diff options
| author | Tobias Schramm <tobleminer@gmail.com> | 2020-01-01 10:01:48 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2020-01-14 09:38:32 +0100 |
| commit | 66eb88edb66d49939bda444ff36ea4bf0aaf9ae1 (patch) | |
| tree | ecdc9b1adda9e47513d7f4498f99f74485a325be /target/linux/ath79/image | |
| parent | 2e05d6185aca35e75f64ab63ddd822166712f6aa (diff) | |
| download | upstream-66eb88edb66d49939bda444ff36ea4bf0aaf9ae1.tar.gz upstream-66eb88edb66d49939bda444ff36ea4bf0aaf9ae1.tar.bz2 upstream-66eb88edb66d49939bda444ff36ea4bf0aaf9ae1.zip | |
ath79: add support for Ubiquiti EdgeSwitch/ToughSwitch 5XP
The Ubiquiti ToughSwitch 5XP is a 5-port PoE Gigabit switch with a single
Fast-Ethernet management port. It supports both 24V passive PoE out on all
five ports.
Flash: 8 MB
RAM: 64 MB
SoC: AR7242
Switch: ar8327
USB: 1x USB 2.0
Ethernet: 5x GbE, 1x FE
Installation of the firmware is possible either via serial + tftpboot or
the factory firmware update function via webinterface.
By default the single Fast-Ethernet port labeled "MGMT" is configured
as the WAN port. Thus access to the device is only possible via the
five switch ports.
Serial: 3v3 115200 8n1
The serial header is located in the lower left corner of the switches PCB:
```
|
|
|
| o
| o RX
| o TX
| o GND
|
|
++ +-++-+ ++ ++ +
+--+ ++ +--++--++--+
```
Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
[remove ubnt,sw compatible - fix spelling - wrap commit message -
remove superfluous phy-mode property]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/image')
| -rw-r--r-- | target/linux/ath79/image/generic-ubnt.mk | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 87e7f5cc32..78364caffe 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -129,6 +129,12 @@ define Device/ubnt_bullet-m-xw endef TARGET_DEVICES += ubnt_bullet-m-xw +define Device/ubnt_edgeswitch-5xp + $(Device/ubnt-sw) + DEVICE_MODEL := EdgeSwitch 5XP +endef +TARGET_DEVICES += ubnt_edgeswitch-5xp + define Device/ubnt_edgeswitch-8xp $(Device/ubnt-sw) DEVICE_MODEL := EdgeSwitch 8XP |