aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/config-4.4
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2017-10-15 13:24:02 +0200
committerPiotr Dymacz <pepe2k@gmail.com>2018-01-15 00:09:43 +0100
commit1f06144cdec1487122201faa9350825ed565d99c (patch)
tree6bfd763638f8fc308894dfa3420af8f55799d11d /target/linux/ar71xx/config-4.4
parentb38ff7847bdc915bd2a3ebfa8ff40b07867d6ae6 (diff)
downloadupstream-1f06144cdec1487122201faa9350825ed565d99c.tar.gz
upstream-1f06144cdec1487122201faa9350825ed565d99c.tar.bz2
upstream-1f06144cdec1487122201faa9350825ed565d99c.zip
ar71xx: add support for Teltonika RUT900
Teltonika RUT900 is an industrial 3G router based on Atheros AR9344. There are available 3 other models in RUT9xx series: RUT905, RUT950 and RUT955, which differ in availability of additional I/O ports, built-in GSM modem type, GPS antenna and other features. FCC ID of the RUT950 model (LTE module built-in): 2AET4-RUT950. This patch adds support for the RUT900 model only but can be easily extended to cover whole series. Also, as there are several different 3/4G modules (Huawei, Quectel, Telit) used in whole series, packages required for WWAN support are not included by default. It is up to the user to install required software for built-in modem. Specification: - 550/400/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1 - 2T2R 2,4 GHz (AR9344), with ext. PA (MGA-22103) and LNA - built-in 3G module (example: Telit HE910-D) - 2x miniSIM slot - 2x RP-SMA/F (Wi-Fi), 2x SMA/F (3G) - PCA9539 16-bit GPIO I2C expander - 12x LED (4 are driven by AR9344, 7 by PCA9539) - 1x button (reset) - DC jack for main power input (9-30 V) - UART available on PCB edge connector Serial console pinout: - RX: pin1 (square) on top side of the main PCB (AR9344 is on top) - TX: pin1 (square) on bottom side Flash instruction: Vendor firmware is based on OpenWrt CC release. Use the "factory" image directly in GUI (make sure to uncheck "keep settings") or in U-Boot web based recovery. To avoid any problems, make sure to first update vendor firmware to latest version - "factory" image was successfully tested on device running "RUT9XX_R_00.03.960" firmware and U-Boot "3.0.1". Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/config-4.4')
-rw-r--r--target/linux/ar71xx/config-4.41
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index c5bcc4061a..1dc7127bfb 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -165,6 +165,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_RBSPI is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
# CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RUT9XX is not set
# CONFIG_ATH79_MACH_RW2458N is not set
# CONFIG_ATH79_MACH_SC1750 is not set
# CONFIG_ATH79_MACH_SC300M is not set