bcm53xx: backport DTS changes queued for the 4.21

It just replaces some downstream patches & adds relicensing work.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 0 insertions, 64 deletions

diff --git a/target/linux/bcm53xx/patches-4.14/315-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch b/target/linux/bcm53xx/patches-4.14/315-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch
deleted file mode 100644
index 3ac8602fa7..0000000000
--- a/target/linux/bcm53xx/patches-4.14/315-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch
+++ /dev/null
@@ -1,64 +0,0 @@
----
- arch/arm/boot/dts/Makefile                      |  1 +
- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 41 +++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4708-asus-rt-ac68u.dtb \
- 	bcm4708-buffalo-wzr-1750dhp.dtb \
- 	bcm4708-linksys-ea6300-v1.dtb \
-+	bcm4708-linksys-ea6500-v2.dtb \
- 	bcm4708-luxul-xap-1510.dtb \
- 	bcm4708-luxul-xwc-1000.dtb \
- 	bcm4708-netgear-r6250.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -0,0 +1,45 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "linksys,ea6500-v2", "brcm,bcm4708";
-+	model = "Linksys EA6500 V2";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000>;
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+&usb3_phy {
-+	status = "okay";
-+};