diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-10-27 14:40:37 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2019-10-27 18:03:56 +0100 |
| commit | b288c56e1e0b4a45579169906845c90b61e5ace4 (patch) | |
| tree | fc1a85950d44fdc2c79296d7e720bbe64eb49cb7 /target/linux/ath79/generic/base-files/etc | |
| parent | 62db255543c8fb5d1787caf36c6c7c9c51db71cd (diff) | |
| download | upstream-b288c56e1e0b4a45579169906845c90b61e5ace4.tar.gz upstream-b288c56e1e0b4a45579169906845c90b61e5ace4.tar.bz2 upstream-b288c56e1e0b4a45579169906845c90b61e5ace4.zip | |
ath79: move base-files for ZyXEL NBG6716
Due to rebase of the base-files split patch after adding support
for the ZyXEL NBG6716, its base-files were added to the generic
subtarget, although the device belongs to the nand subtarget.
This moves the definitions to their proper locations.
Fixes: 0130022baec0 ("ath79: split base-files into subtargets")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[improve commit message, rebase]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc')
3 files changed, 0 insertions, 16 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 7507c6584c..90f622b262 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -261,10 +261,6 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "3:lan:1" "4:lan:2" ;; - zyxel,nbg6716) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1" - ;; *) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; @@ -399,10 +395,6 @@ ath79_setup_macs() wd,mynet-wifi-rangeextender) lan_mac=$(nvram get et0macaddr) ;; - zyxel,nbg6716) - lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2) - wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3) - ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index f1bc6c3c22..4b07660f02 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -47,10 +47,6 @@ case "$FIRMWARE" in caldata_extract "radiocfg" 0x1000 0x440 ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac") ;; - zyxel,nbg6716) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) - ;; *) caldata_die "board $board is not supported yet" ;; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 91e813f121..b2ec803a72 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -113,10 +113,6 @@ case "$FIRMWARE" in ubnt,unifiac-pro) caldata_extract "EEPROM" 0x5000 0x844 ;; - zyxel,nbg6716) - caldata_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) - ;; esac ;; "ath10k/pre-cal-pci-0000:00:00.0.bin") |