brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 98 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0328-media-tc358743-Check-I2C-succeeded-during-probe.patch b/target/linux/brcm2708/patches-4.14/950-0328-media-tc358743-Check-I2C-succeeded-during-probe.patch
new file mode 100644
index 0000000000..87d0966f2b
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0328-media-tc358743-Check-I2C-succeeded-during-probe.patch
@@ -0,0 +1,98 @@
+From bce8f86dec02feb9865a6c72e450a1256b33ae2f Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson@raspberrypi.org>
+Date: Tue, 28 Nov 2017 10:07:29 +0000
+Subject: [PATCH 328/454] media: tc358743: Check I2C succeeded during probe.
+
+The probe for the TC358743 reads the CHIPID register from
+the device and compares it to the expected value of 0.
+If the I2C request fails then that also returns 0, so
+the driver loads thinking that the device is there.
+
+Generally I2C communications are reliable so there is
+limited need to check the return value on every transfer,
+therefore only amend the one read during probe to check
+for I2C errors.
+
+Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
+---
+ drivers/media/i2c/tc358743.c | 27 +++++++++++++++++++++++----
+ 1 file changed, 23 insertions(+), 4 deletions(-)
+
+--- a/drivers/media/i2c/tc358743.c
++++ b/drivers/media/i2c/tc358743.c
+@@ -119,7 +119,7 @@ static inline struct tc358743_state *to_
+ 
+ /* --------------- I2C --------------- */
+ 
+-static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
++static int i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
+ {
+ 	struct tc358743_state *state = to_state(sd);
+ 	struct i2c_client *client = state->i2c_client;
+@@ -145,6 +145,7 @@ static void i2c_rd(struct v4l2_subdev *s
+ 		v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed\n",
+ 				__func__, reg, client->addr);
+ 	}
++	return err != ARRAY_SIZE(msgs);
+ }
+ 
+ static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
+@@ -201,15 +202,24 @@ static void i2c_wr(struct v4l2_subdev *s
+ 	}
+ }
+ 
+-static noinline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n)
++static noinline u32 i2c_rdreg_err(struct v4l2_subdev *sd, u16 reg, u32 n,
++				  int *err)
+ {
++	int error;
+ 	__le32 val = 0;
+ 
+-	i2c_rd(sd, reg, (u8 __force *)&val, n);
++	error = i2c_rd(sd, reg, (u8 __force *)&val, n);
++	if (err)
++		*err = error;
+ 
+ 	return le32_to_cpu(val);
+ }
+ 
++static inline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n)
++{
++	return i2c_rdreg_err(sd, reg, n, NULL);
++}
++
+ static noinline void i2c_wrreg(struct v4l2_subdev *sd, u16 reg, u32 val, u32 n)
+ {
+ 	__le32 raw = cpu_to_le32(val);
+@@ -238,6 +248,13 @@ static u16 i2c_rd16(struct v4l2_subdev *
+ 	return i2c_rdreg(sd, reg, 2);
+ }
+ 
++static int i2c_rd16_err(struct v4l2_subdev *sd, u16 reg, u16 *value)
++{
++	int err;
++	*value = i2c_rdreg_err(sd, reg, 2, &err);
++	return err;
++}
++
+ static void i2c_wr16(struct v4l2_subdev *sd, u16 reg, u16 val)
+ {
+ 	i2c_wrreg(sd, reg, val, 2);
+@@ -1887,6 +1904,7 @@ static int tc358743_probe(struct i2c_cli
+ 	struct tc358743_state *state;
+ 	struct tc358743_platform_data *pdata = client->dev.platform_data;
+ 	struct v4l2_subdev *sd;
++	u16 chipid;
+ 	int err;
+ 
+ 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+@@ -1919,7 +1937,8 @@ static int tc358743_probe(struct i2c_cli
+ 	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+ 
+ 	/* i2c access */
+-	if ((i2c_rd16(sd, CHIPID) & MASK_CHIPID) != 0) {
++	if (i2c_rd16_err(sd, CHIPID, &chipid) ||
++	    (chipid & MASK_CHIPID) != 0) {
+ 		v4l2_info(sd, "not a TC358743 on address 0x%x\n",
+ 			  client->addr << 1);
+ 		return -ENODEV;