diff options
author | Pawel Dembicki <paweldembicki@gmail.com> | 2018-11-17 08:47:40 +0000 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-11-26 12:16:52 +0100 |
commit | 20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c (patch) | |
tree | 514411700431f59bb7f7b6aa5141338f7e4498df /target/linux/ath79/dts/ar7241_ubnt_unifi.dts | |
parent | b85fe43ec8c4d4aa34d3c0bbb3e57da3f176526b (diff) | |
download | upstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.tar.gz upstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.tar.bz2 upstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.zip |
ramips: add support for Lava LR-25G001
The Lava LR-25G001 Wireless Router is based on the MT7620A SoC.
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7610EN)
- 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN)
- 2x external, detachable antennas
- 1x USB 2.0
- UART (J3) header on PCB (57600 8n1)
- 8x LED (3x GPIO-controlled), 2x button
- JBOOT bootloader
Known issues:
- Work only three Gigabit ports (3/5, 1 WAN and 2LAN)
Installation:
Apply factory image via http web-gui or JBOOT recovery page
How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ath79/dts/ar7241_ubnt_unifi.dts')
0 files changed, 0 insertions, 0 deletions