ar71xx: add support for ALFA Network AP121F

ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users.
Device is based on Atheros AR9331 WiSoC and is running a custom version
(updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware.

Specification:

- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR1)
- 16 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 1T1R 2.4 GHz
- 1x microSD (optional, on separate PCB)
- 3x LED, 1x button, 1x switch
- UART header on PCB

Flash instruction (under U-Boot web recovery mode):

1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with RJ45 port, press the reset button, power up device,
   wait for first blink of all LEDs (indicates network setup), then keep
   button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

1 files changed, 103 insertions, 0 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c
new file mode 100644
index 0000000000..955b7faf63
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c
@@ -0,0 +1,103 @@
+/*
+ * ALFA Network AP121F board support
+ *
+ * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP121F_GPIO_LED_LAN	17
+#define AP121F_GPIO_LED_VPN	27
+#define AP121F_GPIO_LED_WLAN	0
+
+#define AP121F_GPIO_MICROSD_EN	26
+
+#define AP121F_GPIO_BTN_RESET	12
+#define AP121F_GPIO_BTN_SWITCH	21
+
+#define AP121F_KEYS_POLL_INTERVAL	20
+#define AP121F_KEYS_DEBOUNCE_INTERVAL	(3 * AP121F_KEYS_POLL_INTERVAL)
+
+#define AP121F_WMAC_CALDATA_OFFSET	0x1000
+
+static struct gpio_led ap121f_leds_gpio[] __initdata = {
+	{
+		.name		= "ap121f:green:lan",
+		.gpio		= AP121F_GPIO_LED_LAN,
+		.active_low	= 1,
+	}, {
+		.name		= "ap121f:green:vpn",
+		.gpio		= AP121F_GPIO_LED_VPN,
+		.active_low	= 1,
+	}, {
+		.name		= "ap121f:green:wlan",
+		.gpio		= AP121F_GPIO_LED_WLAN,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_button ap121f_gpio_keys[] __initdata = {
+	{
+		.desc			= "reset",
+		.type			= EV_KEY,
+		.code			= KEY_RESTART,
+		.debounce_interval	= AP121F_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= AP121F_GPIO_BTN_RESET,
+		.active_low		= 1,
+	}, {
+		.desc			= "switch",
+		.type			= EV_KEY,
+		.code			= BTN_0,
+		.debounce_interval	= AP121F_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= AP121F_GPIO_BTN_SWITCH,
+		.active_low		= 0,
+	},
+};
+
+static void __init ap121f_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1f040000);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_setup_ar933x_phy4_switch(false, false);
+
+	/* LAN */
+	ath79_register_mdio(0, 0x0);
+	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+	ath79_register_eth(0);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121f_leds_gpio),
+				 ap121f_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, AP121F_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(ap121f_gpio_keys),
+					ap121f_gpio_keys);
+
+	gpio_request_one(AP121F_GPIO_MICROSD_EN,
+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "microSD enable");
+
+	ath79_register_wmac(art + AP121F_WMAC_CALDATA_OFFSET, NULL);
+
+	ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP121F, "AP121F", "ALFA Network AP121F", ap121f_setup);