diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2021-04-11 15:43:19 +0200 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2021-04-11 17:35:12 +0200 |
| commit | 3da861ccca53370a198db152197e42c3c7d1ea69 (patch) | |
| tree | 6631fe52bf2cb34dd59fc6923ddc78129eac5453 /target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch | |
| parent | 1663dc7e82f1bfbcfd6e7279e289048e6059110e (diff) | |
| download | upstream-3da861ccca53370a198db152197e42c3c7d1ea69.tar.gz upstream-3da861ccca53370a198db152197e42c3c7d1ea69.tar.bz2 upstream-3da861ccca53370a198db152197e42c3c7d1ea69.zip | |
kernel: bump 5.4 to 5.4.111
Refreshed all patches.
The following patches were manually changed:
* 610-netfilter_match_bypass_default_checks.patch
* 611-netfilter_match_bypass_default_table.patch
* 802-can-0002-can-rx-offload-fix-long-lines.patch
* 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch
* 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch
* 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch
* 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch
* 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch
The can-dev.ko model was moved in the upstream kernel.
Compile-tested on: x86/64, armvirt/64, ath79/generic
Runtime-tested on: x86/64, armvirt/64, ath79/generic
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch')
| -rw-r--r-- | target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch b/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch index 2087559262..c9e4c67376 100644 --- a/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch +++ b/target/linux/bcm4908/patches-5.4/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch @@ -29,7 +29,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c -@@ -1319,10 +1319,14 @@ static int bcm_sf2_sw_probe(struct platf +@@ -1321,10 +1321,14 @@ static int bcm_sf2_sw_probe(struct platf rev = reg_readl(priv, REG_PHY_REVISION); priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK; |