diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2022-02-12 16:01:04 +0000 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-02-12 19:41:39 +0100 |
commit | c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb (patch) | |
tree | 3c230c7cee76b73f451702b26df5e79e3c82306b /target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch | |
parent | a4c0c031b8c51daf52ba2947ce139b37bae47086 (diff) | |
download | upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.tar.gz upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.tar.bz2 upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.zip |
kernel: bump 5.4 to 5.4.179
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch')
-rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch b/target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch index bae0f84e1a..5b49ee727c 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0217-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch @@ -15,7 +15,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1103,8 +1103,10 @@ static int bcm2835_clock_on(struct clk_h +@@ -1098,8 +1098,10 @@ static int bcm2835_clock_on(struct clk_h return 0; } @@ -28,7 +28,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> { struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct bcm2835_cprman *cprman = clock->cprman; -@@ -1126,6 +1128,11 @@ static int bcm2835_clock_set_rate(struct +@@ -1121,6 +1123,11 @@ static int bcm2835_clock_set_rate(struct bcm2835_clock_wait_busy(clock); } @@ -40,7 +40,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> ctl &= ~CM_FRAC; ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0; cprman_write(cprman, data->ctl_reg, ctl); -@@ -1137,6 +1144,12 @@ static int bcm2835_clock_set_rate(struct +@@ -1132,6 +1139,12 @@ static int bcm2835_clock_set_rate(struct return 0; } @@ -53,7 +53,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> static bool bcm2835_clk_is_pllc(struct clk_hw *hw) { -@@ -1320,6 +1333,7 @@ static const struct clk_ops bcm2835_cloc +@@ -1315,6 +1328,7 @@ static const struct clk_ops bcm2835_cloc .unprepare = bcm2835_clock_off, .recalc_rate = bcm2835_clock_get_rate, .set_rate = bcm2835_clock_set_rate, @@ -61,7 +61,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> .determine_rate = bcm2835_clock_determine_rate, .set_parent = bcm2835_clock_set_parent, .get_parent = bcm2835_clock_get_parent, -@@ -1498,7 +1512,6 @@ static struct clk_hw *bcm2835_register_c +@@ -1493,7 +1507,6 @@ static struct clk_hw *bcm2835_register_c init.ops = &bcm2835_vpu_clock_clk_ops; } else { init.ops = &bcm2835_clock_clk_ops; |