bcm27xx: add kernel 5.10 support

Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 29 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.10/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch b/target/linux/bcm27xx/patches-5.10/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch
new file mode 100644
index 0000000000..ffd59bc969
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.10/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch
@@ -0,0 +1,29 @@
+From a79b4327445a827be28b9939592da8e812a19b29 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 23 Feb 2016 17:26:48 +0000
+Subject: [PATCH] amba_pl011: Don't use DT aliases for numbering
+
+The pl011 driver looks for DT aliases of the form "serial<n>",
+and if found uses <n> as the device ID. This can cause
+/dev/ttyAMA0 to become /dev/ttyAMA1, which is confusing if the
+other serial port is provided by the 8250 driver which doesn't
+use the same logic.
+---
+ drivers/tty/serial/amba-pl011.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -2599,7 +2599,12 @@ static int pl011_setup_port(struct devic
+ 	if (IS_ERR(base))
+ 		return PTR_ERR(base);
+ 
++	/* Don't use DT serial<n> aliases - it causes the device to
++	   be renumbered to ttyAMA1 if it is the second serial port in the
++	   system, even though the other one is ttyS0. The 8250 driver
++	   doesn't use this logic, so always remains ttyS0.
+ 	index = pl011_probe_dt_alias(index, dev);
++	*/
+ 
+ 	uap->old_cr = 0;
+ 	uap->port.dev = dev;