ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

3 files changed, 0 insertions, 192 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
deleted file mode 100644
index e476d57e45..0000000000
--- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  Atheros AR71xx SoC specific platform data definitions
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ATH79_PLATFORM_H
-#define __ASM_MACH_ATH79_PLATFORM_H
-
-#include <linux/if_ether.h>
-#include <linux/skbuff.h>
-#include <linux/phy.h>
-#include <linux/spi/spi.h>
-
-struct ag71xx_switch_platform_data {
-	u8		phy4_mii_en:1;
-	u8		phy_poll_mask;
-};
-
-struct ag71xx_platform_data {
-	phy_interface_t	phy_if_mode;
-	u32		phy_mask;
-	int		speed;
-	int		duplex;
-	u32		reset_bit;
-	u8		mac_addr[ETH_ALEN];
-	struct device	*mii_bus_dev;
-
-	u8		has_gbit:1;
-	u8		is_ar91xx:1;
-	u8		is_ar7240:1;
-	u8		is_ar724x:1;
-	u8		has_ar8216:1;
-	u8		use_flow_control:1;
-	u8		enable_sgmii_fixup:1;
-	u8		disable_inline_checksum_engine:1;
-
-	struct ag71xx_switch_platform_data *switch_data;
-
-	void		(*ddr_flush)(void);
-	void		(*set_speed)(int speed);
-	void		(*update_pll)(u32 pll_10, u32 pll_100, u32 pll_1000);
-
-	unsigned int	max_frame_len;
-	unsigned int	desc_pktlen_mask;
-};
-
-struct ag71xx_mdio_platform_data {
-	u32		phy_mask;
-	u8		builtin_switch:1;
-	u8		is_ar7240:1;
-	u8		is_ar9330:1;
-	u8		is_ar934x:1;
-	unsigned long	mdio_clock;
-	unsigned long	ref_clock;
-
-	void		(*reset)(struct mii_bus *bus);
-};
-
-#endif /* __ASM_MACH_ATH79_PLATFORM_H */
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h
deleted file mode 100644
index 50d5a20974..0000000000
--- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  MikroTik RouterBOARD 750 definitions
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-#ifndef _MACH_RB750_H
-#define _MACH_RB750_H
-
-#include <linux/bitops.h>
-
-#define RB750_GPIO_LVC573_LE	0	/* Latch enable on LVC573 */
-#define RB750_GPIO_NAND_IO0	1	/* NAND I/O 0 */
-#define RB750_GPIO_NAND_IO1	2	/* NAND I/O 1 */
-#define RB750_GPIO_NAND_IO2	3	/* NAND I/O 2 */
-#define RB750_GPIO_NAND_IO3	4	/* NAND I/O 3 */
-#define RB750_GPIO_NAND_IO4	5	/* NAND I/O 4 */
-#define RB750_GPIO_NAND_IO5	6	/* NAND I/O 5 */
-#define RB750_GPIO_NAND_IO6	7	/* NAND I/O 6 */
-#define RB750_GPIO_NAND_IO7	8	/* NAND I/O 7 */
-#define RB750_GPIO_NAND_NCE	11	/* NAND Chip Enable (active low) */
-#define RB750_GPIO_NAND_RDY	12	/* NAND Ready */
-#define RB750_GPIO_NAND_CLE	14	/* NAND Command Latch Enable */
-#define RB750_GPIO_NAND_ALE	15	/* NAND Address Latch Enable */
-#define RB750_GPIO_NAND_NRE	16	/* NAND Read Enable (active low) */
-#define RB750_GPIO_NAND_NWE	17	/* NAND Write Enable (active low) */
-
-#define RB750_GPIO_BTN_RESET	1
-#define RB750_GPIO_SPI_CS0	2
-#define RB750_GPIO_LED_ACT	12
-#define RB750_GPIO_LED_PORT1	13
-#define RB750_GPIO_LED_PORT2	14
-#define RB750_GPIO_LED_PORT3	15
-#define RB750_GPIO_LED_PORT4	16
-#define RB750_GPIO_LED_PORT5	17
-
-#define RB750_LED_ACT		BIT(RB750_GPIO_LED_ACT)
-#define RB750_LED_PORT1		BIT(RB750_GPIO_LED_PORT1)
-#define RB750_LED_PORT2		BIT(RB750_GPIO_LED_PORT2)
-#define RB750_LED_PORT3		BIT(RB750_GPIO_LED_PORT3)
-#define RB750_LED_PORT4		BIT(RB750_GPIO_LED_PORT4)
-#define RB750_LED_PORT5		BIT(RB750_GPIO_LED_PORT5)
-#define RB750_NAND_NCE		BIT(RB750_GPIO_NAND_NCE)
-
-#define RB750_LVC573_LE		BIT(RB750_GPIO_LVC573_LE)
-
-#define RB750_LED_BITS	(RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
-			 RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
-
-#define RB7XX_GPIO_NAND_NCE	0
-#define RB7XX_GPIO_MON		9
-#define RB7XX_GPIO_LED_ACT	11
-#define RB7XX_GPIO_USB_POWERON	13
-
-#define RB7XX_NAND_NCE		BIT(RB7XX_GPIO_NAND_NCE)
-#define RB7XX_LED_ACT		BIT(RB7XX_GPIO_LED_ACT)
-#define RB7XX_MONITOR		BIT(RB7XX_GPIO_MON)
-#define RB7XX_USB_POWERON	BIT(RB7XX_GPIO_USB_POWERON)
-
-struct rb750_led_data {
-	char	*name;
-	char	*default_trigger;
-	u32	mask;
-	int	active_low;
-};
-
-struct rb750_led_platform_data {
-	int			num_leds;
-	struct rb750_led_data	*leds;
-	void			(*latch_change)(u32 clear, u32 set);
-};
-
-struct rb7xx_nand_platform_data {
-	u32 nce_line;
-
-	void (*enable_pins)(void);
-	void (*disable_pins)(void);
-	void (*latch_change)(u32, u32);
-};
-
-#endif /* _MACH_RB750_H */
\ No newline at end of file
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
deleted file mode 100644
index 37512ba1a1..0000000000
--- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on the patches for Linux 2.6.27.39 published by
- * MikroTik for their RouterBoard 4xx series devices.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define CPLD_GPIO_nLED1		0
-#define CPLD_GPIO_nLED2		1
-#define CPLD_GPIO_nLED3		2
-#define CPLD_GPIO_nLED4		3
-#define CPLD_GPIO_FAN		4
-#define CPLD_GPIO_ALE		5
-#define CPLD_GPIO_CLE		6
-#define CPLD_GPIO_nCE		7
-#define CPLD_GPIO_nLED5		8
-
-#define CPLD_NUM_GPIOS		9
-
-#define CPLD_CFG_nLED1		BIT(CPLD_GPIO_nLED1)
-#define CPLD_CFG_nLED2		BIT(CPLD_GPIO_nLED2)
-#define CPLD_CFG_nLED3		BIT(CPLD_GPIO_nLED3)
-#define CPLD_CFG_nLED4		BIT(CPLD_GPIO_nLED4)
-#define CPLD_CFG_FAN		BIT(CPLD_GPIO_FAN)
-#define CPLD_CFG_ALE		BIT(CPLD_GPIO_ALE)
-#define CPLD_CFG_CLE		BIT(CPLD_GPIO_CLE)
-#define CPLD_CFG_nCE		BIT(CPLD_GPIO_nCE)
-#define CPLD_CFG_nLED5		BIT(CPLD_GPIO_nLED5)
-
-struct rb4xx_cpld_platform_data {
-	unsigned	gpio_base;
-};
-
-extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
-extern int rb4xx_cpld_read(unsigned char *rx_buf,
-			   unsigned cnt);
-extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);