diff options
author | Daniele Castro <danielecastro@hotmail.it> | 2020-09-10 21:14:11 +0200 |
---|---|---|
committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2020-12-06 19:17:41 +0100 |
commit | 59c2f9eaad5688af523ff60d2f83d5d81447009b (patch) | |
tree | f352ac3176fb174445f5539594935d089e057083 /target/linux/bcm63xx/dts/bcm6328-technicolor-tg582n.dts | |
parent | c143fbc5f1a505f7c108f9b0c7f71517fb5cee50 (diff) | |
download | upstream-59c2f9eaad5688af523ff60d2f83d5d81447009b.tar.gz upstream-59c2f9eaad5688af523ff60d2f83d5d81447009b.tar.bz2 upstream-59c2f9eaad5688af523ff60d2f83d5d81447009b.zip |
bcm63xx: add support for Technicolor TG582n
Technicolor TG582n has a similar PCB as the OpenWrt's ADB P.DG A4001N1
with LEDs connected to different GPIO PINs in active low configuration.
Hardware:
* Board ID: DANT-1
* SoC: Broadcom BCM6328 (rev b0) @ 320MHz, CPU BMIPS4350
* RAM DDR2: 64 Mbyte - Winbond W9751G6KB-25
* Serial flash: 16 Mbyte - MXIC MX25L6445EMI
* Ethernet: 4x Ethernet 10/100 baseT
* Wifi 2.4GHz: Broadcom Corporation BCM43227 Wireless Network Adapter (rev 30)
* LEDs: 2x Power, 1x Ethernet, 1x Broadband, 2x Wi-Fi, 2x WPS, 4x ethernet
* Buttons: 1x Reset, 1x WPS, 1x WiFi
* UART: 1x TTL 115200n8, VCC GND TX RX, on J3 connector (short R62 and R63)
Installation via CFE:
* Stock CFE has to be overwritten with a generic 6328 one that can upload
.bin images with no signature check (cfe6328_configured.bin)
* Connect a serial port to the board
* Stop the CFE boot process after power on by pressing enter
* Set static IP 192.168.2.10 and subnet mask 255.255.255.0
* Navigate to http://192.168.2.50/
* Upload the OpenWrt image file
PCB: |GPIO: |TG582n:
LED2R |488(08) |red Power
LED2G |484(04) |green Power
LED10R |486(06) |
LED13G |485(05) |green Ethernet
LED11R |494(14) |
LED14G |491(11) |green Broadband
LED5R |487(07) |red Internet
LED5G |481(01) |green Internet
LED12R |498(18) |
LED12G |499(19) |
LED6R |482(02) |red Wi-Fi
LED6G |483(03) |green Wi-Fi
LED7R |490(10) |red WPS
LED7G |489(09) |green WPS
LED4 |508(28) |ethernet port 4
LED3 |507(27) |ethernet port 3
LED9 |506(26) |ethernet port 2
LED8 |505(25) |ethernet port 1
SW3 |503(23) |key Reset
SW5 |504(24) |key WPS
SW4 |495(15) |key Wi-Fi
SW6 |493(13) |
SW1 |492(12) |
Signed-off-by: Daniele Castro <danielecastro@hotmail.it>
[Fix base-files, refresh patch]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/bcm63xx/dts/bcm6328-technicolor-tg582n.dts')
-rw-r--r-- | target/linux/bcm63xx/dts/bcm6328-technicolor-tg582n.dts | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/target/linux/bcm63xx/dts/bcm6328-technicolor-tg582n.dts b/target/linux/bcm63xx/dts/bcm6328-technicolor-tg582n.dts new file mode 100644 index 0000000000..6ec20048cd --- /dev/null +++ b/target/linux/bcm63xx/dts/bcm6328-technicolor-tg582n.dts @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "bcm6328.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Technicolor TG582n"; + compatible = "technicolor,tg582n", "brcm,bcm6328"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + chosen { + bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + }; + + keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + wifi { + label = "wifi"; + gpios = <&pinctrl 15 1>; + linux,code = <KEY_WLAN>; + debounce-interval = <60>; + }; + + reset { + label = "reset"; + gpios = <&pinctrl 23 1>; + linux,code = <KEY_RESTART>; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + gpios = <&pinctrl 24 1>; + linux,code = <KEY_WPS_BUTTON>; + debounce-interval = <60>; + }; + }; +}; + +&leds { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led@1 { + reg = <1>; + active-low; + label = "green:internet"; + }; + + led@2 { + reg = <2>; + active-low; + label = "red:wifi"; + }; + + led@3 { + reg = <3>; + active-low; + label = "green:wifi"; + }; + + led_power_green: led@4 { + reg = <4>; + active-low; + label = "green:power"; + default-state = "on"; + }; + + led@5 { + reg = <5>; + active-low; + label = "green:ethernet"; + }; + + led@7 { + reg = <7>; + active-low; + label = "red:internet"; + }; + + led@8 { + reg = <8>; + active-low; + label = "red:power"; + }; + + led@9 { + reg = <9>; + active-low; + label = "green:wps"; + }; + + led@10 { + reg = <10>; + active-low; + label = "red:wps"; + }; + + led@11 { + reg = <11>; + active-low; + label = "green:broadband"; + }; +}; + +&hsspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <16666667>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x010000>; + label = "cfe"; + read-only; + }; + + partition@10000 { + reg = <0x010000 0xff0000>; + label = "linux"; + compatible = "brcm,bcm963xx-imagetag"; + }; + }; + }; +}; + +&pinctrl { + pinctrl_leds: leds { + function = "led"; + pins = "gpio1", "gpio2", + "gpio3", "gpio4", + "gpio5", "gpio7", + "gpio8", "gpio9", + "gpio10", "gpio11"; + }; +}; + +&uart0 { + status = "okay"; +}; |