brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 61 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/bcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
new file mode 100644
index 0000000000..846f0b81df
--- /dev/null
+++ b/target/linux/bcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
@@ -0,0 +1,61 @@
+From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 04:28:14 +0100
+Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
+ flash address
+
+Allow board implementations to force the physmap address.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
+ .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
+ 2 files changed, 16 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
+ 	},
+ };
+ 
++void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
++{
++	mtd_resources[0].start = start;
++	mtd_resources[0].end = end;
++}
++
+ static int __init bcm63xx_detect_flash_type(void)
+ {
+ 	u32 val;
+@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void)
+ 
+ 	switch (flash_type) {
+ 	case BCM63XX_FLASH_TYPE_PARALLEL:
+-		/* read base address of boot chip select (0) */
+-		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+-		val &= MPI_CSBASE_BASE_MASK;
+ 
+-		mtd_resources[0].start = val;
+-		mtd_resources[0].end = 0x1FFFFFFF;
++		if (!mtd_resources[0].start) {
++			/* read base address of boot chip select (0) */
++			val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++			val &= MPI_CSBASE_BASE_MASK;
++
++			mtd_resources[0].start = val;
++			mtd_resources[0].end = 0x1FFFFFFF;
++		}
+ 
+ 		return platform_device_register(&mtd_dev);
+ 	case BCM63XX_FLASH_TYPE_SERIAL:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -10,6 +10,8 @@ enum {
+ 
+ void bcm63xx_flash_detect(void);
+ 
++void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
++
+ int __init bcm63xx_flash_register(void);
+ 
+ #endif /* __BCM63XX_FLASH_H */