aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorDavid Musil <0x444d@protonmail.com>2022-04-16 12:01:31 +0000
committerPetr Štetiar <ynezz@true.cz>2022-04-18 07:25:22 +0200
commitad5a507df3de951ca8c87656f3bc7bda647ae4d3 (patch)
tree44244951facc95b80cb54c9b54eb896acd468eaa /target/linux/ath79
parentb78db9daa4ad6ac58aa488b9e9f047e94632289a (diff)
downloadupstream-ad5a507df3de951ca8c87656f3bc7bda647ae4d3.tar.gz
upstream-ad5a507df3de951ca8c87656f3bc7bda647ae4d3.tar.bz2
upstream-ad5a507df3de951ca8c87656f3bc7bda647ae4d3.zip
ath79: add support for MikroTik RouterBOARD wAP-2nD (wAP)
The MikroTik RouterBOARD wAP-2nd (sold as wAP) is a small 2.4 GHz 802.11b/g/n PoE-capable AP. Specifications: - SoC: Qualcomm Atheros QCA9533 - Flash: 16 MB (SPI) - RAM: 64 MB - Ethernet: 1x 10/100 Mbps (PoE in) - WiFi: AR9531 2T2R 2.4 GHz (SoC) - 3x green LEDs (1x lan, 1x wlan, 1x user) See https://mikrotik.com/product/RBwAP2nD for more info. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d The network setup avoids using the integrated switch and connects the single Ethernet port directly. This way, link speed (10/100 Mbps) is properly reported by eth0. Signed-off-by: David Musil <0x444d@protonmail.com> (cherry picked from commit e20de224427008e0f26161f924bc347d974fd15a)
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts58
-rw-r--r--target/linux/ath79/image/mikrotik.mk8
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds3
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom1
5 files changed, 71 insertions, 1 deletions
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts
new file mode 100644
index 0000000000..807941c608
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_mikrotik_routerboard-16m.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-wap-2nd", "qca,qca9533";
+ model = "MikroTik RouterBOARD wAP-2nD (wAP)";
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_lan_pin>;
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&eth1 {
+ compatible = "syscon", "simple-mfd";
+};
+
+&pinmux {
+ led_lan_pin: pinmux_led_lan_pin {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+};
diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk
index dccb05e45a..a0ce33fa9d 100644
--- a/target/linux/ath79/image/mikrotik.mk
+++ b/target/linux/ath79/image/mikrotik.mk
@@ -90,3 +90,11 @@ define Device/mikrotik_routerboard-wapr-2nd
IMAGE_SIZE := 16256k
endef
TARGET_DEVICES += mikrotik_routerboard-wapr-2nd
+
+define Device/mikrotik_routerboard-wap-2nd
+ $(Device/mikrotik_nor)
+ SOC := qca9533
+ DEVICE_MODEL := RouterBOARD wAP-2nD (wAP)
+ IMAGE_SIZE := 16256k
+endef
+TARGET_DEVICES += mikrotik_routerboard-wap-2nd
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
index ecc47e07c2..f5b927ea96 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
@@ -7,7 +7,8 @@ board=$(board_name)
case "$board" in
mikrotik,routerboard-lhg-2nd|\
-mikrotik,routerboard-mapl-2nd)
+mikrotik,routerboard-mapl-2nd|\
+mikrotik,routerboard-wap-2nd)
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
;;
mikrotik,routerboard-lhg-5nd)
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index cc4121f93e..797d1bba1f 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -19,6 +19,7 @@ ath79_setup_interfaces()
mikrotik,routerboard-lhg-5nd|\
mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
+ mikrotik,routerboard-wap-2nd|\
mikrotik,routerboard-wap-g-5hact2hnd|\
mikrotik,routerboard-wapr-2nd)
ucidef_set_interface_lan "eth0"
@@ -43,6 +44,7 @@ ath79_setup_macs()
mikrotik,routerboard-lhg-5nd|\
mikrotik,routerboard-mapl-2nd|\
mikrotik,routerboard-sxt-5nd-r2|\
+ mikrotik,routerboard-wap-2nd|\
mikrotik,routerboard-wap-g-5hact2hnd|\
mikrotik,routerboard-wapr-2nd)
label_mac="$mac_base"
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 8b1b5f04dd..3bfcfcc461 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -27,6 +27,7 @@ case "$FIRMWARE" in
mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-lhg-5nd|\
mikrotik,routerboard-sxt-5nd-r2|\
+ mikrotik,routerboard-wap-2nd|\
mikrotik,routerboard-wapr-2nd)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 1)
;;