aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
diff options
context:
space:
mode:
authorChristian Mehlis <christian@m3hlis.de>2017-02-26 12:25:57 +0100
committerJohn Crispin <john@phrozen.org>2017-03-30 09:57:22 +0200
commitdc4eae7a8cf676911b0048b1e73c6f9adeea2f06 (patch)
treeaabdb124ca654ccb242f3588231bfbdf1ca6c402 /target/linux/ar71xx/files
parent967b6be118e3217e8d6a28df9c615d3255e7b1ae (diff)
downloadupstream-dc4eae7a8cf676911b0048b1e73c6f9adeea2f06.tar.gz
upstream-dc4eae7a8cf676911b0048b1e73c6f9adeea2f06.tar.bz2
upstream-dc4eae7a8cf676911b0048b1e73c6f9adeea2f06.zip
ar71xx: Compex WPJ563 support
Specification: - SoC: Qualcomm Atheros QCA9563 (775 MHz, MIPS 74Kc) - RAM: 128 MiB - Storage: 16MB NOR flash - Wireless: Built into QCA9563 (Dragonfly), PHY modes b/g/n, 3x3 MIMO - Ethernet: 2x1G Tested and working: - ethernet / switch / lan / wan - 2.4GHz SoC wifi - PCIe - leds - buzzer Ramload: - tftpboot 0x84000000 lede-ar71xx-generic-wpj563-16M-initramfs-uImage.bin - bootm 0x84000000 Install: - tftpboot 0x80500000 lede-ar71xx-generic-wpj563-16M-squashfs-sysupgrade.bin - erase 0x9f030000 +$filesize - erase 0x9f680000 +1 - cp.b $fileaddr 0x9f030000 $filesize Erasing 0x9f680000 is required because uboot defines "bootcmd=bootm 0x9f680000 || bootm 0x9f030000", so it first tries to boot the higher address. I think the 16 mb flash are intended to be used as 8+8mb for a fallback image. In my hardware only the lower address has a bootable image. But to make sure future hardware will boot lede too, I erase one block, so uboot will skip this address. Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Diffstat (limited to 'target/linux/ar71xx/files')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt11
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c150
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
4 files changed, 163 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 669e02684f..183e91a41d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -459,6 +459,17 @@ config ATH79_MACH_WPJ558
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_WPJ563
+ bool "Compex WPJ563 board support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_XD3200
bool "YunCore XD3200 support"
select SOC_QCA956X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 1180d4d73b..01ec1332b0 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -231,6 +231,7 @@ obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o
obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o
obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o
obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o
+obj-$(CONFIG_ATH79_MACH_WPJ563) += mach-wpj563.o
obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
obj-$(CONFIG_ATH79_MACH_WRTNODE2Q) += mach-wrtnode2q.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c
new file mode 100644
index 0000000000..70593d8168
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c
@@ -0,0 +1,150 @@
+/*
+ * Compex WPJ563 board support
+ *
+ * Copyright (c) 2015 Qualcomm Atheros
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define WPJ563_GPIO_LED_SIG1 1
+#define WPJ563_GPIO_LED_SIG2 5
+#define WPJ563_GPIO_LED_SIG3 6
+#define WPJ563_GPIO_LED_SIG4 7
+#define WPJ563_GPIO_BUZZER 19
+
+#define WPJ563_GPIO_BTN_RESET 2
+#define WPJ563_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WPJ563_KEYS_DEBOUNCE_INTERVAL (3 * WPJ563_KEYS_POLL_INTERVAL)
+
+#define WPJ563_MAC0_OFFSET 0x10
+#define WPJ563_MAC1_OFFSET 0x18
+#define WPJ563_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led WPJ563_leds_gpio[] __initdata = {
+ {
+ .name = "wpj563:green:sig1",
+ .gpio = WPJ563_GPIO_LED_SIG1,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj563:green:sig2",
+ .gpio = WPJ563_GPIO_LED_SIG2,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj563:green:sig3",
+ .gpio = WPJ563_GPIO_LED_SIG3,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj563:green:sig4",
+ .gpio = WPJ563_GPIO_LED_SIG4,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj563:buzzer",
+ .gpio = WPJ563_GPIO_BUZZER,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button WPJ563_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPJ563_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPJ563_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg WPJ563_ar8337_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data WPJ563_ar8337_data = {
+ .pad0_cfg = &WPJ563_ar8337_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info WPJ563_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &WPJ563_ar8337_data,
+ },
+};
+
+static void __init WPJ563_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(WPJ563_leds_gpio),
+ WPJ563_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WPJ563_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(WPJ563_gpio_keys),
+ WPJ563_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + WPJ563_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_register_pci();
+
+ mdiobus_register_board_info(WPJ563_mdio0_info,
+ ARRAY_SIZE(WPJ563_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ563_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ563_MAC1_OFFSET, 0);
+
+ /* GMAC0 is connected to an QCA8334 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_WPJ563, "WPJ563", "Compex WPJ563", WPJ563_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index b9cc243f39..4278f5ed77 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -303,6 +303,7 @@ enum ath79_mach_type {
ATH79_MACH_WPJ344, /* Compex WPJ344 */
ATH79_MACH_WPJ531, /* Compex WPJ531 */
ATH79_MACH_WPJ558, /* Compex WPJ558 */
+ ATH79_MACH_WPJ563, /* Compex WPJ563 */
ATH79_MACH_WPN824N, /* NETGEAR WPN824N */
ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
ATH79_MACH_WRT400N, /* Linksys WRT400N */