brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 67 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0748-net-phy-bcm54xx-Encode-link-speed-and-activity-into-.patch b/target/linux/brcm2708/patches-4.19/950-0748-net-phy-bcm54xx-Encode-link-speed-and-activity-into-.patch
deleted file mode 100644
index 9a5e29c208..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0748-net-phy-bcm54xx-Encode-link-speed-and-activity-into-.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From b1e290ec968186530ec59479adfba89d2cfe21c8 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <olteanv@gmail.com>
-Date: Sun, 24 Mar 2019 00:18:46 +0200
-Subject: [PATCH] net: phy: bcm54xx: Encode link speed and activity
- into LEDs
-
-Previously the green and amber LEDs on this quad PHY were solid, to
-indicate an encoding of the link speed (10/100/1000).
-
-This keeps the LEDs always on just as before, but now they flash on
-Rx/Tx activity.
-
-Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/broadcom.c | 13 +++++++++++++
- include/linux/brcmphy.h    | 16 ++++++++++++++++
- 2 files changed, 29 insertions(+)
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -345,6 +345,19 @@ static int bcm54xx_config_init(struct ph
- 
- 	bcm54xx_phydsp_config(phydev);
- 
-+	/* Encode link speed into LED1 and LED3 pair (green/amber).
-+	 * Also flash these two LEDs on activity. This means configuring
-+	 * them for MULTICOLOR and encoding link/activity into them.
-+	 */
-+	val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
-+		BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
-+	bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
-+
-+	val = BCM_LED_MULTICOLOR_IN_PHASE |
-+		BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
-+		BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
-+	bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
-+
- 	return 0;
- }
- 
---- a/include/linux/brcmphy.h
-+++ b/include/linux/brcmphy.h
-@@ -148,6 +148,22 @@
- #define BCM_LED_SRC_OFF		0xe	/* Tied high */
- #define BCM_LED_SRC_ON		0xf	/* Tied low */
- 
-+/*
-+ * Broadcom Multicolor LED configurations (expansion register 4)
-+ */
-+#define BCM_EXP_MULTICOLOR		(MII_BCM54XX_EXP_SEL_ER + 0x04)
-+#define BCM_LED_MULTICOLOR_IN_PHASE	BIT(8)
-+#define BCM_LED_MULTICOLOR_LINK_ACT	0x0
-+#define BCM_LED_MULTICOLOR_SPEED	0x1
-+#define BCM_LED_MULTICOLOR_ACT_FLASH	0x2
-+#define BCM_LED_MULTICOLOR_FDX		0x3
-+#define BCM_LED_MULTICOLOR_OFF		0x4
-+#define BCM_LED_MULTICOLOR_ON		0x5
-+#define BCM_LED_MULTICOLOR_ALT		0x6
-+#define BCM_LED_MULTICOLOR_FLASH	0x7
-+#define BCM_LED_MULTICOLOR_LINK		0x8
-+#define BCM_LED_MULTICOLOR_ACT		0x9
-+#define BCM_LED_MULTICOLOR_PROGRAM	0xa
- 
- /*
-  * BCM5482: Shadow registers