aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/mikrotik
diff options
context:
space:
mode:
authorRoger Pueyo Centelles <roger.pueyo@guifi.net>2020-06-09 12:30:35 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-08-12 14:03:17 +0200
commit7a705c067f729e1f6edf4945985ec4f5761ca0ab (patch)
tree45db249607e55022c73cfbd994e3148173b63e0c /target/linux/ath79/mikrotik
parented19ba04e89ea102c2fb5431d63e0601936dc448 (diff)
downloadupstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.tar.gz
upstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.tar.bz2
upstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.zip
ath79: add support for MikroTik RouterBOARD LHG 2nD
The MikroTik RouterBOARD LHG 2nD (sold as LHG 2) is a 2.4 GHz 802.11b/g/n outdoor device with a feed and an integrated dual polarization grid dish antenna based on the LHG-HB platform. See https://mikrotik.com/product/lhg_2 for more info. Specifications: - SoC: Qualcomm Atheros QCA9533 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 18 dBi antenna - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 12-28 Vdc PoE in - 8 user-controllable LEDs: · 1x power (blue) · 1x user (green) · 1x lan (green) · 1x wlan (green) · 4x rssi (green) Note: The rssihigh LED is disabled, as it shares GPIO 16 with the reset button. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [rebase, remove rssiled setup, adjust commit message, add DTSIs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/mikrotik')
-rwxr-xr-xtarget/linux/ath79/mikrotik/base-files/etc/board.d/01_leds18
-rwxr-xr-xtarget/linux/ath79/mikrotik/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom6
3 files changed, 26 insertions, 0 deletions
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..adbaee1266
--- /dev/null
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+boardname="${board##*,}"
+
+case "$board" in
+mikrotik,routerboard-lhg-2nd)
+ ucidef_set_led_netdev "lan" "lan" "mikrotik:green:lan" "eth0"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index 5d87e88beb..c6384378ca 100755
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -16,6 +16,7 @@ ath79_setup_interfaces()
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
mikrotik,routerboard-922uags-5hpacd|\
+ mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-wap-g-5hact2hnd)
ucidef_set_interface_lan "eth0"
;;
@@ -34,6 +35,7 @@ ath79_setup_macs()
local mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)"
case "$board" in
+ mikrotik,routerboard-lhg-2nd|\
mikrotik,routerboard-wap-g-5hact2hnd)
label_mac="$mac_base"
lan_mac="$mac_base"
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index d16190d803..61c323552b 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -12,6 +12,12 @@ board=$(board_name)
case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
+ mikrotik,routerboard-lhg-2nd)
+ caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE
+ ath9k_patch_mac $(macaddr_add "$mac_base" +1) /tmp/$FIRMWARE
+ caldata_sysfsload_from_file /tmp/$FIRMWARE 0x0 0x440
+ rm -f /tmp/$FIRMWARE
+ ;;
mikrotik,routerboard-wap-g-5hact2hnd)
caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE
ath9k_patch_mac $(macaddr_add "$mac_base" +2) /tmp/$FIRMWARE