aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2015-09-11 17:17:30 +0000
committerFelix Fietkau <nbd@openwrt.org>2015-09-11 17:17:30 +0000
commite1f0a7e841750fe8e47b4755fb5f849bcda2b50d (patch)
tree9825ebb26da47de4138e7e83d7979976846f18b5 /target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
parent6c1adb3eecff7e86f7396e1aa443ee1ce947d9ec (diff)
downloadupstream-e1f0a7e841750fe8e47b4755fb5f849bcda2b50d.tar.gz
upstream-e1f0a7e841750fe8e47b4755fb5f849bcda2b50d.tar.bz2
upstream-e1f0a7e841750fe8e47b4755fb5f849bcda2b50d.zip
brcm2708: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46870
Diffstat (limited to 'target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch')
-rw-r--r--target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch1329
1 files changed, 0 insertions, 1329 deletions
diff --git a/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch b/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
deleted file mode 100644
index 7795597451..0000000000
--- a/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
+++ /dev/null
@@ -1,1329 +0,0 @@
-From 66ea263246ca6dd9f63dce8fb22157fa83693300 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Mon, 4 Nov 2013 18:56:10 +0000
-Subject: [PATCH 019/114] Add Chris Boot's i2c and spi drivers.
-
-i2c-bcm2708: fixed baudrate
-
-Fixed issue where the wrong CDIV value was set for baudrates below 3815 Hz (for 250MHz bus clock).
-In that case the computed CDIV value was more than 0xffff. However the CDIV register width is only 16 bits.
-This resulted in incorrect setting of CDIV and higher baudrate than intended.
-Example: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0x1704 -> 42430Hz
-After correction: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0xffff -> 3815Hz
-The correct baudrate is shown in the log after the cdiv > 0xffff correction.
----
- arch/arm/configs/bcmrpi_defconfig | 7 +
- arch/arm/mach-bcm2708/Kconfig | 7 +
- arch/arm/mach-bcm2708/bcm2708.c | 104 ++++++-
- drivers/i2c/busses/Kconfig | 19 ++
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-bcm2708.c | 420 +++++++++++++++++++++++++
- drivers/spi/Kconfig | 8 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-bcm2708.c | 626 ++++++++++++++++++++++++++++++++++++++
- 9 files changed, 1191 insertions(+), 2 deletions(-)
- create mode 100644 drivers/i2c/busses/i2c-bcm2708.c
- create mode 100644 drivers/spi/spi-bcm2708.c
-
---- a/arch/arm/configs/bcmrpi_defconfig
-+++ b/arch/arm/configs/bcmrpi_defconfig
-@@ -195,6 +195,13 @@ CONFIG_SERIAL_AMBA_PL011=y
- CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
- # CONFIG_HW_RANDOM is not set
- CONFIG_RAW_DRIVER=y
-+CONFIG_I2C=y
-+CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_BCM2708=m
-+CONFIG_SPI=y
-+CONFIG_SPI_BCM2708=m
-+CONFIG_SPI_SPIDEV=m
-+CONFIG_GPIO_SYSFS=y
- # CONFIG_HWMON is not set
- CONFIG_WATCHDOG=y
- CONFIG_FB=y
---- a/arch/arm/mach-bcm2708/Kconfig
-+++ b/arch/arm/mach-bcm2708/Kconfig
-@@ -31,4 +31,11 @@ config BCM2708_NOL2CACHE
- help
- Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt.
-
-+config BCM2708_SPIDEV
-+ bool "Bind spidev to SPI0 master"
-+ depends on MACH_BCM2708
-+ depends on SPI
-+ default y
-+ help
-+ Binds spidev driver to the SPI0 master
- endmenu
---- a/arch/arm/mach-bcm2708/bcm2708.c
-+++ b/arch/arm/mach-bcm2708/bcm2708.c
-@@ -31,6 +31,7 @@
- #include <linux/cnt32_to_63.h>
- #include <linux/io.h>
- #include <linux/module.h>
-+#include <linux/spi/spi.h>
-
- #include <linux/version.h>
- #include <linux/clkdev.h>
-@@ -205,7 +206,6 @@ static struct clk osc_clk = {
-
- /* warning - the USB needs a clock > 34MHz */
-
--#ifdef CONFIG_MMC_BCM2708
- static struct clk sdhost_clk = {
- #ifdef CONFIG_ARCH_BCM2708_CHIPIT
- .rate = 4000000, /* 4MHz */
-@@ -213,7 +213,6 @@ static struct clk sdhost_clk = {
- .rate = 250000000, /* 250MHz */
- #endif
- };
--#endif
-
- static struct clk_lookup lookups[] = {
- { /* UART0 */
-@@ -223,6 +222,15 @@ static struct clk_lookup lookups[] = {
- { /* USB */
- .dev_id = "bcm2708_usb",
- .clk = &osc_clk,
-+ }, { /* SPI */
-+ .dev_id = "bcm2708_spi.0",
-+ .clk = &sdhost_clk,
-+ }, { /* BSC0 */
-+ .dev_id = "bcm2708_i2c.0",
-+ .clk = &sdhost_clk,
-+ }, { /* BSC1 */
-+ .dev_id = "bcm2708_i2c.1",
-+ .clk = &sdhost_clk,
- }
- };
-
-@@ -455,6 +463,89 @@ static struct platform_device bcm2708_al
- },
- };
-
-+static struct resource bcm2708_spi_resources[] = {
-+ {
-+ .start = SPI0_BASE,
-+ .end = SPI0_BASE + SZ_256 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = IRQ_SPI,
-+ .end = IRQ_SPI,
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+
-+static u64 bcm2708_spi_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
-+static struct platform_device bcm2708_spi_device = {
-+ .name = "bcm2708_spi",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(bcm2708_spi_resources),
-+ .resource = bcm2708_spi_resources,
-+ .dev = {
-+ .dma_mask = &bcm2708_spi_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON)},
-+};
-+
-+#ifdef CONFIG_BCM2708_SPIDEV
-+static struct spi_board_info bcm2708_spi_devices[] = {
-+#ifdef CONFIG_SPI_SPIDEV
-+ {
-+ .modalias = "spidev",
-+ .max_speed_hz = 500000,
-+ .bus_num = 0,
-+ .chip_select = 0,
-+ .mode = SPI_MODE_0,
-+ }, {
-+ .modalias = "spidev",
-+ .max_speed_hz = 500000,
-+ .bus_num = 0,
-+ .chip_select = 1,
-+ .mode = SPI_MODE_0,
-+ }
-+#endif
-+};
-+#endif
-+
-+static struct resource bcm2708_bsc0_resources[] = {
-+ {
-+ .start = BSC0_BASE,
-+ .end = BSC0_BASE + SZ_256 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = INTERRUPT_I2C,
-+ .end = INTERRUPT_I2C,
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device bcm2708_bsc0_device = {
-+ .name = "bcm2708_i2c",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(bcm2708_bsc0_resources),
-+ .resource = bcm2708_bsc0_resources,
-+};
-+
-+
-+static struct resource bcm2708_bsc1_resources[] = {
-+ {
-+ .start = BSC1_BASE,
-+ .end = BSC1_BASE + SZ_256 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = INTERRUPT_I2C,
-+ .end = INTERRUPT_I2C,
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device bcm2708_bsc1_device = {
-+ .name = "bcm2708_i2c",
-+ .id = 1,
-+ .num_resources = ARRAY_SIZE(bcm2708_bsc1_resources),
-+ .resource = bcm2708_bsc1_resources,
-+};
-+
- static struct platform_device bcm2835_hwmon_device = {
- .name = "bcm2835_hwmon",
- };
-@@ -571,6 +662,10 @@ void __init bcm2708_init(void)
- for (i = 0; i < ARRAY_SIZE(bcm2708_alsa_devices); i++)
- bcm_register_device(&bcm2708_alsa_devices[i]);
-
-+ bcm_register_device(&bcm2708_spi_device);
-+ bcm_register_device(&bcm2708_bsc0_device);
-+ bcm_register_device(&bcm2708_bsc1_device);
-+
- bcm_register_device(&bcm2835_hwmon_device);
- bcm_register_device(&bcm2835_thermal_device);
-
-@@ -580,6 +675,11 @@ void __init bcm2708_init(void)
- }
- system_rev = boardrev;
- system_serial_low = serial;
-+
-+#ifdef CONFIG_BCM2708_SPIDEV
-+ spi_register_board_info(bcm2708_spi_devices,
-+ ARRAY_SIZE(bcm2708_spi_devices));
-+#endif
- }
-
- static void timer_set_mode(enum clock_event_mode mode,
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -372,6 +372,25 @@ config I2C_BCM2835
- This support is also available as a module. If so, the module
- will be called i2c-bcm2835.
-
-+config I2C_BCM2708
-+ tristate "BCM2708 BSC"
-+ depends on MACH_BCM2708
-+ help
-+ Enabling this option will add BSC (Broadcom Serial Controller)
-+ support for the BCM2708. BSC is a Broadcom proprietary bus compatible
-+ with I2C/TWI/SMBus.
-+
-+config I2C_BCM2708_BAUDRATE
-+ prompt "BCM2708 I2C baudrate"
-+ depends on I2C_BCM2708
-+ int
-+ default 100000
-+ help
-+ Set the I2C baudrate. This will alter the default value. A
-+ different baudrate can be set by using a module parameter as well. If
-+ no parameter is provided when loading, this is the value that will be
-+ used.
-+
- config I2C_BCM_KONA
- tristate "BCM Kona I2C adapter"
- depends on ARCH_BCM_MOBILE
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_I2C_AT91) += i2c-at91.o
- obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
- obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
- obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
-+obj-$(CONFIG_I2C_BCM2708) += i2c-bcm2708.o
- obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
- obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
- obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-bcm2708.c
-@@ -0,0 +1,420 @@
-+/*
-+ * Driver for Broadcom BCM2708 BSC Controllers
-+ *
-+ * Copyright (C) 2012 Chris Boot & Frank Buss
-+ *
-+ * This driver is inspired by:
-+ * i2c-ocores.c, by Peter Korsgaard <jacmet@sunsite.dk>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+
-+/* BSC register offsets */
-+#define BSC_C 0x00
-+#define BSC_S 0x04
-+#define BSC_DLEN 0x08
-+#define BSC_A 0x0c
-+#define BSC_FIFO 0x10
-+#define BSC_DIV 0x14
-+#define BSC_DEL 0x18
-+#define BSC_CLKT 0x1c
-+
-+/* Bitfields in BSC_C */
-+#define BSC_C_I2CEN 0x00008000
-+#define BSC_C_INTR 0x00000400
-+#define BSC_C_INTT 0x00000200
-+#define BSC_C_INTD 0x00000100
-+#define BSC_C_ST 0x00000080
-+#define BSC_C_CLEAR_1 0x00000020
-+#define BSC_C_CLEAR_2 0x00000010
-+#define BSC_C_READ 0x00000001
-+
-+/* Bitfields in BSC_S */
-+#define BSC_S_CLKT 0x00000200
-+#define BSC_S_ERR 0x00000100
-+#define BSC_S_RXF 0x00000080
-+#define BSC_S_TXE 0x00000040
-+#define BSC_S_RXD 0x00000020
-+#define BSC_S_TXD 0x00000010
-+#define BSC_S_RXR 0x00000008
-+#define BSC_S_TXW 0x00000004
-+#define BSC_S_DONE 0x00000002
-+#define BSC_S_TA 0x00000001
-+
-+#define I2C_TIMEOUT_MS 150
-+
-+#define DRV_NAME "bcm2708_i2c"
-+
-+static unsigned int baudrate = CONFIG_I2C_BCM2708_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The I2C baudrate");
-+
-+
-+struct bcm2708_i2c {
-+ struct i2c_adapter adapter;
-+
-+ spinlock_t lock;
-+ void __iomem *base;
-+ int irq;
-+ struct clk *clk;
-+
-+ struct completion done;
-+
-+ struct i2c_msg *msg;
-+ int pos;
-+ int nmsgs;
-+ bool error;
-+};
-+
-+/*
-+ * This function sets the ALT mode on the I2C pins so that we can use them with
-+ * the BSC hardware.
-+ *
-+ * FIXME: This is a hack. Use pinmux / pinctrl.
-+ */
-+static void bcm2708_i2c_init_pinmode(int id)
-+{
-+#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
-+#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
-+
-+ int pin;
-+ u32 *gpio = ioremap(GPIO_BASE, SZ_16K);
-+
-+ BUG_ON(id != 0 && id != 1);
-+ /* BSC0 is on GPIO 0 & 1, BSC1 is on GPIO 2 & 3 */
-+ for (pin = id*2+0; pin <= id*2+1; pin++) {
-+printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
-+ INP_GPIO(pin); /* set mode to GPIO input first */
-+ SET_GPIO_ALT(pin, 0); /* set mode to ALT 0 */
-+ }
-+
-+ iounmap(gpio);
-+
-+#undef INP_GPIO
-+#undef SET_GPIO_ALT
-+}
-+
-+static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg)
-+{
-+ return readl(bi->base + reg);
-+}
-+
-+static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val)
-+{
-+ writel(val, bi->base + reg);
-+}
-+
-+static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi)
-+{
-+ bcm2708_wr(bi, BSC_C, 0);
-+ bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE);
-+}
-+
-+static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi)
-+{
-+ while ((bcm2708_rd(bi, BSC_S) & BSC_S_RXD) && (bi->pos < bi->msg->len))
-+ bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO);
-+}
-+
-+static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
-+{
-+ while ((bcm2708_rd(bi, BSC_S) & BSC_S_TXD) && (bi->pos < bi->msg->len))
-+ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
-+}
-+
-+static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
-+{
-+ unsigned long bus_hz;
-+ u32 cdiv;
-+ u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
-+
-+ bus_hz = clk_get_rate(bi->clk);
-+ cdiv = bus_hz / baudrate;
-+ if (cdiv > 0xffff)
-+ cdiv = 0xffff;
-+
-+ if (bi->msg->flags & I2C_M_RD)
-+ c |= BSC_C_INTR | BSC_C_READ;
-+ else
-+ c |= BSC_C_INTT;
-+
-+ bcm2708_wr(bi, BSC_DIV, cdiv);
-+ bcm2708_wr(bi, BSC_A, bi->msg->addr);
-+ bcm2708_wr(bi, BSC_DLEN, bi->msg->len);
-+ bcm2708_wr(bi, BSC_C, c);
-+}
-+
-+static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
-+{
-+ struct bcm2708_i2c *bi = dev_id;
-+ bool handled = true;
-+ u32 s;
-+
-+ spin_lock(&bi->lock);
-+
-+ /* we may see camera interrupts on the "other" I2C channel
-+ Just return if we've not sent anything */
-+ if (!bi->nmsgs || !bi->msg )
-+ goto early_exit;
-+
-+ s = bcm2708_rd(bi, BSC_S);
-+
-+ if (s & (BSC_S_CLKT | BSC_S_ERR)) {
-+ bcm2708_bsc_reset(bi);
-+ bi->error = true;
-+
-+ /* wake up our bh */
-+ complete(&bi->done);
-+ } else if (s & BSC_S_DONE) {
-+ bi->nmsgs--;
-+
-+ if (bi->msg->flags & I2C_M_RD)
-+ bcm2708_bsc_fifo_drain(bi);
-+
-+ bcm2708_bsc_reset(bi);
-+
-+ if (bi->nmsgs) {
-+ /* advance to next message */
-+ bi->msg++;
-+ bi->pos = 0;
-+ bcm2708_bsc_setup(bi);
-+ } else {
-+ /* wake up our bh */
-+ complete(&bi->done);
-+ }
-+ } else if (s & BSC_S_TXW) {
-+ bcm2708_bsc_fifo_fill(bi);
-+ } else if (s & BSC_S_RXR) {
-+ bcm2708_bsc_fifo_drain(bi);
-+ } else {
-+ handled = false;
-+ }
-+
-+early_exit:
-+ spin_unlock(&bi->lock);
-+
-+ return handled ? IRQ_HANDLED : IRQ_NONE;
-+}
-+
-+static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap,
-+ struct i2c_msg *msgs, int num)
-+{
-+ struct bcm2708_i2c *bi = adap->algo_data;
-+ unsigned long flags;
-+ int ret;
-+
-+ spin_lock_irqsave(&bi->lock, flags);
-+
-+ reinit_completion(&bi->done);
-+ bi->msg = msgs;
-+ bi->pos = 0;
-+ bi->nmsgs = num;
-+ bi->error = false;
-+
-+ bcm2708_bsc_setup(bi);
-+
-+ /* unlockig _after_ the setup to avoid races with the interrupt routine */
-+ spin_unlock_irqrestore(&bi->lock, flags);
-+
-+ ret = wait_for_completion_timeout(&bi->done,
-+ msecs_to_jiffies(I2C_TIMEOUT_MS));
-+ if (ret == 0) {
-+ dev_err(&adap->dev, "transfer timed out\n");
-+ spin_lock_irqsave(&bi->lock, flags);
-+ bcm2708_bsc_reset(bi);
-+ spin_unlock_irqrestore(&bi->lock, flags);
-+ return -ETIMEDOUT;
-+ }
-+
-+ return bi->error ? -EIO : num;
-+}
-+
-+static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap)
-+{
-+ return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm bcm2708_i2c_algorithm = {
-+ .master_xfer = bcm2708_i2c_master_xfer,
-+ .functionality = bcm2708_i2c_functionality,
-+};
-+
-+static int bcm2708_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ int irq, err = -ENOMEM;
-+ struct clk *clk;
-+ struct bcm2708_i2c *bi;
-+ struct i2c_adapter *adap;
-+ unsigned long bus_hz;
-+ u32 cdiv;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "could not get IO memory\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "could not get IRQ\n");
-+ return irq;
-+ }
-+
-+ clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk));
-+ return PTR_ERR(clk);
-+ }
-+
-+ bcm2708_i2c_init_pinmode(pdev->id);
-+
-+ bi = kzalloc(sizeof(*bi), GFP_KERNEL);
-+ if (!bi)
-+ goto out_clk_put;
-+
-+ platform_set_drvdata(pdev, bi);
-+
-+ adap = &bi->adapter;
-+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC;
-+ adap->algo = &bcm2708_i2c_algorithm;
-+ adap->algo_data = bi;
-+ adap->dev.parent = &pdev->dev;
-+ adap->nr = pdev->id;
-+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
-+
-+ switch (pdev->id) {
-+ case 0:
-+ adap->class = I2C_CLASS_HWMON;
-+ break;
-+ case 1:
-+ adap->class = I2C_CLASS_DDC;
-+ break;
-+ default:
-+ dev_err(&pdev->dev, "can only bind to BSC 0 or 1\n");
-+ err = -ENXIO;
-+ goto out_free_bi;
-+ }
-+
-+ spin_lock_init(&bi->lock);
-+ init_completion(&bi->done);
-+
-+ bi->base = ioremap(regs->start, resource_size(regs));
-+ if (!bi->base) {
-+ dev_err(&pdev->dev, "could not remap memory\n");
-+ goto out_free_bi;
-+ }
-+
-+ bi->irq = irq;
-+ bi->clk = clk;
-+
-+ err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED,
-+ dev_name(&pdev->dev), bi);
-+ if (err) {
-+ dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
-+ goto out_iounmap;
-+ }
-+
-+ bcm2708_bsc_reset(bi);
-+
-+ err = i2c_add_numbered_adapter(adap);
-+ if (err < 0) {
-+ dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err);
-+ goto out_free_irq;
-+ }
-+
-+ bus_hz = clk_get_rate(bi->clk);
-+ cdiv = bus_hz / baudrate;
-+ if (cdiv > 0xffff) {
-+ cdiv = 0xffff;
-+ baudrate = bus_hz / cdiv;
-+ }
-+
-+ dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %d)\n",
-+ pdev->id, (unsigned long)regs->start, irq, baudrate);
-+
-+ return 0;
-+
-+out_free_irq:
-+ free_irq(bi->irq, bi);
-+out_iounmap:
-+ iounmap(bi->base);
-+out_free_bi:
-+ kfree(bi);
-+out_clk_put:
-+ clk_put(clk);
-+ return err;
-+}
-+
-+static int bcm2708_i2c_remove(struct platform_device *pdev)
-+{
-+ struct bcm2708_i2c *bi = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ i2c_del_adapter(&bi->adapter);
-+ free_irq(bi->irq, bi);
-+ iounmap(bi->base);
-+ clk_disable(bi->clk);
-+ clk_put(bi->clk);
-+ kfree(bi);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver bcm2708_i2c_driver = {
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = bcm2708_i2c_probe,
-+ .remove = bcm2708_i2c_remove,
-+};
-+
-+// module_platform_driver(bcm2708_i2c_driver);
-+
-+
-+static int __init bcm2708_i2c_init(void)
-+{
-+ return platform_driver_register(&bcm2708_i2c_driver);
-+}
-+
-+static void __exit bcm2708_i2c_exit(void)
-+{
-+ platform_driver_unregister(&bcm2708_i2c_driver);
-+}
-+
-+module_init(bcm2708_i2c_init);
-+module_exit(bcm2708_i2c_exit);
-+
-+
-+
-+MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708");
-+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" DRV_NAME);
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -86,6 +86,14 @@ config SPI_BCM2835
- is for the regular SPI controller. Slave mode operation is not also
- not supported.
-
-+config SPI_BCM2708
-+ tristate "BCM2708 SPI controller driver (SPI0)"
-+ depends on MACH_BCM2708
-+ help
-+ This selects a driver for the Broadcom BCM2708 SPI master (SPI0). This
-+ driver is not compatible with the "Universal SPI Master" or the SPI slave
-+ device.
-+
- config SPI_BFIN5XX
- tristate "SPI controller driver for ADI Blackfin5xx"
- depends on BLACKFIN && !BF60x
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63x
- obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
- obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
- obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
-+obj-$(CONFIG_SPI_BCM2708) += spi-bcm2708.o
- obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
- obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
- obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm2708.c
-@@ -0,0 +1,626 @@
-+/*
-+ * Driver for Broadcom BCM2708 SPI Controllers
-+ *
-+ * Copyright (C) 2012 Chris Boot
-+ *
-+ * This driver is inspired by:
-+ * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * spi-atmel.c, Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/spi/spi.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/log2.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+
-+/* SPI register offsets */
-+#define SPI_CS 0x00
-+#define SPI_FIFO 0x04
-+#define SPI_CLK 0x08
-+#define SPI_DLEN 0x0c
-+#define SPI_LTOH 0x10
-+#define SPI_DC 0x14
-+
-+/* Bitfields in CS */
-+#define SPI_CS_LEN_LONG 0x02000000
-+#define SPI_CS_DMA_LEN 0x01000000
-+#define SPI_CS_CSPOL2 0x00800000
-+#define SPI_CS_CSPOL1 0x00400000
-+#define SPI_CS_CSPOL0 0x00200000
-+#define SPI_CS_RXF 0x00100000
-+#define SPI_CS_RXR 0x00080000
-+#define SPI_CS_TXD 0x00040000
-+#define SPI_CS_RXD 0x00020000
-+#define SPI_CS_DONE 0x00010000
-+#define SPI_CS_LEN 0x00002000
-+#define SPI_CS_REN 0x00001000
-+#define SPI_CS_ADCS 0x00000800
-+#define SPI_CS_INTR 0x00000400
-+#define SPI_CS_INTD 0x00000200
-+#define SPI_CS_DMAEN 0x00000100
-+#define SPI_CS_TA 0x00000080
-+#define SPI_CS_CSPOL 0x00000040
-+#define SPI_CS_CLEAR_RX 0x00000020
-+#define SPI_CS_CLEAR_TX 0x00000010
-+#define SPI_CS_CPOL 0x00000008
-+#define SPI_CS_CPHA 0x00000004
-+#define SPI_CS_CS_10 0x00000002
-+#define SPI_CS_CS_01 0x00000001
-+
-+#define SPI_TIMEOUT_MS 150
-+
-+#define DRV_NAME "bcm2708_spi"
-+
-+struct bcm2708_spi {
-+ spinlock_t lock;
-+ void __iomem *base;
-+ int irq;
-+ struct clk *clk;
-+ bool stopping;
-+
-+ struct list_head queue;
-+ struct workqueue_struct *workq;
-+ struct work_struct work;
-+ struct completion done;
-+
-+ const u8 *tx_buf;
-+ u8 *rx_buf;
-+ int len;
-+};
-+
-+struct bcm2708_spi_state {
-+ u32 cs;
-+ u16 cdiv;
-+};
-+
-+/*
-+ * This function sets the ALT mode on the SPI pins so that we can use them with
-+ * the SPI hardware.
-+ *
-+ * FIXME: This is a hack. Use pinmux / pinctrl.
-+ */
-+static void bcm2708_init_pinmode(void)
-+{
-+#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
-+#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
-+
-+ int pin;
-+ u32 *gpio = ioremap(GPIO_BASE, SZ_16K);
-+
-+ /* SPI is on GPIO 7..11 */
-+ for (pin = 7; pin <= 11; pin++) {
-+ INP_GPIO(pin); /* set mode to GPIO input first */
-+ SET_GPIO_ALT(pin, 0); /* set mode to ALT 0 */
-+ }
-+
-+ iounmap(gpio);
-+
-+#undef INP_GPIO
-+#undef SET_GPIO_ALT
-+}
-+
-+static inline u32 bcm2708_rd(struct bcm2708_spi *bs, unsigned reg)
-+{
-+ return readl(bs->base + reg);
-+}
-+
-+static inline void bcm2708_wr(struct bcm2708_spi *bs, unsigned reg, u32 val)
-+{
-+ writel(val, bs->base + reg);
-+}
-+
-+static inline void bcm2708_rd_fifo(struct bcm2708_spi *bs, int len)
-+{
-+ u8 byte;
-+
-+ while (len--) {
-+ byte = bcm2708_rd(bs, SPI_FIFO);
-+ if (bs->rx_buf)
-+ *bs->rx_buf++ = byte;
-+ }
-+}
-+
-+static inline void bcm2708_wr_fifo(struct bcm2708_spi *bs, int len)
-+{
-+ u8 byte;
-+ u16 val;
-+
-+ if (len > bs->len)
-+ len = bs->len;
-+
-+ if (unlikely(bcm2708_rd(bs, SPI_CS) & SPI_CS_LEN)) {
-+ /* LoSSI mode */
-+ if (unlikely(len % 2)) {
-+ printk(KERN_ERR"bcm2708_wr_fifo: length must be even, skipping.\n");
-+ bs->len = 0;
-+ return;
-+ }
-+ while (len) {
-+ if (bs->tx_buf) {
-+ val = *(const u16 *)bs->tx_buf;
-+ bs->tx_buf += 2;
-+ } else
-+ val = 0;
-+ bcm2708_wr(bs, SPI_FIFO, val);
-+ bs->len -= 2;
-+ len -= 2;
-+ }
-+ return;
-+ }
-+
-+ while (len--) {
-+ byte = bs->tx_buf ? *bs->tx_buf++ : 0;
-+ bcm2708_wr(bs, SPI_FIFO, byte);
-+ bs->len--;
-+ }
-+}
-+
-+static irqreturn_t bcm2708_spi_interrupt(int irq, void *dev_id)
-+{
-+ struct spi_master *master = dev_id;
-+ struct bcm2708_spi *bs = spi_master_get_devdata(master);
-+ u32 cs;
-+
-+ spin_lock(&bs->lock);
-+
-+ cs = bcm2708_rd(bs, SPI_CS);
-+
-+ if (cs & SPI_CS_DONE) {
-+ if (bs->len) { /* first interrupt in a transfer */
-+ /* fill the TX fifo with up to 16 bytes */
-+ bcm2708_wr_fifo(bs, 16);
-+ } else { /* transfer complete */
-+ /* disable interrupts */
-+ cs &= ~(SPI_CS_INTR | SPI_CS_INTD);
-+ bcm2708_wr(bs, SPI_CS, cs);
-+
-+ /* drain RX FIFO */
-+ while (cs & SPI_CS_RXD) {
-+ bcm2708_rd_fifo(bs, 1);
-+ cs = bcm2708_rd(bs, SPI_CS);
-+ }
-+
-+ /* wake up our bh */
-+ complete(&bs->done);
-+ }
-+ } else if (cs & SPI_CS_RXR) {
-+ /* read 12 bytes of data */
-+ bcm2708_rd_fifo(bs, 12);
-+
-+ /* write up to 12 bytes */
-+ bcm2708_wr_fifo(bs, 12);
-+ }
-+
-+ spin_unlock(&bs->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int bcm2708_setup_state(struct spi_master *master,
-+ struct device *dev, struct bcm2708_spi_state *state,
-+ u32 hz, u8 csel, u8 mode, u8 bpw)
-+{
-+ struct bcm2708_spi *bs = spi_master_get_devdata(master);
-+ int cdiv;
-+ unsigned long bus_hz;
-+ u32 cs = 0;
-+
-+ bus_hz = clk_get_rate(bs->clk);
-+
-+ if (hz >= bus_hz) {
-+ cdiv = 2; /* bus_hz / 2 is as fast as we can go */
-+ } else if (hz) {
-+ cdiv = DIV_ROUND_UP(bus_hz, hz);
-+
-+ /* CDIV must be a power of 2, so round up */
-+ cdiv = roundup_pow_of_two(cdiv);
-+
-+ if (cdiv > 65536) {
-+ dev_dbg(dev,
-+ "setup: %d Hz too slow, cdiv %u; min %ld Hz\n",
-+ hz, cdiv, bus_hz / 65536);
-+ return -EINVAL;
-+ } else if (cdiv == 65536) {
-+ cdiv = 0;
-+ } else if (cdiv == 1) {
-+ cdiv = 2; /* 1 gets rounded down to 0; == 65536 */
-+ }
-+ } else {
-+ cdiv = 0;
-+ }
-+
-+ switch (bpw) {
-+ case 8:
-+ break;
-+ case 9:
-+ /* Reading in LoSSI mode is a special case. See 'BCM2835 ARM Peripherals' datasheet */
-+ cs |= SPI_CS_LEN;
-+ break;
-+ default:
-+ dev_dbg(dev, "setup: invalid bits_per_word %u (must be 8 or 9)\n",
-+ bpw);
-+ return -EINVAL;
-+ }
-+
-+ if (mode & SPI_CPOL)
-+ cs |= SPI_CS_CPOL;
-+ if (mode & SPI_CPHA)
-+ cs |= SPI_CS_CPHA;
-+
-+ if (!(mode & SPI_NO_CS)) {
-+ if (mode & SPI_CS_HIGH) {
-+ cs |= SPI_CS_CSPOL;
-+ cs |= SPI_CS_CSPOL0 << csel;
-+ }
-+
-+ cs |= csel;
-+ } else {
-+ cs |= SPI_CS_CS_10 | SPI_CS_CS_01;
-+ }
-+
-+ if (state) {
-+ state->cs = cs;
-+ state->cdiv = cdiv;
-+ dev_dbg(dev, "setup: want %d Hz; "
-+ "bus_hz=%lu / cdiv=%u == %lu Hz; "
-+ "mode %u: cs 0x%08X\n",
-+ hz, bus_hz, cdiv, bus_hz/cdiv, mode, cs);
-+ }
-+
-+ return 0;
-+}
-+
-+static int bcm2708_process_transfer(struct bcm2708_spi *bs,
-+ struct spi_message *msg, struct spi_transfer *xfer)
-+{
-+ struct spi_device *spi = msg->spi;
-+ struct bcm2708_spi_state state, *stp;
-+ int ret;
-+ u32 cs;
-+
-+ if (bs->stopping)
-+ return -ESHUTDOWN;
-+
-+ if (xfer->bits_per_word || xfer->speed_hz) {
-+ ret = bcm2708_setup_state(spi->master, &spi->dev, &state,
-+ xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz,
-+ spi->chip_select, spi->mode,
-+ xfer->bits_per_word ? xfer->bits_per_word :
-+ spi->bits_per_word);
-+ if (ret)
-+ return ret;
-+
-+ stp = &state;
-+ } else {
-+ stp = spi->controller_state;
-+ }
-+
-+ reinit_completion(&bs->done);
-+ bs->tx_buf = xfer->tx_buf;
-+ bs->rx_buf = xfer->rx_buf;
-+ bs->len = xfer->len;
-+
-+ cs = stp->cs | SPI_CS_INTR | SPI_CS_INTD | SPI_CS_TA;
-+
-+ bcm2708_wr(bs, SPI_CLK, stp->cdiv);
-+ bcm2708_wr(bs, SPI_CS, cs);
-+
-+ ret = wait_for_completion_timeout(&bs->done,
-+ msecs_to_jiffies(SPI_TIMEOUT_MS));
-+ if (ret == 0) {
-+ dev_err(&spi->dev, "transfer timed out\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ if (xfer->delay_usecs)
-+ udelay(xfer->delay_usecs);
-+
-+ if (list_is_last(&xfer->transfer_list, &msg->transfers) ||
-+ xfer->cs_change) {
-+ /* clear TA and interrupt flags */
-+ bcm2708_wr(bs, SPI_CS, stp->cs);
-+ }
-+
-+ msg->actual_length += (xfer->len - bs->len);
-+
-+ return 0;
-+}
-+
-+static void bcm2708_work(struct work_struct *work)
-+{
-+ struct bcm2708_spi *bs = container_of(work, struct bcm2708_spi, work);
-+ unsigned long flags;
-+ struct spi_message *msg;
-+ struct spi_transfer *xfer;
-+ int status = 0;
-+
-+ spin_lock_irqsave(&bs->lock, flags);
-+ while (!list_empty(&bs->queue)) {
-+ msg = list_first_entry(&bs->queue, struct spi_message, queue);
-+ list_del_init(&msg->queue);
-+ spin_unlock_irqrestore(&bs->lock, flags);
-+
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-+ status = bcm2708_process_transfer(bs, msg, xfer);
-+ if (status)
-+ break;
-+ }
-+
-+ msg->status = status;
-+ msg->complete(msg->context);
-+
-+ spin_lock_irqsave(&bs->lock, flags);
-+ }
-+ spin_unlock_irqrestore(&bs->lock, flags);
-+}
-+
-+static int bcm2708_spi_setup(struct spi_device *spi)
-+{
-+ struct bcm2708_spi *bs = spi_master_get_devdata(spi->master);
-+ struct bcm2708_spi_state *state;
-+ int ret;
-+
-+ if (bs->stopping)
-+ return -ESHUTDOWN;
-+
-+ if (!(spi->mode & SPI_NO_CS) &&
-+ (spi->chip_select > spi->master->num_chipselect)) {
-+ dev_dbg(&spi->dev,
-+ "setup: invalid chipselect %u (%u defined)\n",
-+ spi->chip_select, spi->master->num_chipselect);
-+ return -EINVAL;
-+ }
-+
-+ state = spi->controller_state;
-+ if (!state) {
-+ state = kzalloc(sizeof(*state), GFP_KERNEL);
-+ if (!state)
-+ return -ENOMEM;
-+
-+ spi->controller_state = state;
-+ }
-+
-+ ret = bcm2708_setup_state(spi->master, &spi->dev, state,
-+ spi->max_speed_hz, spi->chip_select, spi->mode,
-+ spi->bits_per_word);
-+ if (ret < 0) {
-+ kfree(state);
-+ spi->controller_state = NULL;
-+ return ret;
-+ }
-+
-+ dev_dbg(&spi->dev,
-+ "setup: cd %d: %d Hz, bpw %u, mode 0x%x -> CS=%08x CDIV=%04x\n",
-+ spi->chip_select, spi->max_speed_hz, spi->bits_per_word,
-+ spi->mode, state->cs, state->cdiv);
-+
-+ return 0;
-+}
-+
-+static int bcm2708_spi_transfer(struct spi_device *spi, struct spi_message *msg)
-+{
-+ struct bcm2708_spi *bs = spi_master_get_devdata(spi->master);
-+ struct spi_transfer *xfer;
-+ int ret;
-+ unsigned long flags;
-+
-+ if (unlikely(list_empty(&msg->transfers)))
-+ return -EINVAL;
-+
-+ if (bs->stopping)
-+ return -ESHUTDOWN;
-+
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-+ if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
-+ dev_dbg(&spi->dev, "missing rx or tx buf\n");
-+ return -EINVAL;
-+ }
-+
-+ if (!xfer->bits_per_word || xfer->speed_hz)
-+ continue;
-+
-+ ret = bcm2708_setup_state(spi->master, &spi->dev, NULL,
-+ xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz,
-+ spi->chip_select, spi->mode,
-+ xfer->bits_per_word ? xfer->bits_per_word :
-+ spi->bits_per_word);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ msg->status = -EINPROGRESS;
-+ msg->actual_length = 0;
-+
-+ spin_lock_irqsave(&bs->lock, flags);
-+ list_add_tail(&msg->queue, &bs->queue);
-+ queue_work(bs->workq, &bs->work);
-+ spin_unlock_irqrestore(&bs->lock, flags);
-+
-+ return 0;
-+}
-+
-+static void bcm2708_spi_cleanup(struct spi_device *spi)
-+{
-+ if (spi->controller_state) {
-+ kfree(spi->controller_state);
-+ spi->controller_state = NULL;
-+ }
-+}
-+
-+static int bcm2708_spi_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ int irq, err = -ENOMEM;
-+ struct clk *clk;
-+ struct spi_master *master;
-+ struct bcm2708_spi *bs;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "could not get IO memory\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "could not get IRQ\n");
-+ return irq;
-+ }
-+
-+ clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk));
-+ return PTR_ERR(clk);
-+ }
-+
-+ bcm2708_init_pinmode();
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*bs));
-+ if (!master) {
-+ dev_err(&pdev->dev, "spi_alloc_master() failed\n");
-+ goto out_clk_put;
-+ }
-+
-+ /* the spi->mode bits understood by this driver: */
-+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS;
-+
-+ master->bus_num = pdev->id;
-+ master->num_chipselect = 3;
-+ master->setup = bcm2708_spi_setup;
-+ master->transfer = bcm2708_spi_transfer;
-+ master->cleanup = bcm2708_spi_cleanup;
-+ platform_set_drvdata(pdev, master);
-+
-+ bs = spi_master_get_devdata(master);
-+
-+ spin_lock_init(&bs->lock);
-+ INIT_LIST_HEAD(&bs->queue);
-+ init_completion(&bs->done);
-+ INIT_WORK(&bs->work, bcm2708_work);
-+
-+ bs->base = ioremap(regs->start, resource_size(regs));
-+ if (!bs->base) {
-+ dev_err(&pdev->dev, "could not remap memory\n");
-+ goto out_master_put;
-+ }
-+
-+ bs->workq = create_singlethread_workqueue(dev_name(&pdev->dev));
-+ if (!bs->workq) {
-+ dev_err(&pdev->dev, "could not create workqueue\n");
-+ goto out_iounmap;
-+ }
-+
-+ bs->irq = irq;
-+ bs->clk = clk;
-+ bs->stopping = false;
-+
-+ err = request_irq(irq, bcm2708_spi_interrupt, 0, dev_name(&pdev->dev),
-+ master);
-+ if (err) {
-+ dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
-+ goto out_workqueue;
-+ }
-+
-+ /* initialise the hardware */
-+ clk_enable(clk);
-+ bcm2708_wr(bs, SPI_CS, SPI_CS_REN | SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX);
-+
-+ err = spi_register_master(master);
-+ if (err) {
-+ dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
-+ goto out_free_irq;
-+ }
-+
-+ dev_info(&pdev->dev, "SPI Controller at 0x%08lx (irq %d)\n",
-+ (unsigned long)regs->start, irq);
-+
-+ return 0;
-+
-+out_free_irq:
-+ free_irq(bs->irq, master);
-+out_workqueue:
-+ destroy_workqueue(bs->workq);
-+out_iounmap:
-+ iounmap(bs->base);
-+out_master_put:
-+ spi_master_put(master);
-+out_clk_put:
-+ clk_put(clk);
-+ return err;
-+}
-+
-+static int bcm2708_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct bcm2708_spi *bs = spi_master_get_devdata(master);
-+
-+ /* reset the hardware and block queue progress */
-+ spin_lock_irq(&bs->lock);
-+ bs->stopping = true;
-+ bcm2708_wr(bs, SPI_CS, SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX);
-+ spin_unlock_irq(&bs->lock);
-+
-+ flush_work(&bs->work);
-+
-+ clk_disable(bs->clk);
-+ clk_put(bs->clk);
-+ free_irq(bs->irq, master);
-+ iounmap(bs->base);
-+
-+ spi_unregister_master(master);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver bcm2708_spi_driver = {
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = bcm2708_spi_probe,
-+ .remove = bcm2708_spi_remove,
-+};
-+
-+
-+static int __init bcm2708_spi_init(void)
-+{
-+ return platform_driver_probe(&bcm2708_spi_driver, bcm2708_spi_probe);
-+}
-+module_init(bcm2708_spi_init);
-+
-+static void __exit bcm2708_spi_exit(void)
-+{
-+ platform_driver_unregister(&bcm2708_spi_driver);
-+}
-+module_exit(bcm2708_spi_exit);
-+
-+
-+//module_platform_driver(bcm2708_spi_driver);
-+
-+MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2708");
-+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" DRV_NAME);