ar71xx: merge files-3.2 to files

SVN-Revision: 30405

3 files changed, 0 insertions, 170 deletions

diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
deleted file mode 100644
index 43e67557ae..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  Atheros AR71xx SoC specific platform data definitions
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ATH79_PLATFORM_H
-#define __ASM_MACH_ATH79_PLATFORM_H
-
-#include <linux/if_ether.h>
-#include <linux/skbuff.h>
-#include <linux/phy.h>
-#include <linux/spi/spi.h>
-
-struct ag71xx_switch_platform_data {
-	u8		phy4_mii_en:1;
-};
-
-struct ag71xx_platform_data {
-	phy_interface_t	phy_if_mode;
-	u32		phy_mask;
-	int		speed;
-	int		duplex;
-	u32		reset_bit;
-	u8		mac_addr[ETH_ALEN];
-	struct device	*mii_bus_dev;
-
-	u8		has_gbit:1;
-	u8		is_ar91xx:1;
-	u8		is_ar7240:1;
-	u8		is_ar724x:1;
-	u8		has_ar8216:1;
-
-	struct ag71xx_switch_platform_data *switch_data;
-
-	void		(*ddr_flush)(void);
-	void		(*set_speed)(int speed);
-
-	u32		fifo_cfg1;
-	u32		fifo_cfg2;
-	u32		fifo_cfg3;
-};
-
-struct ag71xx_mdio_platform_data {
-	u32		phy_mask;
-	int		is_ar7240;
-};
-
-#endif /* __ASM_MACH_ATH79_PLATFORM_H */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h
deleted file mode 100644
index 3e6fc50c55..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *  MikroTik RouterBOARD 750 definitions
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-#ifndef _MACH_RB750_H
-#define _MACH_RB750_H
-
-#include <linux/bitops.h>
-
-#define RB750_GPIO_LVC573_LE	0	/* Latch enable on LVC573 */
-#define RB750_GPIO_NAND_IO0	1	/* NAND I/O 0 */
-#define RB750_GPIO_NAND_IO1	2	/* NAND I/O 1 */
-#define RB750_GPIO_NAND_IO2	3	/* NAND I/O 2 */
-#define RB750_GPIO_NAND_IO3	4	/* NAND I/O 3 */
-#define RB750_GPIO_NAND_IO4	5	/* NAND I/O 4 */
-#define RB750_GPIO_NAND_IO5	6	/* NAND I/O 5 */
-#define RB750_GPIO_NAND_IO6	7	/* NAND I/O 6 */
-#define RB750_GPIO_NAND_IO7	8	/* NAND I/O 7 */
-#define RB750_GPIO_NAND_NCE	11	/* NAND Chip Enable (active low) */
-#define RB750_GPIO_NAND_RDY	12	/* NAND Ready */
-#define RB750_GPIO_NAND_CLE	14	/* NAND Command Latch Enable */
-#define RB750_GPIO_NAND_ALE	15	/* NAND Address Latch Enable */
-#define RB750_GPIO_NAND_NRE	16	/* NAND Read Enable (active low) */
-#define RB750_GPIO_NAND_NWE	17	/* NAND Write Enable (active low) */
-
-#define RB750_GPIO_BTN_RESET	1
-#define RB750_GPIO_SPI_CS0	2
-#define RB750_GPIO_LED_ACT	12
-#define RB750_GPIO_LED_PORT1	13
-#define RB750_GPIO_LED_PORT2	14
-#define RB750_GPIO_LED_PORT3	15
-#define RB750_GPIO_LED_PORT4	16
-#define RB750_GPIO_LED_PORT5	17
-
-#define RB750_LED_ACT		BIT(RB750_GPIO_LED_ACT)
-#define RB750_LED_PORT1		BIT(RB750_GPIO_LED_PORT1)
-#define RB750_LED_PORT2		BIT(RB750_GPIO_LED_PORT2)
-#define RB750_LED_PORT3		BIT(RB750_GPIO_LED_PORT3)
-#define RB750_LED_PORT4		BIT(RB750_GPIO_LED_PORT4)
-#define RB750_LED_PORT5		BIT(RB750_GPIO_LED_PORT5)
-
-#define RB750_LVC573_LE		BIT(RB750_GPIO_LVC573_LE)
-
-#define RB750_LED_BITS	(RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
-			 RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
-
-struct rb750_led_data {
-	char	*name;
-	char	*default_trigger;
-	u32	mask;
-	int	active_low;
-};
-
-struct rb750_led_platform_data {
-	int			num_leds;
-	struct rb750_led_data	*leds;
-};
-
-int rb750_latch_change(u32 mask_clr, u32 mask_set);
-void rb750_nand_pins_enable(void);
-void rb750_nand_pins_disable(void);
-
-#endif /* _MACH_RB750_H */
\ No newline at end of file
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
deleted file mode 100644
index 5b17e94b64..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on the patches for Linux 2.6.27.39 published by
- * MikroTik for their RouterBoard 4xx series devices.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define CPLD_GPIO_nLED1		0
-#define CPLD_GPIO_nLED2		1
-#define CPLD_GPIO_nLED3		2
-#define CPLD_GPIO_nLED4		3
-#define CPLD_GPIO_FAN		4
-#define CPLD_GPIO_ALE		5
-#define CPLD_GPIO_CLE		6
-#define CPLD_GPIO_nCE		7
-#define CPLD_GPIO_nLED5		8
-
-#define CPLD_NUM_GPIOS		9
-
-#define CPLD_CFG_nLED1		BIT(CPLD_GPIO_nLED1)
-#define CPLD_CFG_nLED2		BIT(CPLD_GPIO_nLED2)
-#define CPLD_CFG_nLED3		BIT(CPLD_GPIO_nLED3)
-#define CPLD_CFG_nLED4		BIT(CPLD_GPIO_nLED4)
-#define CPLD_CFG_FAN		BIT(CPLD_GPIO_FAN)
-#define CPLD_CFG_ALE		BIT(CPLD_GPIO_ALE)
-#define CPLD_CFG_CLE		BIT(CPLD_GPIO_CLE)
-#define CPLD_CFG_nCE		BIT(CPLD_GPIO_nCE)
-#define CPLD_CFG_nLED5		BIT(CPLD_GPIO_nLED5)
-
-struct rb4xx_cpld_platform_data {
-	unsigned	gpio_base;
-};
-
-extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
-extern int rb4xx_cpld_read(unsigned char *rx_buf,
-			   const unsigned char *verify_buf,
-			   unsigned cnt);
-extern int rb4xx_cpld_read_from(unsigned addr,
-				unsigned char *rx_buf,
-				const unsigned char *verify_buf,
-				unsigned cnt);
-extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);