From 7a705c067f729e1f6edf4945985ec4f5761ca0ab Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Tue, 9 Jun 2020 12:30:35 +0200 Subject: ath79: add support for MikroTik RouterBOARD LHG 2nD MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MikroTik RouterBOARD LHG 2nD (sold as LHG 2) is a 2.4 GHz 802.11b/g/n outdoor device with a feed and an integrated dual polarization grid dish antenna based on the LHG-HB platform. See https://mikrotik.com/product/lhg_2 for more info. Specifications: - SoC: Qualcomm Atheros QCA9533 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 18 dBi antenna - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 12-28 Vdc PoE in - 8 user-controllable LEDs: · 1x power (blue) · 1x user (green) · 1x lan (green) · 1x wlan (green) · 4x rssi (green) Note: The rssihigh LED is disabled, as it shares GPIO 16 with the reset button. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles [rebase, remove rssiled setup, adjust commit message, add DTSIs] Signed-off-by: Adrian Schmutzler --- .../ath79/mikrotik/base-files/etc/board.d/01_leds | 18 ++++++++++++++++++ .../ath79/mikrotik/base-files/etc/board.d/02_network | 2 ++ .../base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 6 ++++++ 3 files changed, 26 insertions(+) create mode 100755 target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds (limited to 'target/linux/ath79/mikrotik') diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..adbaee1266 --- /dev/null +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds @@ -0,0 +1,18 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) +boardname="${board##*,}" + +case "$board" in +mikrotik,routerboard-lhg-2nd) + ucidef_set_led_netdev "lan" "lan" "mikrotik:green:lan" "eth0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index 5d87e88beb..c6384378ca 100755 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -16,6 +16,7 @@ ath79_setup_interfaces() "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" ;; mikrotik,routerboard-922uags-5hpacd|\ + mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd) ucidef_set_interface_lan "eth0" ;; @@ -34,6 +35,7 @@ ath79_setup_macs() local mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)" case "$board" in + mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd) label_mac="$mac_base" lan_mac="$mac_base" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index d16190d803..61c323552b 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,6 +12,12 @@ board=$(board_name) case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in + mikrotik,routerboard-lhg-2nd) + caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE + ath9k_patch_mac $(macaddr_add "$mac_base" +1) /tmp/$FIRMWARE + caldata_sysfsload_from_file /tmp/$FIRMWARE 0x0 0x440 + rm -f /tmp/$FIRMWARE + ;; mikrotik,routerboard-wap-g-5hact2hnd) caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE ath9k_patch_mac $(macaddr_add "$mac_base" +2) /tmp/$FIRMWARE -- cgit v1.2.3