diff options
| author | David Bauer <mail@david-bauer.net> | 2020-09-11 18:32:05 +0200 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2020-09-17 18:07:39 +0200 |
| commit | b7da0d294465d5ab8d923f3b8265ece0a5847ac3 (patch) | |
| tree | 51f6e7712cdd3f7559181dfbc04d6eb8098afc71 /target/linux/ath79/generic/base-files | |
| parent | caf727767ab5c8f8d884ef458c74726a8e610d96 (diff) | |
| download | upstream-b7da0d294465d5ab8d923f3b8265ece0a5847ac3.tar.gz upstream-b7da0d294465d5ab8d923f3b8265ece0a5847ac3.tar.bz2 upstream-b7da0d294465d5ab8d923f3b8265ece0a5847ac3.zip | |
ath79: add support for Ubiquiti UniFi AP Pro
This adds support for the Ubiquiti UniFi AP Pro to the ath79 target. The
device was previously supported on the now removed ar71xx target.
SoC Atheros AR9344
WiFi Atheros AR9344 & Atheros AR9280
ETH Atheros AR8327
RAM 128M DDR2
FLASH 16M SPI-NOR
Installation
------------
Follow the Ubiquiti TFTP recovery procedure for this device.
1. Hold down the reset button while connecting power for 10 seconds.
2. Transfer the factory image via TFTP to the AP (192.168.1.20)
3. Wait 2 minutes for the AP to write the firmware to flash. The device
will automatically reboot to OpenWrt.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic/base-files')
| -rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/02_network | 4 | ||||
| -rw-r--r-- | target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 1 |
2 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 40ea14fa9b..518ca6f91a 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -371,6 +371,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan:1" "3:lan:2" ;; + ubnt,unifi-ap-pro) + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" + ;; zbtlink,zbt-wd323|\ xiaomi,mi-router-4q) ucidef_set_interface_wan "eth1" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 3983b1f8c0..88d43e25c4 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -98,6 +98,7 @@ case "$FIRMWARE" in tplink,tl-wdr4300-v1-il|\ tplink,tl-wdr4310-v1|\ tplink,tl-wdr4900-v2|\ + ubnt,unifi-ap-pro|\ winchannel,wb2000) caldata_extract "art" 0x5000 0x440 ;; |