aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-08-07 01:59:23 +0900
committerMathias Kresin <dev@kresin.me>2018-08-09 18:44:57 +0200
commit23519edbcaa9cfd24b5a6fff44770f0fa9e13f3c (patch)
treecdd6d5bfa0fb10a97dcac2910223502109141a51 /target/linux/ath79/base-files
parent2e02fdb3637c7a0320d230a3232d61e874c1e4d1 (diff)
downloadupstream-23519edbcaa9cfd24b5a6fff44770f0fa9e13f3c.tar.gz
upstream-23519edbcaa9cfd24b5a6fff44770f0fa9e13f3c.tar.bz2
upstream-23519edbcaa9cfd24b5a6fff44770f0fa9e13f3c.zip
ath79: add support for Buffalo BHR-4GRV2
Buffalo BHR-4GRV2 is a wired router, based on Qualcomm Atheros QCA9558. Ported from ar71xx target. Specification: - Qualcomm Atheros QCA9558 - 64 MB of RAM - 16 MB of Flash - 5x 10/100/1000 Ethernet - QCA8337N - 4x LEDs, 2x keys - UART header on PCB - Vcc, TX, RX, GND from LED side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of BHR-4GRV2 2. Connect power cable to BHR-4GRV2 and turn on it 3. Access to "http://192.168.12.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click update ("更新実行") button 5. Wait ~120 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/base-files')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/base-files/lib/upgrade/platform.sh4
2 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 9ec78ece23..573bc80462 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -25,6 +25,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
+ buffalo,bhr-4grv2)
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
+ ;;
embeddedwireless,dorin)
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh
index dfcf70487b..08039e0052 100644
--- a/target/linux/ath79/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh
@@ -13,6 +13,10 @@ platform_do_upgrade() {
local board=$(board_name)
case "$board" in
+ buffalo,bhr-4grv2)
+ PART_NAME="rootfs:kernel"
+ default_do_upgrade "$ARGV"
+ ;;
*)
default_do_upgrade "$ARGV"
;;