brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 32 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0101-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch b/target/linux/brcm2708/patches-4.14/950-0101-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch
new file mode 100644
index 0000000000..9d5aca9486
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0101-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch
@@ -0,0 +1,32 @@
+From e490dd44e4f57da93ef4c42c76dbbbd4fd3124d2 Mon Sep 17 00:00:00 2001
+From: Electron752 <mzoran@crowfest.net>
+Date: Sat, 14 Jan 2017 02:54:26 -0800
+Subject: [PATCH 101/454] ARM64: Enable Kernel Address Space Randomization
+ (#1792)
+
+Randomization allows the mapping between virtual addresses and physical
+address to be different on each boot.  This makes it more difficult
+to exploit security vulnerabilities that require knowledge of fixed
+hardware addresses.
+
+The firmware generates a 8 byte random number during bootup and stores
+it in the device tree under chosen/kaslr-seed. This number is used
+to randomize the address mapping.
+
+This change enables this feature in the build configuration for ARM64.
+
+Signed-off-by: Michael Zoran <mzoran@crowfest.net>
+---
+ arch/arm64/configs/bcmrpi3_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/configs/bcmrpi3_defconfig
++++ b/arch/arm64/configs/bcmrpi3_defconfig
+@@ -53,6 +53,7 @@ CONFIG_ARMV8_DEPRECATED=y
+ CONFIG_SWP_EMULATION=y
+ CONFIG_CP15_BARRIER_EMULATION=y
+ CONFIG_SETEND_EMULATION=y
++CONFIG_RANDOMIZE_BASE=y
+ CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+ CONFIG_BINFMT_MISC=y
+ CONFIG_COMPAT=y