brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 38 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0029-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.14/950-0029-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
new file mode 100644
index 0000000000..a1150161fd
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0029-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
@@ -0,0 +1,38 @@
+From 08accfd44328954d33c264402730c1944f1c70fc Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Mon, 9 May 2016 17:28:18 -0700
+Subject: [PATCH 029/454] clk: bcm2835: Mark GPIO clocks enabled at boot as
+ critical.
+
+These divide off of PLLD_PER and are used for the ethernet and wifi
+PHYs source PLLs.  Neither of them is currently represented by a phy
+device that would grab the clock for us.
+
+This keeps other drivers from killing the networking PHYs when they
+disable their own clocks and trigger PLLD_PER's refcount going to 0.
+
+v2: Skip marking as critical if they aren't on at boot.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1490,6 +1490,15 @@ static struct clk_hw *bcm2835_register_c
+ 	init.flags = data->flags | CLK_IGNORE_UNUSED;
+ 
+ 	/*
++	 * Some GPIO clocks for ethernet/wifi PLLs are marked as
++	 * critical (since some platforms use them), but if the
++	 * firmware didn't have them turned on then they clearly
++	 * aren't actually critical.
++	 */
++	if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0)
++		init.flags &= ~CLK_IS_CRITICAL;
++
++	/*
+ 	 * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate
+ 	 * rate changes on at least of the parents.
+ 	 */