brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 59 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0147-dwc_otg-don-t-unconditionally-force-host-mode-in-dwc.patch b/target/linux/brcm2708/patches-4.14/950-0147-dwc_otg-don-t-unconditionally-force-host-mode-in-dwc.patch
new file mode 100644
index 0000000000..9bea4b3639
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0147-dwc_otg-don-t-unconditionally-force-host-mode-in-dwc.patch
@@ -0,0 +1,59 @@
+From 71f116335e08f82f73efec6da10893f545455b5f Mon Sep 17 00:00:00 2001
+From: P33M <p33m@github.com>
+Date: Tue, 9 Jan 2018 15:16:35 +0000
+Subject: [PATCH 147/454] dwc_otg: don't unconditionally force host mode in
+ dwc_otg_cil_init()
+
+Add the ability to disable force_host_mode for those that want to use
+dwc_otg in both device and host modes.
+---
+ drivers/usb/host/dwc_otg/dwc_otg_cil.c    | 7 ++++++-
+ drivers/usb/host/dwc_otg/dwc_otg_driver.c | 7 +++++++
+ 2 files changed, 13 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/host/dwc_otg/dwc_otg_cil.c
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c
+@@ -61,6 +61,8 @@
+ #include "dwc_otg_regs.h"
+ #include "dwc_otg_cil.h"
+ 
++extern bool cil_force_host;
++
+ static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if);
+ 
+ /**
+@@ -192,7 +194,10 @@ dwc_otg_core_if_t *dwc_otg_cil_init(cons
+ 		core_if->hptxfsiz.d32 =
+ 		DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
+ 		gusbcfg.d32 =  DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
+-		gusbcfg.b.force_host_mode = 1;
++		if (cil_force_host)
++			gusbcfg.b.force_host_mode = 1;
++		else
++			gusbcfg.b.force_host_mode = 0;
+ 		DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
+ 		dwc_mdelay(100);
+ 	}
+--- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c
++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
+@@ -247,6 +247,9 @@ bool fiq_fsm_enable = true;
+ //Bulk split-transaction NAK holdoff in microframes
+ uint16_t nak_holdoff = 8;
+ 
++//Force host mode during CIL re-init
++bool cil_force_host = true;
++
+ unsigned short fiq_fsm_mask = 0x0F;
+ 
+ unsigned short int_ep_interval_min = 0;
+@@ -1403,6 +1406,10 @@ MODULE_PARM_DESC(int_ep_interval_min, "C
+ 					"0..1 = Use endpoint default\n"
+ 					"2..n = Minimum interval n microframes. Use powers of 2.\n");
+ 
++module_param(cil_force_host, bool, 0644);
++MODULE_PARM_DESC(cil_force_host, "On a connector-ID status change, "
++					"force Host Mode regardless of OTG state.");
++
+ /** @page "Module Parameters"
+  *
+  * The following parameters may be specified when starting the module.