diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2022-02-12 16:01:04 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-02-12 19:41:39 +0100 |
| commit | c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb (patch) | |
| tree | 3c230c7cee76b73f451702b26df5e79e3c82306b /target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch | |
| parent | a4c0c031b8c51daf52ba2947ce139b37bae47086 (diff) | |
| download | upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.tar.gz upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.tar.bz2 upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.zip | |
kernel: bump 5.4 to 5.4.179
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch b/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch index 0ddcf6f1a8..b391bf0579 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0022-clk-bcm2835-Read-max-core-clock-from-firmware.patch @@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> spinlock_t regs_lock; /* spinlock for all clocks */ unsigned int soc; -@@ -1015,6 +1019,30 @@ static unsigned long bcm2835_clock_get_r +@@ -1010,6 +1014,30 @@ static unsigned long bcm2835_clock_get_r return bcm2835_clock_rate_from_divisor(clock, parent_rate, div); } @@ -81,7 +81,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock) { struct bcm2835_cprman *cprman = clock->cprman; -@@ -1303,7 +1331,7 @@ static int bcm2835_vpu_clock_is_on(struc +@@ -1298,7 +1326,7 @@ static int bcm2835_vpu_clock_is_on(struc */ static const struct clk_ops bcm2835_vpu_clock_clk_ops = { .is_prepared = bcm2835_vpu_clock_is_on, @@ -90,7 +90,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> .set_rate = bcm2835_clock_set_rate, .determine_rate = bcm2835_clock_determine_rate, .set_parent = bcm2835_clock_set_parent, -@@ -2241,6 +2269,7 @@ static int bcm2835_clk_probe(struct plat +@@ -2236,6 +2264,7 @@ static int bcm2835_clk_probe(struct plat const struct bcm2835_clk_desc *desc; const size_t asize = ARRAY_SIZE(clk_desc_array); const struct cprman_plat_data *pdata; @@ -98,7 +98,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> size_t i; u32 clk_id; int ret; -@@ -2262,6 +2291,14 @@ static int bcm2835_clk_probe(struct plat +@@ -2257,6 +2286,14 @@ static int bcm2835_clk_probe(struct plat if (IS_ERR(cprman->regs)) return PTR_ERR(cprman->regs); |