brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 146 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts
new file mode 100644
index 0000000000..fa804bef9e
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts
@@ -0,0 +1,146 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Huawei EchoLife HG556a (version B)";
+	compatible = "huawei,echolife-hg556a-b", "brcm,bcm6358";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		help {
+			label = "help";
+			gpios = <&pinctrl 8 1>;
+			linux,code = <KEY_HELP>;
+			debounce-interval = <60>;
+		};
+
+		wlan {
+			label = "wlan";
+			gpios = <&pinctrl 9 1>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		restart {
+			label = "restart";
+			gpios = <&pinctrl 10 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 11 1>;
+			linux,code = <KEY_CONFIG>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		message_red {
+			label = "HW556:red:message";
+			gpios = <&pinctrl 0 1>;
+		};
+		hspa_red {
+			label = "HW556:red:hspa";
+			gpios = <&pinctrl 1 1>;
+		};
+		dsl_red {
+			label = "HW556:red:dsl";
+			gpios = <&pinctrl 2 1>;
+		};
+		power_red {
+			label = "HW556:red:power";
+			gpios = <&pinctrl 3 1>;
+			default-state = "on";
+		};
+		all_red {
+			label = "HW556:red:all";
+			gpios = <&pinctrl 6 1>;
+			default-state = "on";
+		};
+		lan1_green {
+			label = "HW556:green:lan1";
+			gpios = <&pinctrl 12 1>;
+		};
+		lan1_red {
+			label = "HW556:red:lan1";
+			gpios = <&pinctrl 13 1>;
+		};
+		lan2_green {
+			label = "HW556:green:lan2";
+			gpios = <&pinctrl 15 1>;
+		};
+		lan2_red {
+			label = "HW556:red:lan2";
+			gpios = <&pinctrl 22 1>;
+		};
+		lan3_green {
+			label = "HW556:green:lan3";
+			gpios = <&pinctrl 23 1>;
+		};
+		lan3_red {
+			label = "HW556:red:lan3";
+			gpios = <&pinctrl 26 1>;
+		};
+		lan4_green {
+			label = "HW556:green:lan4";
+			gpios = <&pinctrl 27 1>;
+		};
+		lan4_red {
+			label = "HW556:red:lan4";
+			gpios = <&pinctrl 28 1>;
+		};
+	};
+};
+
+&pflash {
+	status = "ok";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe@0 {
+			label = "CFE";
+			reg = <0x000000 0x020000>;
+			read-only;
+		};
+
+		linux@20000 {
+			label = "linux";
+			reg = <0x020000 0xec0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		cal_data@ee0000 {
+			label = "cal_data";
+			reg = <0xee0000 0x100000>;
+			read-only;
+		};
+
+		nvram@fe0000 {
+			label = "nvram";
+			reg = <0xfe0000 0x020000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};