diff options
| author | Andreas Wiese <aw-openwrt@meterriblecrew.net> | 2020-05-27 15:31:30 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-31 15:44:05 +0200 |
| commit | c764c512ac18ce9724b3fb0e476831150817c162 (patch) | |
| tree | 1e9d99d246846b38ba5e8ca95160a073ba967c03 /target/linux/ath79/generic/base-files/etc/board.d/01_leds | |
| parent | 7e513136c63108bf55b38be4d2b65aa00b0d2b26 (diff) | |
| download | upstream-c764c512ac18ce9724b3fb0e476831150817c162.tar.gz upstream-c764c512ac18ce9724b3fb0e476831150817c162.tar.bz2 upstream-c764c512ac18ce9724b3fb0e476831150817c162.zip | |
ath79: add support for TP-Link RE450 v3
TP-Link RE450 v3 is a dual band router/range-extender based on
Qualcomm/Atheros QCA9563 + QCA9880.
This device is nearly identical to RE450 v2 besides a modified flash
layout (hence I think force-flashing a RE450v2 image will lead to at
least loss of MAC address).
Specification:
- 775 MHz CPU
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 1x 10/100/1000 Mbps Ethernet (AR8033 PHY)
- 7x LED, 4x button-
- possible UART header on PCB¹
Flash instruction:
Apply factory image in OEM firmware web-gui.
¹ Didn't check to connect as I didn't even manage to connect on
RE450v2 (AFAIU it requires disconnecting some resistors, which I was
too much of a coward to do). But given the similarities to v2 I
think it's the same or very similar procedure (and most likely also
the only way to debrick).
Signed-off-by: Andreas Wiese <aw-openwrt@meterriblecrew.net>
[remove dts-v1 and compatible in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc/board.d/01_leds')
| -rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/01_leds | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index d4fdb423ab..5521379cea 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -248,7 +248,8 @@ tplink,tl-wr902ac-v1) ;; tplink,re355-v1|\ tplink,re450-v1|\ -tplink,re450-v2) +tplink,re450-v2|\ +tplink,re450-v3) ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link" ;; |