aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-05-09 14:55:16 +0200
committerChristian Lamparter <chunkeey@gmail.com>2019-06-10 11:25:47 +0200
commitfde0abf267033bfaaf08dc2f5cbba2bf2a3ff897 (patch)
tree956ec52bbdec2b5e4aa1418f859dad31817a5b1c /target/linux/ath79/base-files/etc
parent409940cef46e1c6ffd2e448f21abda8967e6ed5d (diff)
downloadupstream-fde0abf267033bfaaf08dc2f5cbba2bf2a3ff897.tar.gz
upstream-fde0abf267033bfaaf08dc2f5cbba2bf2a3ff897.tar.bz2
upstream-fde0abf267033bfaaf08dc2f5cbba2bf2a3ff897.zip
ath79: Add support for TP-Link Archer C25 v1
The TP-Link Archer C25 is a low-cost dual-band router. Specification: - CPU: Atheros QCA9561 775 MHz - RAM: 64 MB - Flash: 8 MB - Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887 - NET: 5x 10/100 Mbps Ethernet Some LEDs are controlled by an additional 74HC595 chip, but not all of them as e.g. for the C59. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds19
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/03_gpio_switches4
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata4
4 files changed, 19 insertions, 9 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 38927be33b..41a4abae18 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -126,6 +126,16 @@ tplink,archer-c6-v2)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
;;
+tplink,archer-c25-v1|\
+tplink,tl-wr841-v9|\
+tplink,tl-wr841-v11|\
+tplink,tl-wr842n-v3)
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+ ;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
@@ -175,15 +185,6 @@ tplink,tl-wr842n-v2)
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
-tplink,tl-wr841-v9|\
-tplink,tl-wr841-v11|\
-tplink,tl-wr842n-v3)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
- ;;
ubnt,bullet-m|\
ubnt,bullet-m-xw|\
ubnt,nanostation-m|\
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 99e7825c67..84c83ff01e 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -68,6 +68,7 @@ ath79_setup_interfaces()
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
buffalo,wzr-hp-ag300h|\
+ tplink,archer-c25-v1|\
tplink,tl-mr3220-v1|\
tplink,tl-mr3420-v1|\
tplink,tl-wr841-v7|\
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
index 1c8a46df19..7f40285daf 100755
--- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
@@ -23,6 +23,10 @@ dlink,dir-835-a1)
librerouter,librerouter-v1)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0"
;;
+tplink,archer-c25-v1)
+ ucidef_add_gpio_switch "led_control" "LED control" "21" "0"
+ ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1"
+ ;;
ubnt,nanostation-ac)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c3bdc94866..b96c9a00b5 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -137,6 +137,10 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
+ tplink,archer-c25-v1)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 8) -1)
+ ;;
tplink,archer-a7-v5|\
tplink,archer-c2-v3|\
tplink,archer-c7-v4|\