ar71xx: add support for Nokia WI2A-AC200i

Specifications:
 - SoC: Qualcomm QCA9558 (720 MHz)
 - RAM: 256MB
 - Storage: 1MB NOR, 128 MB NAND flash
 - Ethernet: 1x1000M

Installation:
 1. Connect to serial console on the board
 2. Boot initramfs image over u-boot
 3. Copy image to the device and run sysupgrade

Installation without serial console is not supported at this time

Signed-off-by: Felix Fietkau <nbd@nbd.name>

6 files changed, 38 insertions, 0 deletions

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 80d195301b..0694fe954f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -824,6 +824,12 @@ r6100)
 	ucidef_set_led_usbdev "usb" "USB" "netgear:blue:usb" "1-1"
 	ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt"
 	;;
+wi2a-ac200i)
+	ucidef_set_led_default "power" "Power (green)" "nokia:green:power" "1"
+	ucidef_set_led_default "wan" "Ethernet LED (green)" "nokia:green:wan" "1"
+	ucidef_set_led_wlan "wlan5g" "WLAN" "nokia:green:wlan-5g" "phy0tpt"
+	ucidef_set_led_wlan "wlan2g" "WLAN" "nokia:green:wlan-2g" "phy1tpt"
+	;;
 wndr3700v4|\
 wndr4300)
 	ucidef_set_led_switch "wan-green" "WAN (green)" "netgear:green:wan" "switch0" "0x20" "0x08"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index d83835204a..46b217136d 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -128,6 +128,7 @@ ar71xx_setup_interfaces()
 	tl-wr902ac-v1|\
 	tube2h|\
 	unifiac-lite|\
+	wi2a-ac200i|\
 	wndap360|\
 	wp543)
 		ucidef_set_interface_lan "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index ade726f726..7fa4ff0bcc 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -459,6 +459,9 @@ get_status_led() {
 	airgatewaypro)
 		status_led="ubnt:white:status"
 		;;
+	wi2a-ac200i)
+		status_led="nokia:green:ctrl"
+		;;
 	whr-g301n|\
 	whr-hp-g300n|\
 	whr-hp-gn|\
@@ -529,6 +532,9 @@ set_state() {
 			local n=$(fw_printenv activeregion | cut -d = -f 2)
 			fw_setenv "image${n}trynum" 0
 			;;
+		wi2a-ac200i)
+			fw_setenv PKRstCnt 0
+			;;
 		esac
 		;;
 	esac
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 85a2a63022..9a5f82b7cd 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -111,6 +111,9 @@ case "$FIRMWARE" in
 	unifiac-pro)
 		ath10kcal_extract "EEPROM" 20480 2116
 		;;
+	wi2a-ac200i)
+		ath10kcal_extract "ART" 20480 2116
+		;;
 	esac
 	;;
 "ath10k/cal-pci-0000:01:00.0.bin")
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 835ced67f3..929845110a 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -1231,6 +1231,9 @@ ar71xx_board_detect() {
 	"WeIO"*)
 		name="weio"
 		;;
+	*"WI2A-AC200i")
+		name="wi2a-ac200i"
+		;;
 	*"WHR-G301N")
 		name="whr-g301n"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 778faeda5a..97d560189f 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -534,6 +534,7 @@ platform_check_image() {
 	nbg6716|\
 	r6100|\
 	rambutan|\
+	wi2a-ac200i|\
 	wndr3700v4|\
 	wndr4300)
 		nand_do_platform_check $board $1
@@ -708,6 +709,7 @@ platform_pre_upgrade() {
 	rb-2011uias-2hnd|\
 	rb-sxt2n|\
 	rb-sxt5n|\
+	wi2a-ac200i|\
 	wndr3700v4|\
 	wndr4300)
 		nand_do_upgrade "$1"
@@ -743,6 +745,23 @@ platform_nand_pre_upgrade() {
 		mtd erase kernel
 		tar xf "$1" sysupgrade-routerboard/kernel -O | nandwrite -o "$fw_mtd" -
 		;;
+	wi2a-ac200i)
+		case "$(fw_printenv -n dualPartition)" in
+			imgA)
+				fw_setenv dualPartition imgB
+				fw_setenv ActImg NokiaImageB
+			;;
+			imgB)
+				fw_setenv dualPartition imgA
+				fw_setenv ActImg NokiaImageA
+			;;
+		esac
+		ubiblock -r /dev/ubiblock0_0 2>/dev/null >/dev/null
+		rm -f /dev/ubiblock0_0
+		ubidetach -d 0 2>/dev/null >/dev/null
+		CI_UBIPART=ubi_alt
+		CI_KERNPART=kernel_alt
+		;;
 	esac
 }