diff options
author | Chuanhong Guo <gch981213@gmail.com> | 2018-08-02 15:14:10 +0800 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-08-06 07:31:54 +0200 |
commit | 8288af1e18adfe68bc556df93521881d1e5d0eda (patch) | |
tree | be3cb352858cba82fc68b0a70cf8d3c1d78963b6 /target/linux/ath79/dts/qca9563_phicomm-k2t.dts | |
parent | 2da431e5839019bf83da2c83559430ac237bd537 (diff) | |
download | upstream-8288af1e18adfe68bc556df93521881d1e5d0eda.tar.gz upstream-8288af1e18adfe68bc556df93521881d1e5d0eda.tar.bz2 upstream-8288af1e18adfe68bc556df93521881d1e5d0eda.zip |
ath79: rename dts/image using manufacturer_board scheme
This helps getting rid of SUPPORTED_DEVICES which can be
auto-generated in image/Makefile.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Diffstat (limited to 'target/linux/ath79/dts/qca9563_phicomm-k2t.dts')
-rw-r--r-- | target/linux/ath79/dts/qca9563_phicomm-k2t.dts | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/target/linux/ath79/dts/qca9563_phicomm-k2t.dts b/target/linux/ath79/dts/qca9563_phicomm-k2t.dts deleted file mode 100644 index 4ff9320d5c..0000000000 --- a/target/linux/ath79/dts/qca9563_phicomm-k2t.dts +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "qca956x.dtsi" - -/ { - model = "Phicomm K2T"; - compatible = "phicomm,k2t"; - - aliases { - led-status = &status_red; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - status_blue { - label = "phicomm:blue:status"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - status_red: status_red { - label = "phicomm:red:status"; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - status_yellow { - label = "phicomm:yellow:status"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; - - reset { - linux,code = <KEY_RESTART>; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&spi { - num-cs = <1>; - - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x30000>; - read-only; - }; - - partition@30000 { - label = "config"; - reg = <0x030000 0x10000>; - read-only; - }; - - partition@40000 { - label = "permanent"; - reg = <0x040000 0x50000>; - read-only; - }; - - partition@90000 { - label = "firmware"; - reg = <0x090000 0xf60000>; - }; - - art: partition@ff0000 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy-mask = <0>; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "sgmii"; - - qca,ar8327-initvals = < - 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ - 0x10 0x81000080 /* POWER_ON_STRIP */ - 0x50 0xcc35cc35 /* LED_CTRL0 */ - 0x54 0xcb37cb37 /* LED_CTRL1 */ - 0x58 0x00000000 /* LED_CTRL2 */ - 0x5c 0x00f3cf00 /* LED_CTRL3 */ - 0x7c 0x0000007e /* PORT0_STATUS */ - >; - }; -}; - -ð0 { - status = "okay"; - - pll-data = <0x03000101 0x00000101 0x00001919>; - - phy-mode = "sgmii"; - phy-handle = <&phy0>; -}; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; -}; |