aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@freemail.hu>2018-01-18 13:50:32 +0100
committerJohn Crispin <john@phrozen.org>2018-01-22 10:53:45 +0100
commiteb9e3651dd1a081e0d908e7e5162d6683098c1f3 (patch)
tree66a7ef1f012452bb76703e69aa6b36dedbfd8f5f /target/linux/ar71xx/base-files
parenta4320b3332fb76e17b403c2df2f0f9ad77aafb33 (diff)
downloadupstream-eb9e3651dd1a081e0d908e7e5162d6683098c1f3.tar.gz
upstream-eb9e3651dd1a081e0d908e7e5162d6683098c1f3.tar.bz2
upstream-eb9e3651dd1a081e0d908e7e5162d6683098c1f3.zip
ar71xx: add support for the MikroTik RB911-2Hn/5Hn boards
The patch adds support for the MikroTik RB911-2Hn (911 Lite2) and the RB911-5Hn (911 Lite5) boards: https://mikrotik.com/product/RB911-2Hn https://mikrotik.com/product/RB911-5Hn The two boards are using the same hardware design, the only difference between the two is the supported wireless band. Specifications: * SoC: Atheros AR9344 (600MHz) * RAM: 64MiB * Storage: 16 MiB SPI NOR flash * Ethernet: 1x100M (Passive PoE in) * Wireless: AR9344 built-in wireless MAC, single chain 802.11b/g/n (911-2Hn) or 802.11a/g/n (911-5Hn) Notes: * Older versions of these boards might be equipped with a NAND flash chip instead of the SPI NOR device. Those boards are not supported (yet). * The MikroTik RB911-5HnD (911 Lite5 Dual) board also uses the same hardware. Support for that can be added later with little effort probably. Installation: 1. Setup a DHCP/BOOTP Server with the following parameters: * DHCP-Option 66 (TFTP server name): pointing to a local TFTP server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name): matching the initramfs filename of the to be booted image. The usable intramfs files are: - openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf - openwrt-ar71xx-mikrotik-vmlinux-initramfs-lzma.elf - openwrt-ar71xx-mikrotik-rb-nor-flash-16M-initramfs-kernel.bin 2. Press the reset button on the board and keep that pressed. 3. Connect the board to your local network via its ethernet port. 4. Release the button after the LEDs on the board are turned off. Now the board should load and start the initramfs image from the TFTP server. 5. Upload the sysupgrade image to the board with scp: $ scp openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/fw.bin 5. Log in to the running system listening on 192.168.1.1 via ssh as root (without password): $ ssh root@192.168.1.1 7. Flash the uploaded firmware file from the ssh session via the sysupgrade command: root@OpenWrt:~# sysupgrade /tmp/fw.bin Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
Diffstat (limited to 'target/linux/ar71xx/base-files')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh2
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh6
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh4
5 files changed, 18 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index fb1f29dcfa..ecd3723c6a 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -292,6 +292,10 @@ rb-750up-r2)
ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04"
ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
;;
+rb-911-2hn|\
+rb-911-5hn)
+ ucidef_set_led_netdev "eth" "ETH" "rb:green:eth" "eth0"
+ ;;
rb-941-2nd)
ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 5a10a9f486..b0755c44dd 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -93,6 +93,8 @@ ar71xx_setup_interfaces()
pqi-air-pen|\
rb-411|\
rb-411u|\
+ rb-911-2hn|\
+ rb-911-5hn|\
rb-911g-2hpnd|\
rb-911g-5hpacd|\
rb-911g-5hpnd|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 2720288e3d..4f4a73ce06 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -319,6 +319,8 @@ get_status_led() {
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\
+ rb-911-2hn|\
+ rb-911-5hn|\
rb-911g-2hpnd|\
rb-911g-5hpacd|\
rb-911g-5hpnd|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index b6642495de..73bdce5853 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -941,6 +941,12 @@ ar71xx_board_detect() {
*"RouterBOARD 751G")
name="rb-751g"
;;
+ *"RouterBOARD 911-2Hn")
+ name="rb-911-2hn"
+ ;;
+ *"RouterBOARD 911-5Hn")
+ name="rb-911-5hn"
+ ;;
*"RouterBOARD 911G-2HPnD")
name="rb-911g-2hpnd"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 3d7b1593e1..1f9ed76fc3 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -660,6 +660,8 @@ platform_check_image() {
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\
+ rb-911-2hn|\
+ rb-911-5hn|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-952ui-5ac2nd|\
@@ -723,6 +725,8 @@ platform_pre_upgrade() {
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\
+ rb-911-2hn|\
+ rb-911-5hn|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-952ui-5ac2nd|\