bcm63xx: reorganize board patches into fewer files

At the moment, bcm63xx creates one patch for each board to add to
board_bcm963xx.c. While this is not really helpful to get an overview
in the first place, it is particularly painful if you want to change
something for an early file and have to refresh all the later patches
accordingly.

Since it does not look like these board patches are upstreamed either,
this commit consolidates all board additions into one patch per "board".
By this, both adding and editing boards should become much simpler,
and we drop about 1300 lines of "code" from patches as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 292 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch b/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch
new file mode 100644
index 0000000000..ef5989ba43
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch
@@ -0,0 +1,292 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -49,6 +49,263 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_3368 */
+ 
+ /*
++ * known 6318 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6318
++static struct board_info __initdata board_96318ref = {
++	.name = "96318REF",
++	.expected_cpu_id = 0x6318,
++
++	.has_pci = 1,
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports = 1,
++
++	.has_usbd = 1,
++	.usbd = {
++		.use_fullspeed = 0,
++		.port_no = 0,
++	},
++
++	.has_enetsw = 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used = 1,
++				.phy_id = 1,
++				.name = "Port 1",
++			},
++			[1] = {
++				.used = 1,
++				.phy_id = 2,
++				.name = "Port 2",
++			},
++			[2] = {
++				.used = 1,
++				.phy_id = 3,
++				.name = "Port 3",
++			},
++			[3] = {
++				.used = 1,
++				.phy_id = 4,
++				.name = "Port 4",
++			},
++		},
++	},
++};
++
++static struct board_info __initdata board_96318ref_p300 = {
++	.name = "96318REF_P300",
++	.expected_cpu_id = 0x6318,
++
++	.has_pci = 1,
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports = 1,
++
++	.has_usbd = 1,
++	.usbd = {
++		.use_fullspeed = 0,
++		.port_no = 0,
++	},
++
++	.has_enetsw = 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used = 1,
++				.phy_id = 1,
++				.name = "Port 1",
++			},
++			[1] = {
++				.used = 1,
++				.phy_id = 2,
++				.name = "Port 2",
++			},
++			[2] = {
++				.used = 1,
++				.phy_id = 3,
++				.name = "Port 3",
++			},
++			[3] = {
++				.used = 1,
++				.phy_id = 4,
++				.name = "Port 4",
++			},
++		},
++	},
++};
++
++static struct sprom_fixup __initdata ar5315u_fixups[] = {
++	{ .offset = 6, .value = 0x1c00 },
++	{ .offset = 65, .value = 0x1255 },
++	{ .offset = 97, .value = 0xfe55 },
++	{ .offset = 98, .value = 0x171d },
++	{ .offset = 99, .value = 0xfa42 },
++	{ .offset = 113, .value = 0xfeb7 },
++	{ .offset = 114, .value = 0x18cd },
++	{ .offset = 115, .value = 0xfa4f },
++	{ .offset = 162, .value = 0x6444 },
++	{ .offset = 170, .value = 0x6444 },
++	{ .offset = 172, .value = 0x6444 },
++};
++
++static struct board_info __initdata board_AR5315u = {
++	.name = "96318A-1441N1",
++	.expected_cpu_id = 0x6318,
++
++	.has_pci = 1,
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports = 1,
++
++	.has_enetsw = 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used = 1,
++				.phy_id = 1,
++				.name = "LAN4",
++			},
++			[1] = {
++				.used = 1,
++				.phy_id = 2,
++				.name = "LAN3",
++			},
++			[2] = {
++				.used = 1,
++				.phy_id = 3,
++				.name = "LAN2",
++			},
++			[3] = {
++				.used = 1,
++				.phy_id = 4,
++				.name = "LAN1",
++			},
++		},
++	},
++
++	.use_fallback_sprom = 1,
++	.fallback_sprom = {
++		.type = SPROM_BCM43217,
++		.pci_bus = 1,
++		.pci_dev = 0,
++		.board_fixups = ar5315u_fixups,
++		.num_board_fixups = ARRAY_SIZE(ar5315u_fixups),
++	},
++};
++
++static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
++	{ .offset = 96, .value = 0x2046 },
++	{ .offset = 97, .value = 0xfe9d },
++	{ .offset = 98, .value = 0x1854 },
++	{ .offset = 99, .value = 0xfa59 },
++	{ .offset = 112, .value = 0x2046 },
++	{ .offset = 113, .value = 0xfe79 },
++	{ .offset = 114, .value = 0x17f5 },
++	{ .offset = 115, .value = 0xfa47 },
++	{ .offset = 161, .value = 0x2222 },
++	{ .offset = 162, .value = 0x2222 },
++	{ .offset = 169, .value = 0x2222 },
++	{ .offset = 170, .value = 0x2222 },
++	{ .offset = 171, .value = 0x5555 },
++	{ .offset = 172, .value = 0x5555 },
++	{ .offset = 173, .value = 0x4444 },
++	{ .offset = 174, .value = 0x4444 },
++	{ .offset = 175, .value = 0x5555 },
++	{ .offset = 176, .value = 0x5555 },
++};
++
++static struct board_info __initdata board_dsl_2751b_d1 = {
++	.name = "AW5200B",
++	.expected_cpu_id = 0x6318,
++
++	.has_pci = 1,
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports = 1,
++
++	.has_enetsw = 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used = 1,
++				.phy_id = 1,
++				.name = "Port 1",
++			},
++			[1] = {
++				.used = 1,
++				.phy_id = 2,
++				.name = "Port 2",
++			},
++			[2] = {
++				.used = 1,
++				.phy_id = 3,
++				.name = "Port 3",
++			},
++			[3] = {
++				.used = 1,
++				.phy_id = 4,
++				.name = "Port 4",
++			},
++		},
++	},
++
++	.use_fallback_sprom = 1,
++	.fallback_sprom = {
++		.type = SPROM_BCM43217,
++		.pci_bus = 1,
++		.pci_dev = 0,
++		.board_fixups = dsl2751b_e1_fixups,
++		.num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
++	},
++};
++
++static struct board_info __initdata board_FAST2704N = {
++	.name = "F@ST2704N",
++	.expected_cpu_id = 0x6318,
++
++	.has_pci = 1,
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports = 1,
++
++	.has_enetsw = 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used = 1,
++				.phy_id = 1,
++				.name = "Port 1",
++			},
++			[1] = {
++				.used = 1,
++				.phy_id = 2,
++				.name = "Port 2",
++			},
++			[2] = {
++				.used = 1,
++				.phy_id = 3,
++				.name = "Port 3",
++			},
++			[3] = {
++				.used = 1,
++				.phy_id = 4,
++				.name = "Port 4",
++			},
++		},
++	},
++
++	.use_fallback_sprom = 1,
++	.fallback_sprom = {
++		.type = SPROM_BCM43217,
++		.pci_bus = 1,
++		.pci_dev = 0,
++	},
++};
++#endif /* CONFIG_BCM63XX_CPU_6318 */
++
++/*
+  * known 6328 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+@@ -437,6 +694,13 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_3368
+ 	&board_cvg834g,
+ #endif /* CONFIG_BCM63XX_CPU_3368 */
++#ifdef CONFIG_BCM63XX_CPU_6318
++	&board_96318ref,
++	&board_96318ref_p300,
++	&board_AR5315u,
++	&board_dsl_2751b_d1,
++	&board_FAST2704N,
++#endif /* CONFIG_BCM63XX_CPU_6318 */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+@@ -471,6 +735,11 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif /* CONFIG_BCM63XX_CPU_3368 */
+ #ifdef CONFIG_BCM63XX_CPU_6318
++	{ .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
++	{ .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
++	{ .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
++	{ .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
++	{ .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },