bcm27xx: add kernel 5.10 support

Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 283 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.10/950-0385-mcp251xfd-add-overlay.patch b/target/linux/bcm27xx/patches-5.10/950-0385-mcp251xfd-add-overlay.patch
new file mode 100644
index 0000000000..8d5d1927fc
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.10/950-0385-mcp251xfd-add-overlay.patch
@@ -0,0 +1,283 @@
+From 6a028ad5aed9e68280c9ccf6d4ca5370fcfdb4a2 Mon Sep 17 00:00:00 2001
+From: Marc Kleine-Budde <mkl@pengutronix.de>
+Date: Fri, 15 Nov 2019 00:54:07 +0100
+Subject: [PATCH] mcp251xfd: add overlay
+
+Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
+---
+ arch/arm/boot/dts/overlays/Makefile           |   1 +
+ arch/arm/boot/dts/overlays/README             |  22 ++
+ .../boot/dts/overlays/mcp251xfd-overlay.dts   | 226 ++++++++++++++++++
+ 3 files changed, 249 insertions(+)
+ create mode 100644 arch/arm/boot/dts/overlays/mcp251xfd-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -108,6 +108,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ 	mcp23s17.dtbo \
+ 	mcp2515-can0.dtbo \
+ 	mcp2515-can1.dtbo \
++	mcp251xfd.dtbo \
+ 	mcp3008.dtbo \
+ 	mcp3202.dtbo \
+ 	mcp342x.dtbo \
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -1779,6 +1779,28 @@ Params: oscillator              Clock fr
+         interrupt               GPIO for interrupt signal
+ 
+ 
++Name:   mcp251xfd
++Info:   Configures the MCP251XFD CAN controller family
++        For devices on spi1 or spi2, the interfaces should be enabled
++        with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
++Load:   dtoverlay=mcp251xfd,<param>=<val>
++Params: spi<n>-<m>              Configure device at spi<n>, cs<m>
++                                (boolean, required)
++
++        oscillator              Clock frequency for the CAN controller (Hz)
++
++        speed                   Maximum SPI frequence (Hz)
++
++        interrupt               GPIO for interrupt signal
++
++        rx_interrupt            GPIO for RX interrupt signal (nINT1) (optional)
++
++        xceiver_enable          GPIO for CAN transceiver enable (optional)
++
++        xceiver_active_high     specifiy if CAN transceiver enable pin is
++                                active high (optional, default: active low)
++
++
+ Name:   mcp3008
+ Info:   Configures MCP3008 A/D converters
+         For devices on spi1 or spi2, the interfaces should be enabled
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/mcp251xfd-overlay.dts
+@@ -0,0 +1,226 @@
++// SPDX-License-Identifier: (GPL-2.0 OR MIT)
++
++/dts-v1/;
++/plugin/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/pinctrl/bcm2835.h>
++
++/ {
++	compatible = "brcm,bcm2835";
++
++	fragment@0 {
++		target = <&spidev0>;
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@1 {
++		target = <&spidev1>;
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@2 {
++		target-path = "spi1/spidev@0";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@3 {
++		target-path = "spi1/spidev@1";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@4 {
++		target-path = "spi1/spidev@2";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@5 {
++		target-path = "spi2/spidev@0";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@6 {
++		target-path = "spi2/spidev@1";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@7 {
++		target-path = "spi2/spidev@2";
++		__dormant__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@8 {
++		target = <&gpio>;
++		__overlay__ {
++			mcp251xfd_pins: mcp251xfd_pins {
++				brcm,pins = <25>;
++				brcm,function = <BCM2835_FSEL_GPIO_IN>;
++			};
++		};
++	};
++
++	fragment@9 {
++		target-path = "/clocks";
++		__overlay__ {
++			clk_mcp251xfd_osc: mcp251xfd-osc {
++				#clock-cells = <0>;
++				compatible = "fixed-clock";
++				clock-frequency = <40000000>;
++			};
++		};
++	};
++
++	mcp251xfd_frag: fragment@10 {
++		target = <&spi0>;
++		__overlay__ {
++			status = "okay";
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			mcp251xfd: mcp251xfd@0 {
++				compatible = "microchip,mcp251xfd";
++				reg = <0>;
++				pinctrl-names = "default";
++				pinctrl-0 = <&mcp251xfd_pins>;
++				spi-max-frequency = <20000000>;
++				interrupt-parent = <&gpio>;
++				interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
++				clocks = <&clk_mcp251xfd_osc>;
++			};
++		};
++	};
++
++	fragment@11 {
++		target = <&mcp251xfd>;
++		mcp251xfd_rx_int_gpios: __dormant__ {
++			microchip,rx-int-gpios = <&gpio 255 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	fragment@12 {
++		target = <&gpio>;
++		__dormant__ {
++			mcp251xfd_xceiver_pins: mcp251xfd_xceiver_pins {
++				brcm,pins = <255>;
++				brcm,function = <BCM2835_FSEL_GPIO_OUT>;
++			};
++		};
++	};
++
++	fragment@13 {
++		target-path = "/";
++		__dormant__ {
++			reg_mcp251xfd_xceiver: reg_mcp251xfd_xceiver {
++				compatible = "regulator-fixed";
++				regulator-name = "mcp251xfd_xceiver";
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				gpio = <&gpio 4 GPIO_ACTIVE_HIGH>;
++				pinctrl-names = "default";
++				pinctrl-0 = <&mcp251xfd_xceiver_pins>;
++			};
++		};
++	};
++
++	fragment@14 {
++		target = <&mcp251xfd>;
++		__dormant__ {
++			xceiver-supply = <&reg_mcp251xfd_xceiver>;
++		};
++	};
++
++	__overrides__ {
++		spi0-0 = <0>, "+0",
++			<&mcp251xfd_frag>, "target:0=", <&spi0>,
++			<&mcp251xfd>, "reg:0=0",
++			<&mcp251xfd_pins>, "name=mcp251xfd_spi0_0_pins",
++			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi0-0-osc",
++			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi0_0_xceiver_pins",
++			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi0-0-xceiver",
++			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi0-0-xceiver";
++		spi0-1 = <0>, "+1",
++			<&mcp251xfd_frag>, "target:0=", <&spi0>,
++			<&mcp251xfd>, "reg:0=1",
++			<&mcp251xfd_pins>, "name=mcp251xfd_spi0_1_pins",
++			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi0-1-osc",
++			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi0_1_xceiver_pins",
++			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi0-1-xceiver",
++			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi0-1-xceiver";
++		spi1-0 = <0>, "+2",
++			<&mcp251xfd_frag>, "target:0=", <&spi1>,
++			<&mcp251xfd>, "reg:0=0",
++			<&mcp251xfd_pins>, "name=mcp251xfd_spi1_0_pins",
++			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi1-0-osc",
++			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi1_0_xceiver_pins",
++			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi1-0-xceiver",
++			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi1-0-xceiver";
++		spi1-1 = <0>, "+3",
++			<&mcp251xfd_frag>, "target:0=", <&spi1>,
++			<&mcp251xfd>, "reg:0=1",
++			<&mcp251xfd_pins>, "name=mcp251xfd_spi1_1_pins",
++			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi1-1-osc",
++			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi1_1_xceiver_pins",
++			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi1-1-xceiver",
++			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi1-1-xceiver";
++		spi1-2 = <0>, "+4",
++			<&mcp251xfd_frag>, "target:0=", <&spi1>,
++			<&mcp251xfd>, "reg:0=2",
++			<&mcp251xfd_pins>, "name=mcp251xfd_spi1_2_pins",
++			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi1-2-osc",
++			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi1_2_xceiver_pins",
++			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi1-2-xceiver",
++			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi1-2-xceiver";
++		spi2-0 = <0>, "+5",
++			<&mcp251xfd_frag>, "target:0=", <&spi2>,
++			<&mcp251xfd>, "reg:0=0",
++			<&mcp251xfd_pins>, "name=mcp251xfd_spi2_0_pins",
++			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi2-0-osc",
++			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi2_0_xceiver_pins",
++			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi2-0-xceiver",
++			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi2-0-xceiver";
++		spi2-1 = <0>, "+6",
++			<&mcp251xfd_frag>, "target:0=", <&spi2>,
++			<&mcp251xfd>, "reg:0=1",
++			<&mcp251xfd_pins>, "name=mcp251xfd_spi2_1_pins",
++			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi2-1-osc",
++			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi2_1_xceiver_pins",
++			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi2-1-xceiver",
++			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi2-1-xceiver";
++		spi2-2 = <0>, "+7",
++			<&mcp251xfd_frag>, "target:0=", <&spi2>,
++			<&mcp251xfd>, "reg:0=2",
++			<&mcp251xfd_pins>, "name=mcp251xfd_spi2_2_pins",
++			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi2-2-osc",
++			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi2_2_xceiver_pins",
++			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi2-2-xceiver",
++			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi2-2-xceiver";
++		oscillator = <&clk_mcp251xfd_osc>, "clock-frequency:0";
++		speed = <&mcp251xfd>, "spi-max-frequency:0";
++		interrupt = <&mcp251xfd_pins>, "brcm,pins:0",
++			<&mcp251xfd>, "interrupts:0";
++		rx_interrupt = <0>, "+11",
++			<&mcp251xfd_pins>, "brcm,pins:4",
++			<&mcp251xfd_rx_int_gpios>, "microchip,rx-int-gpios:4";
++		xceiver_enable = <0>, "+12+13+14",
++			<&mcp251xfd_xceiver_pins>, "brcm,pins:0",
++			<&reg_mcp251xfd_xceiver>, "gpio:4";
++		xceiver_active_high = <&reg_mcp251xfd_xceiver>, "enable-active-high?";
++	};
++};