aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.14/950-0351-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch
diff options
context:
space:
mode:
authorStijn Tintel <stijn@linux-ipv6.be>2018-11-10 13:03:18 +0200
committerStijn Tintel <stijn@linux-ipv6.be>2018-12-18 23:19:21 +0200
commitf5919b65d4c671fd5083838c7a445f319f9a13c8 (patch)
tree2c791d2a5dea5bbbb0b85f86f74afce2647c0726 /target/linux/brcm2708/patches-4.14/950-0351-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch
parent822b4c3b250a254e74407056ccfd5c6aa38da162 (diff)
downloadupstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.gz
upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.bz2
upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.zip
brcm2708: add kernel 4.14 support
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0351-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch')
-rw-r--r--target/linux/brcm2708/patches-4.14/950-0351-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch30
1 files changed, 30 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0351-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch b/target/linux/brcm2708/patches-4.14/950-0351-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch
new file mode 100644
index 0000000000..280ef0a8da
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0351-ARM-BCM270X-Add-the-18-bit-DPI-pinmux-to-the-RPI-DTs.patch
@@ -0,0 +1,30 @@
+From e26cf70d54a58a3a1666996374720099ba45ed72 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Fri, 9 Mar 2018 14:24:05 -0800
+Subject: [PATCH 351/454] ARM: BCM270X: Add the 18-bit DPI pinmux to the RPI
+ DTs.
+
+This doesn't do anything by default, but trying to put the node in an
+overlay failed for me.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm270x.dtsi
++++ b/arch/arm/boot/dts/bcm270x.dtsi
+@@ -19,6 +19,13 @@
+
+ gpio@7e200000 { /* gpio */
+ interrupts = <2 17>, <2 18>;
++
++ dpi_18bit_gpio0: dpi_18bit_gpio0 {
++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
++ 12 13 14 15 16 17 18 19
++ 20 21>;
++ brcm,function = <BCM2835_FSEL_ALT2>;
++ };
+ };
+
+ serial@7e201000 { /* uart0 */