diff options
| author | Daniel Golle <daniel@makrotopia.org> | 2020-02-02 18:09:50 +0200 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2020-02-21 22:35:12 +0100 |
| commit | d1130ad265b994d1b23972bab8c99787759686d0 (patch) | |
| tree | c3de6200baa637d3734fbfb90672eeba9777a1a1 /target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches | |
| parent | e5e461b62135146210e85b8b973927c650ddb808 (diff) | |
| download | upstream-d1130ad265b994d1b23972bab8c99787759686d0.tar.gz upstream-d1130ad265b994d1b23972bab8c99787759686d0.tar.bz2 upstream-d1130ad265b994d1b23972bab8c99787759686d0.zip | |
ath79: add support for Teltonika RUT955
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344)
- built-in 4G/3G module (example: Quectel EC-25EU)
- internal microSD slot (spi-mmc, buggy and disabled for now)
- RS232 on D-Sub9 port (Cypress ACM via USB, /dev/ttyACM0)
- RS422/RS485 (AR934x high speed UART, /dev/ttyATH1)
- analog 0-24V input (MCP3221)
- various digital inputs and outputs incl. a relay
- 11x LED (4 are driven by AR9344, 7 by 74HC595)
- 2x miniSIM slot (can be swapped via GPIO)
- 2x RP-SMA/F (Wi-Fi), 3x SMA/F (2x WWAN, GPS)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- debugging UART available on PCB edge connector
Serial console (/dev/ttyS0) pinout:
- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side
Flash instruction:
Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.06.051" firmware and U-Boot "3.0.2".
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches')
| -rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches index 967e2c7680..b5b46f16bf 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches @@ -38,6 +38,14 @@ dlink,dir-835-a1) librerouter,librerouter-v1) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0" ;; +teltonika,rut955) + ucidef_add_gpio_switch "sim_sel" "SIM select" "503" "1" + ucidef_add_gpio_switch "DOUT1" "DOUT1 (OC)" "504" "0" + ucidef_add_gpio_switch "DOUT2" "DOUT2 (Relay)" "505" "0" + ucidef_add_gpio_switch "modem_vbus" "Modem enable" "506" "1" + ucidef_add_gpio_switch "modem_rst" "Modem reset" "507" "0" + ucidef_add_gpio_switch "DOUT3" "DOUT3" "508" "0" + ;; tplink,archer-c25-v1) ucidef_add_gpio_switch "led_control" "LED control" "21" "0" ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1" |