bcm63xx: remove linux 4.14 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 269 deletions

diff --git a/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644
index c9532e6cb4..0000000000
--- a/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ /dev/null
@@ -1,269 +0,0 @@
-From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
- 1 file changed, 78 insertions(+), 80 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
- 	struct bcm_enet_priv *priv;
- 	struct sockaddr addr;
- 	struct device *kdev;
--	struct phy_device *phydev;
- 	int i, ret;
- 	unsigned int size;
--	char phy_id[MII_BUS_ID_SIZE + 3];
- 	void *p;
- 	u32 val;
- 
-@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
- 	kdev = &priv->pdev->dev;
- 
- 	if (priv->has_phy) {
--		/* connect to PHY */
--		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
--			 priv->mii_bus->id, priv->phy_id);
--
--		phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
--				     PHY_INTERFACE_MODE_MII);
--
--		if (IS_ERR(phydev)) {
--			dev_err(kdev, "could not attach to PHY\n");
--			return PTR_ERR(phydev);
--		}
--
--		/* mask with MAC supported features */
--		phydev->supported &= (SUPPORTED_10baseT_Half |
--				      SUPPORTED_10baseT_Full |
--				      SUPPORTED_100baseT_Half |
--				      SUPPORTED_100baseT_Full |
--				      SUPPORTED_Autoneg |
--				      SUPPORTED_Pause |
--				      SUPPORTED_MII);
--		phydev->advertising = phydev->supported;
--
--		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
--			phydev->advertising |= SUPPORTED_Pause;
--		else
--			phydev->advertising &= ~SUPPORTED_Pause;
--
--		phy_attached_info(phydev);
--
-+		/* Reset state */
- 		priv->old_link = 0;
- 		priv->old_duplex = -1;
- 		priv->old_pause = -1;
--	} else {
--		phydev = NULL;
- 	}
- 
- 	/* mask all interrupts and request them */
-@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
- 
- 	ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- 	if (ret)
--		goto out_phy_disconnect;
-+		return ret;
- 
- 	ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
- 			  dev->name, dev);
-@@ -1086,8 +1054,8 @@ static int bcm_enet_open(struct net_devi
- 	enet_dmac_writel(priv, priv->dma_chan_int_mask,
- 			 ENETDMAC_IRMASK, priv->tx_chan);
- 
--	if (phydev)
--		phy_start(phydev);
-+	if (priv->has_phy)
-+		phy_start(dev->phydev);
- 	else
- 		bcm_enet_adjust_link(dev);
- 
-@@ -1128,10 +1096,6 @@ out_freeirq_rx:
- out_freeirq:
- 	free_irq(dev->irq, dev);
- 
--out_phy_disconnect:
--	if (phydev)
--		phy_disconnect(phydev);
--
- 	return ret;
- }
- 
-@@ -1236,10 +1200,6 @@ static int bcm_enet_stop(struct net_devi
- 	free_irq(priv->irq_rx, dev);
- 	free_irq(dev->irq, dev);
- 
--	/* release phy */
--	if (priv->has_phy)
--		phy_disconnect(dev->phydev);
--
- 	return 0;
- }
- 
-@@ -1805,14 +1765,49 @@ static int bcm_enet_probe(struct platfor
- 
- 	/* do minimal hardware init to be able to probe mii bus */
- 	bcm_enet_hw_preinit(priv);
-+	spin_lock_init(&priv->rx_lock);
-+
-+	/* init rx timeout (used for oom) */
-+	init_timer(&priv->rx_timeout);
-+	priv->rx_timeout.function = bcm_enet_refill_rx_timer;
-+	priv->rx_timeout.data = (unsigned long)dev;
-+
-+	/* init the mib update lock&work */
-+	mutex_init(&priv->mib_update_lock);
-+	INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
-+
-+	/* zero mib counters */
-+	for (i = 0; i < ENET_MIB_REG_COUNT; i++)
-+		enet_writel(priv, 0, ENET_MIB_REG(i));
-+
-+	/* register netdevice */
-+	dev->netdev_ops = &bcm_enet_ops;
-+	netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
-+
-+	dev->ethtool_ops = &bcm_enet_ethtool_ops;
-+	/* MTU range: 46 - 2028 */
-+	dev->min_mtu = ETH_ZLEN - ETH_HLEN;
-+	dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
-+	SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+	ret = register_netdev(dev);
-+	if (ret)
-+		goto out_uninit_hw;
-+
-+	netif_carrier_off(dev);
-+	platform_set_drvdata(pdev, dev);
-+	priv->pdev = pdev;
-+	priv->net_dev = dev;
- 
- 	/* MII bus registration */
- 	if (priv->has_phy) {
-+		struct phy_device *phydev;
-+		char phy_id[MII_BUS_ID_SIZE + 3];
- 
- 		priv->mii_bus = mdiobus_alloc();
- 		if (!priv->mii_bus) {
- 			ret = -ENOMEM;
--			goto out_uninit_hw;
-+			goto out_unregister_netdev;
- 		}
- 
- 		bus = priv->mii_bus;
-@@ -1836,6 +1831,35 @@ static int bcm_enet_probe(struct platfor
- 			dev_err(&pdev->dev, "unable to register mdio bus\n");
- 			goto out_free_mdio;
- 		}
-+
-+		/* connect to PHY */
-+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+			 priv->mii_bus->id, priv->phy_id);
-+
-+		phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-+				     PHY_INTERFACE_MODE_MII);
-+
-+		if (IS_ERR(phydev)) {
-+			dev_err(&pdev->dev, "could not attach to PHY\n");
-+			goto out_unregister_mdio;
-+		}
-+
-+		/* mask with MAC supported features */
-+		phydev->supported &= (SUPPORTED_10baseT_Half |
-+				      SUPPORTED_10baseT_Full |
-+				      SUPPORTED_100baseT_Half |
-+				      SUPPORTED_100baseT_Full |
-+				      SUPPORTED_Autoneg |
-+				      SUPPORTED_Pause |
-+				      SUPPORTED_MII);
-+		phydev->advertising = phydev->supported;
-+
-+		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-+			phydev->advertising |= SUPPORTED_Pause;
-+		else
-+			phydev->advertising &= ~SUPPORTED_Pause;
-+
-+		phy_attached_info(phydev);
- 	} else {
- 
- 		/* run platform code to initialize PHY device */
-@@ -1843,47 +1867,16 @@ static int bcm_enet_probe(struct platfor
- 		    pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
- 				   bcm_enet_mdio_write_mii)) {
- 			dev_err(&pdev->dev, "unable to configure mdio bus\n");
--			goto out_uninit_hw;
-+			goto out_unregister_netdev;
- 		}
- 	}
- 
--	spin_lock_init(&priv->rx_lock);
--
--	/* init rx timeout (used for oom) */
--	init_timer(&priv->rx_timeout);
--	priv->rx_timeout.function = bcm_enet_refill_rx_timer;
--	priv->rx_timeout.data = (unsigned long)dev;
--
--	/* init the mib update lock&work */
--	mutex_init(&priv->mib_update_lock);
--	INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
--
--	/* zero mib counters */
--	for (i = 0; i < ENET_MIB_REG_COUNT; i++)
--		enet_writel(priv, 0, ENET_MIB_REG(i));
--
--	/* register netdevice */
--	dev->netdev_ops = &bcm_enet_ops;
--	netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
--
--	dev->ethtool_ops = &bcm_enet_ethtool_ops;
--	/* MTU range: 46 - 2028 */
--	dev->min_mtu = ETH_ZLEN - ETH_HLEN;
--	dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
--	SET_NETDEV_DEV(dev, &pdev->dev);
--
--	ret = register_netdev(dev);
--	if (ret)
--		goto out_unregister_mdio;
--
--	netif_carrier_off(dev);
--	platform_set_drvdata(pdev, dev);
--	priv->pdev = pdev;
--	priv->net_dev = dev;
--
- 	return 0;
- 
- out_unregister_mdio:
-+	if (dev->phydev)
-+		phy_disconnect(dev->phydev);
-+
- 	if (priv->mii_bus)
- 		mdiobus_unregister(priv->mii_bus);
- 
-@@ -1891,6 +1884,9 @@ out_free_mdio:
- 	if (priv->mii_bus)
- 		mdiobus_free(priv->mii_bus);
- 
-+out_unregister_netdev:
-+	unregister_netdev(dev);
-+
- out_uninit_hw:
- 	/* turn off mdc clock */
- 	enet_writel(priv, 0, ENET_MIISC_REG);
-@@ -1921,6 +1917,7 @@ static int bcm_enet_remove(struct platfo
- 	enet_writel(priv, 0, ENET_MIISC_REG);
- 
- 	if (priv->has_phy) {
-+		phy_disconnect(dev->phydev);
- 		mdiobus_unregister(priv->mii_bus);
- 		mdiobus_free(priv->mii_bus);
- 	} else {