From 66eb88edb66d49939bda444ff36ea4bf0aaf9ae1 Mon Sep 17 00:00:00 2001 From: Tobias Schramm Date: Wed, 1 Jan 2020 10:01:48 +0100 Subject: ath79: add support for Ubiquiti EdgeSwitch/ToughSwitch 5XP The Ubiquiti ToughSwitch 5XP is a 5-port PoE Gigabit switch with a single Fast-Ethernet management port. It supports both 24V passive PoE out on all five ports. Flash: 8 MB RAM: 64 MB SoC: AR7242 Switch: ar8327 USB: 1x USB 2.0 Ethernet: 5x GbE, 1x FE Installation of the firmware is possible either via serial + tftpboot or the factory firmware update function via webinterface. By default the single Fast-Ethernet port labeled "MGMT" is configured as the WAN port. Thus access to the device is only possible via the five switch ports. Serial: 3v3 115200 8n1 The serial header is located in the lower left corner of the switches PCB: ``` | | | | o | o RX | o TX | o GND | | ++ +-++-+ ++ ++ + +--+ ++ +--++--++--+ ``` Signed-off-by: Tobias Schramm [remove ubnt,sw compatible - fix spelling - wrap commit message - remove superfluous phy-mode property] Signed-off-by: David Bauer --- target/linux/ath79/image/generic-ubnt.mk | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'target/linux/ath79/image') diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 87e7f5cc32..78364caffe 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -129,6 +129,12 @@ define Device/ubnt_bullet-m-xw endef TARGET_DEVICES += ubnt_bullet-m-xw +define Device/ubnt_edgeswitch-5xp + $(Device/ubnt-sw) + DEVICE_MODEL := EdgeSwitch 5XP +endef +TARGET_DEVICES += ubnt_edgeswitch-5xp + define Device/ubnt_edgeswitch-8xp $(Device/ubnt-sw) DEVICE_MODEL := EdgeSwitch 8XP -- cgit v1.2.3