diff options
| author | Edward Matijevic <motolav@gmail.com> | 2020-06-23 14:50:04 -0500 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-24 00:17:49 +0200 |
| commit | 6da319412753ac99a895f09b9735c7f44fd0bf2c (patch) | |
| tree | 18760bfe9203b95017604fcb1fd067dc3a887a0e /target/linux/bcm47xx/base-files/etc/board.d/01_network | |
| parent | 46a6586c83e029446ea35b02a328e5f7935d4a9f (diff) | |
| download | upstream-6da319412753ac99a895f09b9735c7f44fd0bf2c.tar.gz upstream-6da319412753ac99a895f09b9735c7f44fd0bf2c.tar.bz2 upstream-6da319412753ac99a895f09b9735c7f44fd0bf2c.zip | |
bcm47xx: add support for NETGEAR R6200 V1
This patch adds supports for the NETGEAR R6200 V1
This device is mainlined in Linux as of 5.4
Specification:
- SOC: Broadcom BCM4718A1 (480 MHz)
- Flash: 16MB (Macronix MX25L128)
- RAM: 128MB DDR2
- SWITCH: BCM53125
- Ethernet: 5x GE (1 WAN + 4 LAN, Inverted order)
- WLAN 2.4G: In SOC
- WLAN 5GHz: miniPCIe card, BCM4352 (ID: 4360)
- USB: 1x USB 2.0 port (Type A)
- Buttons: Reset, WLAN, WPS
- LED: Amber for Power, others need a workaround
- UART: 1x UART on PCB
LED Issues: They are controlled by a 74HC164 via bit banging(GPIO 6/7)
Firmware Install Instructions
=============================
Using the device specific .chk, use that file to perform
a normal device upgrade in the OEM admin page.
Signed-off-by: Edward Matijevic <motolav@gmail.com>
Diffstat (limited to 'target/linux/bcm47xx/base-files/etc/board.d/01_network')
| -rwxr-xr-x | target/linux/bcm47xx/base-files/etc/board.d/01_network | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/bcm47xx/base-files/etc/board.d/01_network b/target/linux/bcm47xx/base-files/etc/board.d/01_network index e6311d8139..41a2077ea1 100755 --- a/target/linux/bcm47xx/base-files/etc/board.d/01_network +++ b/target/linux/bcm47xx/base-files/etc/board.d/01_network @@ -177,6 +177,11 @@ configure_by_model() { "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0" ;; + "Netgear R6200 V1") + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "8@eth0" + ;; + "Netgear WN2500RP V1") ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" |