diff options
author | Álvaro Fernández Rojas <noltari@gmail.com> | 2019-08-02 18:55:55 +0200 |
---|---|---|
committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2019-08-02 18:55:55 +0200 |
commit | 00813d4dd976cc823fa089840ff2f4a10dd6cd0c (patch) | |
tree | 8f2c74a928c9ea0eceb64809d9039db824ae6663 /target/linux/brcm2708/patches-4.14/950-0418-dtoverlays-Correct-DT-handling-camera-GPIOs.patch | |
parent | 19226502bf6393706defe7f049c587b32c9b4f33 (diff) | |
download | upstream-00813d4dd976cc823fa089840ff2f4a10dd6cd0c.tar.gz upstream-00813d4dd976cc823fa089840ff2f4a10dd6cd0c.tar.bz2 upstream-00813d4dd976cc823fa089840ff2f4a10dd6cd0c.zip |
brcm2708: remove linux 4.14 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0418-dtoverlays-Correct-DT-handling-camera-GPIOs.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0418-dtoverlays-Correct-DT-handling-camera-GPIOs.patch | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0418-dtoverlays-Correct-DT-handling-camera-GPIOs.patch b/target/linux/brcm2708/patches-4.14/950-0418-dtoverlays-Correct-DT-handling-camera-GPIOs.patch deleted file mode 100644 index 7f77694882..0000000000 --- a/target/linux/brcm2708/patches-4.14/950-0418-dtoverlays-Correct-DT-handling-camera-GPIOs.patch +++ /dev/null @@ -1,75 +0,0 @@ -From ea59741f2679e30d765b6a9e0d45265e3033a38c Mon Sep 17 00:00:00 2001 -From: Dave Stevenson <dave.stevenson@raspberrypi.org> -Date: Tue, 18 Sep 2018 10:47:38 +0100 -Subject: [PATCH 418/454] dtoverlays: Correct DT handling camera GPIOs - -The firmware has support for updating overrides with the correct -GPIO settings for the camera GPIOs, but the wrong device tree -setup ended up being merged. -Correct the DT configuration so that the firmware does set it -up correctly. - -Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> ---- - arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++ - arch/arm/boot/dts/overlays/README | 10 +--------- - arch/arm/boot/dts/overlays/ov5647-overlay.dts | 12 ++++++++++-- - 3 files changed, 18 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -152,6 +152,13 @@ - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -+ -+ __overrides__ { -+ cam0-pwdn-ctrl; -+ cam0-pwdn; -+ cam0-led-ctrl; -+ cam0-led; -+ }; - }; - - /* Configure and use the auxilliary interrupt controller */ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1283,15 +1283,7 @@ Info: Omnivision OV5647 camera module. - Uses Unicam 1, which is the standard camera connector on most Pi - variants. - Load: dtoverlay=ov5647,<param>=<val> --Params: cam0-pwdn GPIO used to control the sensor powerdown line. -- -- cam0-led GPIO used to control the sensor led -- Both these fields should be automatically filled -- in by the firmware to reflect the default GPIO -- configuration of the particular Pi variant in -- use. -- -- i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - - ---- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts -@@ -78,9 +78,17 @@ - }; - }; - -+ fragment@5 { -+ target-path="/__overrides__"; -+ __overlay__ { -+ cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0"; -+ cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; -+ cam0-led-ctrl = <&ov5647>,"pwdn-gpios:12"; -+ cam0-led = <&ov5647>,"pwdn-gpios:16"; -+ }; -+ }; -+ - __overrides__ { - i2c_pins_28_29 = <0>,"+4-5"; -- cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; -- cam0-led = <&ov5647>,"pwdn-gpios:16"; - }; - }; |