diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2022-08-28 15:09:23 +0200 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-08-28 16:56:01 +0200 |
| commit | 9703a2adcc9511a8db33427e8110642b6a197873 (patch) | |
| tree | 2ed55e96b82e6a95a2318b20db803b695bc8237e /target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch | |
| parent | 251336639c7c6d5e9ab5d0e4491089c08749ce3c (diff) | |
| download | upstream-9703a2adcc9511a8db33427e8110642b6a197873.tar.gz upstream-9703a2adcc9511a8db33427e8110642b6a197873.tar.bz2 upstream-9703a2adcc9511a8db33427e8110642b6a197873.zip | |
kernel: Refresh on 5.10.138
Refresh all patches on top of kernel 5.10.138.
The following patches were applied upstream:
bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch
bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch
bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch
bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch
bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch
bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch
bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch
bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch
bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch
bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more.
bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch
Fixes: 89956c653252 ("kernel: bump 5.10 to 5.10.138")
Fixes: 4209c33ae27d ("kernel: bump 5.10 to 5.10.137")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch b/target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch index 6be52cb43b..7149776277 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0667-drm-vc4-hdmi-Put-the-device-on-error-in-pre_crtc_con.patch @@ -16,7 +16,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c -@@ -901,6 +901,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -903,6 +903,7 @@ static void vc4_hdmi_encoder_pre_crtc_co ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev); if (ret < 0) { DRM_ERROR("Failed to retain power domain: %d\n", ret); @@ -24,7 +24,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -908,12 +909,14 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -910,12 +911,14 @@ static void vc4_hdmi_encoder_pre_crtc_co ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate); if (ret) { DRM_ERROR("Failed to set pixel clock rate: %d\n", ret); @@ -39,7 +39,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -921,6 +924,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -923,6 +926,7 @@ static void vc4_hdmi_encoder_pre_crtc_co vc4_hdmi->hsm_req = clk_request_start(vc4_hdmi->hsm_clock, hsm_rate); if (IS_ERR(vc4_hdmi->hsm_req)) { DRM_ERROR("Failed to set HSM clock rate: %ld\n", PTR_ERR(vc4_hdmi->hsm_req)); @@ -47,7 +47,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -942,6 +946,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -944,6 +948,7 @@ static void vc4_hdmi_encoder_pre_crtc_co clk_request_done(vc4_hdmi->hsm_req); clk_disable_unprepare(vc4_hdmi->hsm_clock); clk_disable_unprepare(vc4_hdmi->pixel_clock); @@ -55,7 +55,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech> return; } -@@ -953,6 +958,7 @@ static void vc4_hdmi_encoder_pre_crtc_co +@@ -955,6 +960,7 @@ static void vc4_hdmi_encoder_pre_crtc_co clk_request_done(vc4_hdmi->hsm_req); clk_disable_unprepare(vc4_hdmi->hsm_clock); clk_disable_unprepare(vc4_hdmi->pixel_clock); |