static struct platform_driver bcm2835_cl
+ 	.probe          = bcm2835_clk_probe,
+ };
+ 
+-builtin_platform_driver(bcm2835_clk_driver);
++static int __init __bcm2835_clk_driver_init(void)
++{
++	return platform_driver_register(&bcm2835_clk_driver);
++}
++core_initcall(__bcm2835_clk_driver_init);
+ 
+ MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+ MODULE_DESCRIPTION("BCM2835 clock driver");