diff options
| author | Chris Morgan <macromorgan@hotmail.com> | 2020-03-11 16:00:42 -0500 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-04-07 01:00:10 +0200 |
| commit | 7daab6286110b95167e291409395494f18edc9dc (patch) | |
| tree | 7d739df88c17d0ebc71258cd1a78421c8a8c4352 /target/linux/bcm53xx/base-files | |
| parent | ae06a650d68026530beec4196869706866c2e4b1 (diff) | |
| download | upstream-7daab6286110b95167e291409395494f18edc9dc.tar.gz upstream-7daab6286110b95167e291409395494f18edc9dc.tar.bz2 upstream-7daab6286110b95167e291409395494f18edc9dc.zip | |
ath79: add support for Comfast CF-EW72
Specifications:
Qualcomm/Atheros QCA9531 + QCA9886
2x 10/100 Mbps Ethernet, with 48v PoE
2T2R 2.4 GHz, 802.11b/g/n
2T2R 5 GHz, 802.11a/n/ac
128MB RAM
16MB SPI Flash
4x LED (Always On Power, LAN, WAN, WLAN)
Flashing Instructions:
Original firmware is based on OpenWRT, so flashing the sysupgrade image on
the factory firmware is sufficient.
Tested: Reset button, WAN LED, LAN LED, Power LED (always on, not much
to test), WLAN LED (one LED only for 2 interfaces, by default it gets
assigned to the first interface), MAC addresses (match factory firmware).
My LAN factory MAC address ends in F2.
use stock_mac art_loc
lan :f2 0x0
wan :f3 0x1002
5g :f4 0x6
2g :f5 0x5006
Since MAC address flash locations do not really match their use in vendor
firmware (e.g. address from 5 GHz calibration data is assigned to 2.4 GHz
WiFi), just calculate the MAC addresses with an offset based on 0x0 address.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
[add MAC address comment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/bcm53xx/base-files')
0 files changed, 0 insertions, 0 deletions