diff options
| author | Edward Chow <equu@openmail.cc> | 2023-01-02 19:24:20 +0800 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-01-28 21:28:25 +0100 |
| commit | 2a20dc717a897efe54f241636ee1566b695dbc7d (patch) | |
| tree | adac97a793f169c2957beec38a54ff692a16b737 /target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi | |
| parent | a7f3a51982be34270d9b10283f6d188bd54fc7a1 (diff) | |
| download | upstream-2a20dc717a897efe54f241636ee1566b695dbc7d.tar.gz upstream-2a20dc717a897efe54f241636ee1566b695dbc7d.tar.bz2 upstream-2a20dc717a897efe54f241636ee1566b695dbc7d.zip | |
ath79: calibrate dlink dir-825 c1 and dir-835 a1 with nvmem
Driver for both soc (2.4GHz Wifi) and pci (5 GHz) now pull the calibration
data from the nvmem subsystem.
This allows us to move the userspace caldata extraction for the pci-e ath9k
supported wifi into the device-tree definition of the device.
Currently, "mac-address-ascii" cells only works for ethernet and wmac devices,
so PCI ath9k device uses the old method to calibrate.
Signed-off-by: Edward Chow <equu@openmail.cc>
Diffstat (limited to 'target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi')
| -rw-r--r-- | target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi | 42 |
1 files changed, 38 insertions, 4 deletions
diff --git a/target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi b/target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi index 33c75f4967..8e21b0dd9e 100644 --- a/target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi +++ b/target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi @@ -29,6 +29,9 @@ /* default for ar934x, except for 1000M */ pll-data = <0x06000000 0x00000101 0x00001616>; + nvmem-cells = <&macaddr_lan>; + nvmem-cell-names = "mac-address-ascii"; + phy-mode = "rgmii"; phy-handle = <&phy0>; }; @@ -55,7 +58,13 @@ ath9k: wifi@0,0 { compatible = "pci168c,0030"; reg = <0x0000 0 0 0 0>; - qca,no-eeprom; + /* "mac-address-ascii" currently does not work for + ath9k pci devices. these below are retained for future + improvements. */ + /* nvmem-cells = <&macaddr_wan>, <&cal_art_5000>; + nvmem-cell-names = "mac-address-ascii", "calibration"; + mac-address-increment = <1>; */ + qca,no-eeprom; /* remove this when "mac-address-ascii" works */ gpio-controller; #gpio-cells = <2>; }; @@ -102,16 +111,40 @@ read-only; }; - partition@fe0000 { + mac: partition@fe0000 { label = "mac"; reg = <0xfe0000 0x010000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_lan: macaddr@4 { + reg = <0x4 0x11>; + }; + + macaddr_wan: macaddr@18 { + reg = <0x18 0x11>; + }; }; - partition@ff0000 { + art: partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + cal_art_1000: cal@1000 { + reg = <0x1000 0x440>; + }; + + cal_art_5000: cal@5000 { + reg = <0x5000 0x440>; + }; }; }; }; @@ -127,5 +160,6 @@ &wmac { status = "okay"; - qca,no-eeprom; + nvmem-cells = <&macaddr_lan>, <&cal_art_1000>; + nvmem-cell-names = "mac-address-ascii", "calibration"; }; |